Used Emcomat 14 for sale (9,728)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 4,993 h, load capacity: 1,400 kg, lifting height: 3,244 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,190 mm, fork length: 1,150 mm, drive type: Elektro, Stand-on forklift Load center: 600 mm Fgsdpfjx H Da Isx Al Ujh Fork width: 182 mm Fork thickness: 55 mm Mast type: Standard Condition: Refurbished without warranty Technical condition: Good Battery voltage: 24V Battery capacity: 250Ah Battery type: PzS Battery year: 2017

Condition: used, functionality: fully functional, machine/vehicle number: 8818, Year of construction: 2015, operating hours: 8,359 h, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 600 mm, fuel type: electric, mast type: duplex, construction height: 3,240 mm, empty load weight: 12,200 kg, total length: 4,780 mm, drive type: Elektro, construction width: 2,200 mm, Electric sideloader Chassis number: 8818 Load centre: 700 Mast type: Duplex Condition: Refurbished with warranty Fgedpfx Ajx Eky Ssl Ujh Technical condition: good Front tyres type: Pneumatic Front tyres size: 300x15 Front tyres condition: 40 - 60% Rear tyres type: Pneumatic Rear tyres size: 300x15 Rear tyres condition: 40 - 60% Battery voltage: 120V Battery type: PzS Rear working lights, front working lights, heater, full cab, CE certificate, joystick, Air-suspended driver's seat, working lights on mast and cab.

Condition: ready for operation (used), Bosch CC 220 FARB-PL1.0-14" / control panel with color monitor SN:874965. The item has been checked and tested! Used, with normal signs of wear, 100% functional. Scope of delivery as per photos. Fodpfx Alsx Eqw Ro Usgh

Condition: ready for operation (used), Heidenhain 324 955-14 interface board SN: 11 390 618, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% fully functional, scope of delivery as shown in the photos Fjdpfex Erudex Al Uogh

Condition: excellent (used), Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 2 rollers -Type: VICO FLEX-127-274-14-SF Fgsdpsx Ewlzsfx Al Ush -Material: AISI 304 -Width: 457 mm -Length: 10 m / 17.56 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: 1200/800/H740 mm -Total weight: 113 kg

Condition: used, functionality: fully functional, This listing is for a second-hand ‘Lotus LTS 14’ heat transfer press Item for sale: 1x Lotus LTS 14: Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested and is in working order Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Fjdpfjywtz Ajx Al Usgh Sea-worthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track -Manufacturer: Soco System, roller curve conveyor with drive, height adjustable -Rollers: Ø 54-80 x 355 mm -Speed: 14 m/min -Drive: 2x 0.12 kW, see photo of nameplate Fjdpfsywu Azjx Al Usgh -Transport dimensions: 1500/600/H840 mm -Weight: 64 kg

Condition: good (used), Approx. 50 open front storage bins / stacking and transport containers SSI Schäfer, type: 14/7-0a, 710/500x820x610mm – used -: Price per unit ex location: €59 (net)! Price for complete purchase: only €49 (net) per unit! Manufacturer: SSI Schäfer Type: 14/7-0a Fgjdpfsyzd Iusx Al Ujh Year of manufacture: unknown Colour: painted Material: metal Weight (kg): 35 Nominal dimensions (mm) LxWxH: 700x800x600 External dimensions (mm) LxWxH: 710/500x820x610 Load capacity (kg): 800 kg Stack load (kg): 2400 kg Wall thickness (mm): 1.25 Base thickness (mm): 2 Condition: good Available: immediately Location: Mettmann

Condition: good (used), gear, gears, gear shaft, pinion shaft -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 42 mm / 14 teeth -Tooth width: 83 mm -Dimensions: see photo technical drawing -Number: 9x gear shaft available -Price: per piece -Total dimensions: Ø 42 x 220 mm Fgedpswcxtzsfx Al Ujh -Weight: 0.9 kg/piece

Condition: good (used), Press brake tool, bending tool, die, upper knife, upper tool, straight tool Fedpfx Asw S Tczel Uegh -Bending tool: length 515 mm -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 515/14/H75 mm -Weight: 3.8 kg

