Used Gkt 60 for sale (21,721)

Condition: used, Year of construction: 2019, Motan Luxor EM A 60 Dry Air Generator / Drying System (2019) designed for efficient plastic granule drying. This unit delivers a precise dry air flow to maintain optimal dew points and process stability in plastics processing (injection molding / extrusion). Technical Specifications : Operating Voltage : 400 V / 50–60 Hz (3PE) Control Voltage: 24 V DC Nominal Current : 11 A Backup Fuse : 16 A Short-circuit Current : 6 kA Iijdpfoz Rt Ilox Ap Deh Max. Weight: 195 kg Drying Bin Capacity: 60 L Process Air Flow Rate: approx. 20–25 Temperature Range: 70–140 °C

Condition: used, Filter housing of stainless steel for plates 600 x 600, with manual hydraulic. Size for 80 plates. 78 plates on stock. Plates maximum: 80 Iiodsz R Dk Djpfx Ap Djh Plate formats: 600x600 Platefilter features: Manual spindl

Condition: good (used), Year of construction: 2015, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Iisdpsz A T E Hsfx Ap Djh Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or any errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: excellent (used), Year of construction: 2003, Arburg 270S 250-60 U / Universal Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 18 mm Shot Weight: 17 g Injection Pressure: 2500 bar Dosing Volume: 20 ccm Clamping Unit: Clamping Force: 25 t Ijdpfx Aoz Iqruop Doih Tie Bar Spacing: 270x270 mm Platen Size: 400x400 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Universal machine - Injection unit can operate both vertically and horizontally Euromap 12 Robot interface Air valve x 4 Hydraulic core pull x 1 Control system with hot runner system x 8 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario, allows the injection unit to be used, for example, for side injection Automatically opening cover Dimensions: Weight: 1900 kg Length/Width/Height: 2.89x1.11x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 320S 500-60 Year of manufacture: 2003 Injection Unit: Iiedpfsz Iqyxsx Ap Djh Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 ccm Clamping Unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA Additional Equipment: Euromap 12 Robot interface Air valve x 1 Controller with 6 hot runner zones Hardened injection unit - bimetallic Dimensions: Weight: 2,350 kg Length/Width/Height: 3.32x1.24x1.81 m Drive: Pump/Motor: 11 kW Heating capacity: 4 kW Total power: 15 kW All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2020, Diesinking / EDM Travel distance X: 600 mm Travel distance Y :420 mm Travel distance Z: 370 mm table size X: 750 mm table size Y: 550 mm max. workpiece size X: 950 mm max. workpiece size Y: 740 mm max. workpiece size Z: 450 mm max. electrode weight: 50 kg max. workpiece weight: 1500 kg electrode changer: 32 - time C-axis Iijdozg T Ewopfx Ap Djh generator: 40 Ampere working hours approx: 160 h cooler drop tank Linear motor 32-position Electrode Changer

Condition: used, machine/vehicle number: 008739, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Iodpfoz N Swiex Ap Doih Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 14

Condition: used, Year of construction: 2020, operating hours: 583 h, functionality: fully functional, working width: 650 mm, area performance: 3,900 m²/h, overall weight: 292 kg, tank capacity: 60 l, water tank capacity: 60 l, The Kärcher B60 BP Dose W R65 is a 2020 model and has 583 operating hours. Ijdoz Nfwijpfx Ap Dsih It has been completely disassembled by us, and each component has been checked for functionality and cleaned. The roller brush deck has been fitted with new bearings and new brushes. The suction foot is equipped with new, oil-resistant rubber lips. Four new, maintenance-free batteries are included in the scope of delivery. These can be conveniently charged using the integrated charger. The roller brush deck is ideal for applications where coarse dirt particles (such as wood splinters) are present. The roller brushes "sweep" the coarse dirt particles into a separate container for coarse dirt, which is positioned directly behind the roller brushes. This prevents any particles from adhering to the suction foot, which could impair the suction performance. For efficient use of cleaning agents, the Kärcher B60 BP Dose has a chemical dosing system. Technical data: Working width: 650 mm Tank volume fresh/dirty water: 60 liters Theoretical area performance: 3900 m²/h Operating weight: 292 kg

Condition: good (used), Year of construction: 2008, Used 6000 x 2000 mm plasma cutting machine from HPM (Italy) Type: GV 60 20 Table dimensions: 6000 x 2000 mm Hypertherm 130 XD with Truehole option New Hypertherm EdgeConnect CNC control + new servo motors Modesta extraction system Includes spare parts Iiodozd Ur Topfx Ap Dsh Year of manufacture: 2008 CNC control renewed in: 2018

