Used Flat Gearmotor for sale (4,476)

Condition: used, Year of construction: 1992, Internal item no.: 25086 Surface Grinding Machine Zirsch & Baltrusch Formmaster 6/30 + Magnetic clamping plate 600x300 mm Attention! The grinding spindle is noticeably louder and should probably be replaced in the near future. See video! Technical Data: Maximum grinding area: 650 x 300 mm Electromechanical cross feed: 300 mm Maximum table load: 300 kg Hedoxtn R Ispfx Agleh Table clamping surface: 650 x 250 mm Maximum distance from table surface to spindle center: 600 mm Grinding wheel dimensions: 400 x 40 mm Travel X: 840 mm / Y: 310 mm Automatic infeed in Z Connected load: 8 kW Installation dimensions (LxWxH): 3500 x 2000 x 2500 mm Weight: approx. 3000 kg

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1902038, grinding length: 1,000 mm, grinding width: 500 mm, total height: 400 mm, The machine is working perfectly, currently the system is not in operation. Hsdpfx Ajvyf H Rjglsh

Condition: excellent (used), Year of construction: 1987, Grinding length: 500 mm Grinding width: 250 mm Hodpfxsxwl A Aj Aglsh Max. workpiece weight: 250 kg Including magnetic chuck Including dressing device FROM DRESS Including complete operating manual

Year of construction: 2008, condition: good (used), For sale is a flat copper winding machine. This is a special-purpose machine designed for rectangular coils (approx. 85x50mm / 70x45mm) with a flat copper width of 6mm. Safety enclosure is present. The unit is fully operational. Inspection is possible. Additional welding and winding machines in stock. Hodpfxex E Nv Ee Agleh

Condition: excellent (used), Flat grinder LTF with magnet Hedpfjxw H S Sex Agljh

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 4,800 kg, ELB Perfekt 8 SPS, year of manufacture 1998, grinding area 800 x 400 mm, grinding wheel 300 x 50 mm, 4.3 kW spindle power, SPS control for automatic grinding cycle (roughing, finishing, sparking out, lifting), dresser mounted on spindle head with compensation. The machine is currently being overhauled by us: the grinding spindle is being newly fitted with bearings, the guideways are being hand-scraped. After the overhaul, the machine will meet the geometry of a new machine and is thus immediately ready for operation. Accessories: electro-permanent magnetic chuck 800 x 400 mm, water tank with automatic paper filter, partial enclosure. All functions are tested, and the machine can be demonstrated under power at our facility. We are also happy to handle installation and on-site training. Financing/leasing is no problem; we’d be happy to provide an offer! Hjdpsrpz Evefx Agljh

Condition: excellent (used), functionality: fully functional, Segment I – Unwinder with stabilizing table The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. Hodpfowck U Rox Agloh • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Condition: used, Year of construction: 2010, functionality: fully functional, 1 pc Surface Grinding Machine FS 640 SC with Fagor control Make: Geibel & Hotz Year of manufacture: 2010 Technical Data Working Area: Grinding area - Maximum grinding area 600 x 450 mm - Standard magnetic chuck size 600 x 400 mm - Clamping area (table to spindle center) 140 - 525 mm - Standard grinding wheel 300 x 50 x 76.2 mm - Table load incl. magnet 600 kg - Grinding spindle motor power approx. 3.7 kW - Total connected load approx. 11 kW - Table speed 2 to 28 m/min - Cross/vertical feed speed 100-1000 mm/min Required space 3.95 x 3.16 x 2.47 m Machine weight approx. 2.1 t Equipment Hodpfxox Dgvqj Agloh Machine-specific accessories, belt filter system, magnetic separator, extraction unit Magnetic chuck with adjustable holding force, automatic wheel dressing incl. compensation, Dressing diamond, balancing device, clamping device, 4 grinding wheels Technical data subject to change.

Condition: used, mileage: 462,506 km, power: 350 kW (475.87 HP), first registration: 09/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, BIG Space 2.5m – Wheelbase 3700mm – Standard fifth wheel, Jost JSK 42 – Automated transmission Mercedes PowerShift 3 – Gearbox with integrated GPS for reduced fuel consumption (PPC) – High-performance enhanced engine brake – Aquatarder – Top Torque – Torque increase in 12th gear – Electric auxiliary air conditioning – Automatic climate control – Luxury lower bunk – Cab hot water heater – Driver’s comfort air suspension seat – Electrically liftable roof – Active Brake Assist – Attention Assist – Halogen fog lights – Electronic Stability Program (ESP) – Lane keeping/anti-sway assistant – EPB braking system with ABS and ASR – Cruise control Hedjw E Rhpepfx Agleh

Condition: good (used), Year of construction: 1985, Maximum disc diameter: 230 mm Magnetic table size: 1000 x 300 mm Hodpfx Aolz Nh Ijgloh

Condition: refurbished (used), Durkopp adler 867-190122M Hodpfxjpbv Aye Aglsh 1 needle flat bed sewing machine with triple transport,thread trimmer, foot lifter, complete on table .