Year of construction: 1992, condition: good (used), Lifting mast, stacker mast, forklift mast, lifting frame, sideloader -Manufacturer: Baumann, forklift mast from sideloader type E4S 25/14-13.5 -Load capacity: approx. 2500 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Transport dimensions: 3900/1445/H700 mm -Weight: 1630 kg Fsdoxaptqspfx Al Ujgh

Condition: ready for operation (used), Key Specifications – MBP 14‑Head C2T Series: MBP C2 (stainless steel, central-feed, food-grade) Number of Weigh Heads: 14 Weigh Height/Capacity: Up to 5,000 g per weighment Fodowqq Nkopfx Al Uegh Operating Speed: Up to ~180 weighments per minute Bucket Type: Smooth stainless-steel buckets – ideal for reducing product stickiness Drive & Controls: Stainless-steel construction for all product contact parts Step-motor‑controlled bucket gates ensure precise portion release Windows‑based multimedia control system with remote access/diagnostics Electrical Requirements: 230 V, 1‑phase, 60 Hz, 10 A Multivac R530 🔧 Key Specifications • Machine Dimensions: o Length: Approximately 6,600 mm to 8,500 mm, depending on configuration o Width: Approximately 1,050 mm to 1,200 mm o Height: Approximately 1,900 mm to 2,000 mm o Weight: Approximately 2,500 kg to 3,175 kg • Film Specifications: o Lower Film Width: Typically ranges from 420 mm to 528 mm o Upper Film Width: Typically ranges from 415 mm to 510 mm o Film Thickness: 50 to 500 microns, depending on material o Advance (Pitch): Commonly between 228 mm to 320 mm • Forming Area: o Length: Up to 521 mm o Width: Up to 400 mm o Depth: Up to 145 mm • Performance: o Cycles per Minute: Typically between 7 to 20, depending on application and configuration • Utilities: o Voltage: 400V, 3-phase, 50 Hz o Power Consumption: Approximately 19 kW o Compressed Air Requirement: 7 to 10 bar o Water Connection: 1.5 to 4.5 bar

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 18,748 h, load capacity: 5,000 kg, lifting height: 5,100 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,650 mm, fork carriage width: 1,300 mm, fork length: 1,390 mm, empty load weight: 8,400 kg, total length: 4,670 mm, drive type: Diesel, construction width: 2,150 mm, Sideload forklift Load center: 700 mm Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 3.00-15 Rear tires type: Pneumatic Rear tires size: 3.00-15 Fgsdpswx Sytjfx Al Ujh Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, industrial trucks, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive terms are always available. We are also happy to purchase your used machine, even if you are not buying a vehicle from us. Our proprietor, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this DX50/14/51. P.S.: Our master forklift workshop specializes in repairs, maintenance, refurbishment, and custom builds for forklifts with capacities from 8 tons. We will also gladly display your vehicle on our premises for commission-based sale. 1x NIVO fork Heater, full cabin, full free lift, Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 14,027 h, load capacity: 5,000 kg, lifting height: 7,200 mm, free lift: 2,280 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, fork carriage width: 1,330 mm, fork length: 1,400 mm, empty load weight: 9,710 kg, total length: 4,550 mm, drive type: Diesel, construction width: 2,140 mm, Sideload forklift Load center: 700 Fork width: 200 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Fgjdswx Syyepfx Al Ush Technical condition: very good Front tires type: Superelastic Front tires size: 355/45-15 Rear tires type: Superelastic Rear tires size: 355/45-15 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Leasing and financing are always available on attractive terms. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, is happy to provide detailed advice regarding this HX50/14/72TR. P.S.: Our master forklift workshop specializes in repair, servicing, overhauls, and custom builds for forklifts from 8 tons upwards. We can also offer commission sales for your vehicle. Heater, full cab, full free lift, Platform height: 820 mm; camera.

Year of construction: 2020, condition: new, functionality: fully functional, Equipment: documentation/manual, Package 14 PP6713 – CS6713 Brinox LEP 11 – GMP Chromatography System with CIP Skid New – unused – in original packaging Manufacturer: Brinox Model: LEP 11 Version: PP6713 with CIP System CS6713 Condition: New – in original packaging – never installed Description Offered is a pharmaceutical chromatography system LEP 11, consisting of the chromatography panel PP6713 and the corresponding CIP skid CS6713. The system is completely new, unused, and remains in the manufacturer’s original condition. The unit was designed for GMP-grade protein purification as part of C1-INH chromatography. System Features Cleanroom panel for wall integration Transfer lines to sieve-bottom tanks Precipitation vessel connection Gel waste disposal line Complete utility/process piping Technical Specifications Fgjdjyl Rnnopfx Al Uoh Design pressure: –0.9 to +6 bar Design temperature: +2 to +95 °C Electropolished surfaces Ra ≤ 0.8 µm Material: 1.4435 stainless steel Fully drainable GMP-compliant design CIP System CS6713 Stainless steel frame construction Centrifugal pump Shell-and-tube heat exchanger Conductivity, pressure, and temperature monitoring Adjustable CIP supply flow The system is brand new and has never been in operation.

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, complete wheels -Manufacturer: Dunlop, Power lifter M-B forklift tires with rim -Tire size: 18x7-8 14 PR -Bolt circle: Ø 146 x 19 mm Fsdpfxoywg Tfj Al Uegh -Hub bore: Ø 110 mm -Quantity: 1 tire available -Dimensions: Ø 440 x 175 mm -Weight: 19 kg

Condition: good (used), Year of construction: 2019, operating hours: 3,938 h, load capacity: 1,400 kg, lifting height: 5,016 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, empty load weight: 1,600 kg, mileage: 3,938 km, Electric triplex stacker Brand: Still (Germany) Year of manufacture: 2019 3,938 operating hours Capacity: 1,400 kg Lifting height: 5,016 mm Overall height: 2,165 mm Option: FREELIFT Battery: with charger Automatic filling system Video to follow Fgedpfx Aeyxhp Rel Uoh

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Fgodeyxp Twopfx Al Ueh Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: like new (used), Year of construction: 2011, operating hours: 6,313 h, load capacity: 1,400 kg, lifting height: 8,400 mm, fuel type: electric, mast type: triplex, construction height: 3,520 mm, Manufacturer + model: BT RRE 140 * EX * Miretti 2G / Zone 1 Mast: 3F8400 ID: 25013.7057 Category: Used Mast: 3F8400 Lowered height: 3520 mm Lifting height: 8400 mm Capacity: 1400 kg Year: 2011 Hours: 6313 hours Battery: Completely NEW * 48v/560ah * Year 2026 Options: * EX * MIRETTI !!!!! System = CEC 15 ATEX 161 Ref = E7207 Gas group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Temp. class = T2 Gb Fgsdpfx Aezv H S Nsl Ueh

Condition: new, mileage: 500 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #549 Mercedes Benz Arocs 2848 6x2 with Combined High-Pressure Jetting and Suction/Pressure ADR Tank Body Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2848 6x2, equipped with a combined KROLL high-pressure jetting and suction/pressure tank body, is a NEW vehicle featuring ADR L4BH, VacuStar 1600, Uraca KD 718, telescopic boom DN125, and a hose cassette. A premium, ready-for-use vehicle for demanding sewer, industrial, and hazardous material applications. Body • Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH • Hose cassette with telescopic boom DN 125 • Reach (pivot side): 5,200 mm • Tank material: S355J2+N (St 52.3) • ADR suction/pressure tank Type K 14.0 / 28 PE • Telescopic piston with 3 locking positions • Capability to suction from open water ("comfort version") via cassette boom with integrated filter • Tanker equipped per ADR – class type AT/FL L4BH • Discharge by pneumatically operated piston • Sludge water drain DN 80 for backflushing via the boom Vacuum system • CVS VacuStar 1600 – approx. 1,550 m³/h at 400 mbar • Hose cassette with telescopic boom DN 125 • Reach (pivot side): 5,200 mm • Additional suction hose reel with through-passage, right rear, approx. 30 m DN80 High-pressure system • Uraca KD 718 – approx. 315 l/min at 170 bar • Large high-pressure hose reel for 240 m DN 25, swivels 180° • Supplied with 160 m DN 25 • Small high-pressure hose reel for 80 m DN 13, hydraulic • Supplied with 80 m DN 13 Special Features Fgsdpfjxc Sy Eex Al Ush • Hose storage cassette with telescopic boom DN 125 • Continuous height adjustment of suction hose (hydraulic, trolley-guided) • Boom arm hydraulic, telescopic, swivels 180° • ADR L4BH, incl. EX/II, EX/III and AT • Spray gun • LED beacon • LED perimeter lighting • Remote-control operation of working functions via CAN-BUS • Radio remote control with 14 functions • Hot water hand-wash unit • Large locker at rear left (e.g., for push camera) • Reversing camera • Soundproofing of the pump compartment • Toolbox • Holder for traffic cones • Vise • Ladder • Advertising boards on both sides approx. 3,000 × 600 mm Special Equipment • Axle load measuring device • Front axle: 9.0 t • Digital radio DAB/DAB+ • ADR equipment package • Right-hand exterior mirror with maneuvering position • 220 Ah battery • Interactive multimedia cockpit • 24V / 100A electrical pre-wiring in cab • Main beam assistant & cornering light • Traffic sign recognition • Movable cab entry • Front springs: 9.0 t / 4 leaf • Tinted windscreen with band filter • ADR Type FL – speed limiter system • 16-speed gearbox G 280-16 • Gearbox lock (independent of gearbox) • Rear axle crown wheel 300 • 3-piece mudguards with splash protection • 430 l aluminum fuel tank (right) • Cooling box / refrigerator • Reinforced engine brake • Tag axle: 9 t, steered, liftable • Navigation system • PTO – smooth flange • PTO gearbox-independent & clutch-dependent MB 1.65 • Programmable special module • Rear overhang 1,650 mm • Smoker package – rain sensor • Tire pressure monitoring system • Reverse warning (audible) & hazard warning lights • Two additional remote keys • Circuit breaker • Comfort suspension seats for driver & co-driver • Armrest

Condition: used, Year of construction: 2017, operating hours: 1,158 h, load capacity: 1,400 kg, lifting height: 2,930 mm, fuel type: electric, gearing type: automatic, overall weight: 1,100 kg, empty load weight: 853 kg, color: orange, mileage: 1,158 km, first registration: 04/2017, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, Still EXV 14 C – a reliable electric high-lift pallet truck with an automatic transmission. Fgedpozw Rizjfx Al Ush Are you looking for a reliable and practical high-lift pallet truck that is ideally suited for daily use in a warehouse? The Still EXV 14 C combines a compact design, comfortable operation, and the proven quality of STILL – a compelling solution for efficient material handling in confined spaces. The vehicle was first registered in April 2017 and currently has 1,158 operating hours. This makes the EXV 14 C an interesting combination of proven service life and manageable operating hours. The automatic transmission enables comfortable and intuitive operation, allowing work processes to be carried out quickly and efficiently. Visually, the high-lift pallet truck presents itself in the typical orange STILL color and immediately conveys a professional impression. In daily warehouse operations, reliable technology, ease of use, and efficient processes are essential – and this is exactly where the STILL EXV 14 C demonstrates its strengths. Whether for internal material transport, storage, or daily work in the warehouse: this STILL EXV 14 C is an interesting opportunity for companies that want to make their logistics efficient and economical. Take advantage of this opportunity now and learn more about the STILL EXV 14 C – a reliable assistant for efficient warehouse processes. Sales only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sales excepted.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 511801E00296, Year of construction: 2014, operating hours: 6,474 h, load capacity: 1,400 kg, lifting height: 7,400 mm, free lift: 2,300 mm, load center: 600 mm, fuel type: electric, mast type: triplex, battery capacity: 775 Ah, battery voltage: 48 V, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 3,379 kg, Equipment: sideshift, Still FM-X14 Reach truck, year of manufacture 2014 with a Triplex mast & battery from 2022 Details: Still FM-X14 Year of manufacture: 2014 Work hours (h): 6474 Mast type: Triplex Lift height (mm): 7400 Freelift (mm): 2300 Build height (mm): 2920 Fgedezr Iqxjpfx Al Uoh Attachments: Sideshift Lift capacity (kg): 1400 Fork length (mm): 1150 Weight (kg): 3379 Additional hydraulic vehicle: AH1 Additional hydraulic mast: AH1 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2022 Battery capacity (Ah): 775 Battery voltage (V): 48 Accessories: Load guard. Sideshifter center position button. Comments: Full freelift.

Condition: excellent (used), BILWINCO 14-Head Multi-Head Weighing Machine – Stainless Steel BILWINCO 14-head multi-head weighing machine, designed for the automatic, precise, and continuous weighing of food products before dosing and packaging. The equipment uses a multi-head combination weighing system that automatically selects the most suitable combination of hoppers to achieve the target weight of each dose. Its 14-head configuration allows for efficient operation in industrial lines that require precision, repeatability, and continuous feeding. Primarily made of stainless steel, this BILWINCO weighing machine is designed for integration with packaging machines, filling machines, and other automatic dosing systems. MAIN FEATURES -Manufacturer: BILWINCO -Type: Multi-head weigher / combination weigher -Number of heads: 14 Fedpfxjzw D Htj Al Uegh -Automatic combination weighing system -Dosing controlled by weight -Multiple weighing hoppers -Automatic product distribution -Continuous industrial operation -Construction primarily in stainless steel -Hygienic design for the food industry -Compact configuration for in-line integration -Designed for automatic feeding of packaging machines -Integrable into existing weighing and packaging lines APPLICATION The BILWINCO 14-head multi-head weighing machine is designed to divide the product among different weighing hoppers and automatically calculate the combination that best approximates the programmed weight. Once the combination is selected, the corresponding hoppers discharge the product to form the required dose, which can be transferred directly to a packaging machine, filling machine, or other downstream equipment. This system allows for an automatic, fast, and repetitive weighing and dosing process, reducing manual intervention. It can be integrated with: Elevators and feeding systems Product conveyors Vertical packaging machines Pouch packaging machines Tray and container filling machines Dosing systems Weight controllers Metal detectors Packaging and end-of-line equipment APPLICATIONS Especially suitable for food industries, frozen food manufacturers, snack producers, vegetable processors, prepared food companies, and packaging companies that require automatic weight-based dosing. Depending on its configuration, it can be used for a wide variety of solid, granular, diced, or portionable products. The combination of BILWINCO technology and 14 weighing heads provides a particularly interesting solution for automatic lines that require precision and continuity in dosing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, functionality: fully functional, machine/vehicle number: 611801004475, Year of construction: 2009, operating hours: 16,314 h, load capacity: 1,400 kg, lifting height: 7,100 mm, free lift: 2,340 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, fork length: 1,150 mm, drive type: Elektro, Reach truck Chassis number: 611801004475 Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Fodpoyy D Urofx Al Uegh Mast type: Triplex Technical condition: normal Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 48V Battery capacity: 620Ah Battery year: 2018 Sideshift, 3rd valve,

Condition: new, maximum load weight: 1,010 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,300 mm, loading space width: 1,400 mm, loading space height: 300 mm, total length: 3,580 mm, total width: 1,535 mm, total height: 955 mm, Year of construction: 2026, Humbaur HU 13 23 14 Other models, sizes, and configurations are also available or can be ordered and configured individually according to your requirements. Fgodpfxjzv Hg Tj Al Ujh Please do not hesitate to contact us; we will be happy to provide you with personal advice! Description: One for almost everything. With the wide range of accessories available, you can equip the HU platform trailer for a variety of applications. It can transport your motorcycles, bicycles, garden tools, and more. To prevent the load from slipping, secure it with the lashing eyes recessed in the aluminum side walls. Technical data: Trailer type - single-axle * Construction type - aluminum * Weight - 290 kg * Gross vehicle weight - 1300 kg * Payload - 1,010 kg * Internal length - 2,300 mm * Overall length - 3,580 mm * Internal width - 1,400 mm * Overall width - 1,535 mm * Internal height - 300 mm * Overall height - 955 mm * Loading height - 655 mm * Tire size - 13 inches Standard equipment: V-shaped drawbar combined with longitudinal member, hot-dip galvanized * Chassis and frame, hot-dip galvanized * 13-pin connector, reversing light from 751 kg. gross vehicle weight upwards * Floor panel, 15 mm thick * Side panels made of anodized, double-walled aluminum profile with tension rod locks, completely removable * 4 lashing eyes in the outer frame profile * Support wheel * Humbaur multi-function lighting integrated in the underrun protection * Corner posts with insertion option