Condition: used, Year of construction: 2007, Labotek dryair dryer DDM 4/60 60 Liter + Loader + 2 comp- valve Iiodpfx Apjz Hx Axs Deh year 2007 price: 3.950 € Contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain MillPlus IT Travel ranges X/Y/Z: 730 x 510 x 510 mm Spindle speed: 12,000 rpm Tool magazine for 60 tools, SK 40 NC rotary table integrated into a fixed table, diameter 600 mm / 1000 mm x 600 mm Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Swiveling range -120/+30° 3D quick SET Iisdpfxjz Dk I Uj Ap Djh Production package 40 bar/23 l/min (theoretical pump output), tank 600 l Paper band filter Rotating viewing window Chip conveyor

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 9,871 h, load capacity: 5,000 kg, lifting height: 6,040 mm, free lift: 870 mm, fuel type: electric, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,760 mm, fork length: 1,620 mm, empty load weight: 10,694 kg, total length: 4,200 mm, drive type: Elektro, construction width: 2,770 mm, Four-way side loader Load center: 800 Iijdpfx Aoz Evtfep Dsh Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Front tire size: 660/250-480 Rear tire type: Solid tires Rear tire size: 413/178-285.8 Battery voltage: 80V Battery capacity: 775Ah Battery year of manufacture: 2017 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-purchase and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this 50/18/60 STC8.5. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts starting from 8 tons. We would also be happy to offer your vehicle for consignment sale at our facility. Fork positioner, Platform height: 530 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, load capacity: 6,000 kg, fuel type: diesel, motor manufacturer: Perkins, overall weight: 9,400 kg, Equipment: cabin, - Water-cooled-engine and starts well - manually operated directional control valves for up, down, balance and extend the fork and retract it - brakes work Isdpfozzw Rajx Ap Deih

Condition: used, Year of construction: 2023, Compaction width: 600 mm Iiedpfxez Sw Tzs Ap Deh

Condition: used, machine/vehicle number: 516305X00392, Year of construction: 2020, operating hours: 9,411 h, load capacity: 3,000 kg, lifting height: 4,150 mm, mast type: duplex, fork length: 2,400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Ijdpfx Aez Nv A Aop Dsih Load capacity: 3,000 kg Lifting height: 4,150 mm Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex mast Free-lift mast: Without center hydraulic cylinder Drive type: Electric Battery voltage: 80 V Battery capacity: 620 Ah Battery voltage in idle state: 87.5 V Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Dead weight: 5,100 kg Service valid until: 04/2027 UVV certificate valid until: 04/2027 Operating hours: 9,411 h EQUIPMENT Fork positioner with side shifter Semi-cab with windshield wiper Lateral fall protection, detachable LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Previously a Still full-service unit 3rd and 4th valve Fork adjustment: Hydraulically adjustable Side shifter All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible for a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receiving confirmation of payment by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 122

Condition: excellent (used), Year of construction: 2002, Machining Centre - Universal Deckel Maho DMU 60 T Year of manufacture: 2002 Number of axes: 5 (3+2) Technical specifications: Travel paths: X-axis: 630 mm Y-axis: 560 mm Z-axis: 560 mm Magazine positions: 24 SK 40 NC rotary table integrated into fixed table. Clamping surface: 600 x 1000 mm Diameter: 600 mm Table weight: 800 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 T-slot distance: 63 mm Iisdpexqfw Tofx Ap Doh Max. table load: 350 kg Rotatable C: 360° 5 axes - Controlled NC swivel milling head (B axis) - Rotary table integrated into fixed table (C axis)