Condition: excellent (used), Year of construction: 2000, The machine is in very good condition 1500x600 Hjdpfjxl Ay Iex Aglsh

Condition: good (used), Year of construction: 2007, Kuehlmittelanlage 2.500l, Haftkraftregelung, halbautom. Wuchtsystem Hodpfedgk H Asx Agleh Schleiflaenge 3150 mm Schleifbreite 800 mm Werkstueckhoehe 650 mm Tischflaeche 3.150 x 600 mm Magnetspannplatte 3.000 x 600 mm Spindeldrehanzahl 1/min Schleifscheibenabmessung 450 x 100 x 127 mm Spindelleistung kW Gesamtleistungsbedarf 22 kW Maschinengewicht ca. t Raumbedarf ca. 11 x 3 x 2,4 m

Year of construction: 2013, condition: as good as new (ex-display), Technical description with the following main data: Load capacity 1000 kg static line load Useful stroke 895 mm Overall height 85 mm Total height 980 mm Platform length 1450 mm Platform width 1000 mm Material Smooth sheet metal Stroke time approx. 15 sec. for the full effective stroke Hjdpfx Agjfm U Auolsh Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Engine 1.1 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 in general, solenoid valve and switch IP 65 Unit placement free standing Operating box Dead man's control incl. 2 m cable Total weight approx. 205 kg Standard version: The lift tables comply with EN 1570 E and are marked with the CE mark. The steel parts are cleaned, primed with anti-rust paint and painted with two-component polyurethane varnish. The lift tables are equipped as standard with safety shut-off strips on all sides made of aluminium and with assembly supports for repair and service. Our lifting tables are dimensioned for approx. 10 strokes/hour with full load in 8 hours/day. For more intensive operation we offer special lifting tables. Warranty: 1 year on parts during normal operation in one shift, excluding labour costs.

Condition: like new (used), 4 pieces, Hodpfox Au Tuox Aglsh Type FL10-013, Width = 44 mm Length = 112 mm Groove width = 14 mm Thread = M12

Condition: used, Year of construction: 1976, operating hours: 123,456,789 h, functionality: fully functional, machine/vehicle number: SWBE 9 VA 2, grinding length: 900 mm, grinding width: 500 mm, feed length X-axis: 900 mm, table length: 900 mm, table width: 400 mm, spindle speed (min.): 3,000 rpm, grinding spindle speed: 3,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, The machine is still in use and everything is operational. However, it should be overhauled at some point. Pickup date is negotiable. Heavy machine bed👍 Automatic feed. Unfortunately, there is no operating hours counter. Hodpfxox Aknhj Aglsh

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 384, grinding wheel diameter: 250 mm, table length: 1,300 mm, table width: 500 mm, overall weight: 1,500 kg, jaw width: 160 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business closure. Placing a bid obligates you to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Hedpfxoxqf Uxe Agljh Table dimensions: 1,300 x 500 mm Magnet dimensions: 1,020 x 450 mm Grinding wheel diameter: 250 mm Jaw width: 160 mm MACHINE DETAILS Electrical Data Operating voltage: 380 V Control voltage: 220 V Rated current: 25 A Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 1,900 mm Weight: 1,500 kg EQUIPMENT 3 T-slots Magnetic chuck Various grinding wheels Vice Belt filter system

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 6471, grinding wheel diameter: 200 mm, overall weight: 1,000 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Magnet dimensions: 450 x 220 mm Grinding wheel diameter: 200 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 15 A Hedpfexqf E Rsx Aglsh Dimensions & weight Dimensions (L x W x H): 3,000 x 1,500 x 1,700 mm Weight: 1,000 kg EQUIPMENT DIAFORM dressing device

Condition: used, functionality: unexamined, For sale is an HK Orion (Hahn+Kolb) surface grinding machine. The machine is in age-appropriate condition, has not been tested, and is being sold as is. Our service promise: We prioritize quality, expertise, and customer satisfaction. Our team consists of qualified and experienced technicians specializing in Mazak machines as well as other machinery. We place great emphasis on personal support and are happy to assist you even after your purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG Hodpfxjxyyqyo Agljh All information is provided without guarantee.

Condition: used, machine/vehicle number: 007691, X axis working area: 2440 mm Y axis working area: 1220 mm Hedeu Rigyepfx Agljh Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Hedpfetwgirsx Aglsh Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Hodpfx Askw H Ekjgloh Total number of tool changer positions: 8

Condition: excellent (used), Year of construction: 1973, functionality: fully functional, input voltage: 380 V, Possible accessories can be negotiated on site. Hsdpfxexyqale Agleh

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: 5100, grinding wheel diameter: 250 mm, table length: 1,300 mm, table width: 300 mm, overall weight: 3,000 kg, No reserve price – guaranteed sale to the highest bidder! Hsdpfx Agsxnaq Noljh The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the specified period between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Grinding wheel diameter: 250 mm Table length: 1,300 mm Table width: 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,600 x 2,400 x 2,200 mm Total weight: 3,000 kg EQUIPMENT Lifting magnet (600 x 320 x 900 mm)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 350007, feed rate Y-axis: 2 m/min, table length: 1,200 mm, table load: 1,500 kg, table width: 800 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obliges you to arrange collection within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Table length: 1,200 mm Table width: 800 mm Table longitudinal travel: 1,300 mm Table load capacity: 1,500 kg Table feed rate: 3–25 m/min Y-axis Movements Adjustable feed speed: up to 2,000 mm/min Adjustable depth of cut: 0.001–0.030 mm Fine adjustment: 0.001 mm via electronic handwheel Z-axis Adjustable cross feed: up to 2,000 mm/min Maximum cross travel: 800 mm Fine adjustment: 0.001 mm via electronic handwheel Magnet dimensions: 1,200 x 750 mm MACHINE DETAILS Operating voltage: 400 V Hjdpfx Agjxm R Dkolsh Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 7,000 x 2,400 x 2,600 mm Weight: 14,000 kg EQUIPMENT Linear guides on Y-axis Electronic handwheel for fine adjustment Hydraulic external table drive Grinding wheels