Condition: as good as new (ex-display), functionality: fully functional, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 300 mm, total length: 6,689 mm, total width: 1,766 mm, total height: 3,055 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Further technical data Vertical cutting height: 2,150 mm / 2,150 mm (with lowering function) Horizontal cutting height: 2,100 mm Width: 1,766 mm (free-standing) / 1,383 mm (wall-mounted) Cutting length: 5,300 mm / 3,000 mm / 5,000 mm (with lowering function) Iiodoxazapspfx Ap Dsh Saw frame Self-supporting, torsion-resistant, welded frame with latticework reinforcement on 4 solid machine feet Automatically deflecting timber support wall TRK1 with integrated small parts timber shelf Panel lowering device (PAV) with 2 panel lowering units for board materials up to max. 160 kg (80 kg per unit) Length stop profile above central support up to zero cut position Continuous length stop profile above roller support with flip stop Precise 17-fold roller support, pneumatically braked Swivelling central support along the entire length, support grid made of aluminum with plastic pads Unit for wall mounting Aluminum small parts support (1 pair), can be used individually Saw beam & saw unit Stable, durable saw beam with double locking Robustly mounted motor carriage for high cutting precision Pneumatic clamping of the motor carriage Powerful, high-torque saw motor 5.5 kW (7.5 HP) Integrated, high-performance TRK dust extraction system for external extraction unit Supersilent sound insulation Electromagnetic motor brake Paper holder Control Clear push-button control for easy operation Positioning of the panel lowering device via two-hand control User guidance via status LED indicators on panel lowering units Operating hours counter Dimension adjustment Programmable cam switch for recurring dimensions Laser-guided display of horizontal cuts Digital measurement system DMS-Y, including motorized fine adjustment Digital measurement system DMS-X, including manual fine adjustment, installation selectable above central or roller support Optional equipment 006 Striebig free-standing base support 103 Digital measurement system DMS, X-axis 104 Digital measurement system DMS, Y-axis 105 Additional digital measurement system DMS, X-axis 200 Pro Lock Easy-Fix tool clamping system at the saw blade 201 Scoring saw unit VSA 300 Additional panel lowering unit 401 Complete aluminum small parts support Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Year of construction: 2010, condition: used, Field of application: Construction General condition: poor Iiodpfoz N Rwhsx Ap Dsh Technical condition: poor Visual appearance: poor Serial number: VDO9020 Please contact Christopher Oldenburg for more information

Condition: used, Year of construction: 2008, Edge banding machine Manufacturer: IMA Type: Advantage 60 Year of manufacture: 2008 Technical specifications: - Joint milling unit - Air nozzle for removing loose particles - Workpiece preheating - Gluing unit - Cut-off saw unit - Multifunction milling unit for milling and edge rounding - Profile trimming blades - Cleaning agent spray system (Riepe) - Surface trimming blades - Brushing unit - Groove milling unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Iisdpfxsz Skdhs Ap Deh

Condition: used, functionality: fully functional, Original PROBAT 60 industrial roaster, manufactured in 1970, equipped with a wood-fired heating system. A robust, heavy-duty machine, renowned for its high durability and excellent roasting quality. Includes: - Cooler - Cyclone - Exhaust system The machine is currently disassembled and ready for transport. Isdpfx Apozcl U Dj Deih

Condition: used, including 36 plastic plates and 2 end plates of stainless steel Iijdpjz N Eprsfx Ap Doh dimension ca. 260x90x160 cm Distance between first plate and spindle approx ca. 120cm

Condition: used, Year of construction: 2011, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A 63 swivellable NC: ° table surface area 1.000 x 600 mm table diameter Ø 600 mm T-slots 1x 14 x H7, 8x 14 H12 max. table load 500 kg rotatable C: 360 ° number of toolpositions 2x12 (24) pos. Iodsyz Dcfepfx Ap Deih tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm total power requirement 45 kVA weight of the machine ca. 6,8 t dimensions of the machine ca. 4,5 x 4,5 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - Swivel-Millinghead - Package for tropical climate

Condition: used, Year of construction: 2001, grinding length 600 mm Iijdjzi Ey Sspfx Ap Deh grinding width 400 mm workpiece height 350 mm table-size 820 x 350 mm dist. center of grinding spindle - table 140-525 mm table movement 660 mm workpiece weight max. 400 kg diameter / bore of grinding wheel 350 x 50 x 76,2 mm table speeds 2-28 m/min power capacity - grinding motor 3,7 kW total power requirement 8 kW weight of the machine ca. 2100 kg dimensions of the machine ca. 4,5 x 3 x 2,4 m Geipel & Hotz FS 60 AC surface grinder, built in 2001, in good condition

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 400 mm workpiece height 375 mm table adjustment - longitudinal max. 660 mm table cross movement max. 410 mm distance spindle center to table max. 525 mm table speeds 2 - 28 m/min table load max. 400 kg cross feed of table intermittent 3 - 40 mm rapid traverse cross 1 m/min grinding wheel size max. 300 x 50 x 76,2 mm total power requirement 8 kW weight of the machine ca. 2,1 t dimensions of machine L x W x H 2,75 x 1,7 x 2,42 m Accessories: magnetic plate 600 x 400 mm, grinding wheel with flange, 1 flange separate, DRO on Y-axis (vertical), wheel trueing Ijdpjz D Itnofx Ap Djih attachment, balancing scale, wet grinding attachment

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Max. Torque: 121 / 82 Nm Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Ijdpfxeycpxgo Ap Dsih Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement