Used Hfs 6 for sale (51,649)

Condition: used, Hi we can offer KBA 142-6-LV year 1994 Ihodpswqz Drefx Ahyet Varnishing tower after 5th units, Baldwin cooling device Blanket Weko T 77 Spray powder Non-stop feed and delivery Plate bender IR and hot air dryer in delivery CX device for cardboard without compressor Semi-automatic plate change Delta system on Varidamp

Condition: ready for operation (used), functionality: fully functional, Auction of a fully demountable, multifunctional commercial hall! TECHNICAL DETAILS Dimensions Hall 1 Width: 22 m Length: 70 m Height: 6 m Ihjdpfsx T Dgzex Ahyjt Dimensions Hall 2 Width: 23 m Length: 20 m Height: 6 m Roof insulation: EPS approx. 100 mm EQUIPMENT 3 doors & gates Wall: interior boxes filled with insulation sacks, cladding with steel trapezoidal profile sheets Roof: steeldeck trapezoidal profile sheeting Secondary steel structure: steel frames and columns Purlins Wind bracing for stiffness

Condition: good (used), machine/vehicle number: 224194-0451, Euroturn (ZPS Mori-Say) 6-32 rebuilt multi-spindle screw machine Ihsdpjtic Hqjfx Ahyjt SN: 224194-0451 6 Spindles 32mm Capacity Voltage: 480v With Spindle Stopping Siemens Control System Pickoff and Back Finish Stock Reel Cover and Stand Sedimentation Tank Upgrade: Servo Feed Drive in place of main spindle drive Upgrade: Repair Drum Path Quality Inspection Report Machine Install 1-Year Warranty Turnkey Available Call for more information

Condition: good (used), Year of construction: 2003, NAGEL MODEL TBT M320-6 6 SPINDLE CNC HORIZONTAL GUN DRILL, 2003 Equipped with: Panel Mate Power Pro Control Counter Rotation Cross Drilling High Pressure Coolant System Auto Loader Magnetic Chip Separator Hydraulic System Chiller Isdjrtrztjpfx Ahysht Specifications: Maximum Drill Depth (Approx): 16" Maximum Drill Length: 36" Number of Drill Spindles: 6 Spindle Motors (3): 7.5HP HP Per Spindle: 3.75 Drill Head Slide Stroke: 16.9" Maximum Diameter Mild Steel: 0.750"

Condition: used, Used Zetterstrom 912 litre capacity 316L stainless steel vertical reactor. Unit has welded dished top and bottom heads. Internal rated 6 bar design pressure at -35 to 180 deg.c. External stainless steel jacket rated 6 bar/full vacuum design pressure at 180 deg.c. Unit has top entry 3-tier stainless steel agitator direct diven by 3kW 220/380 volt 3/50 1440 rpm motor via Lightnin model LS400 gearbox. Also includes (3) baffles. Unit is mounted on side supports. Isdpfjx Ticnsx Ahyjht Specifications: Capacity: 241 gal Type of stainless: 316L Internal Pressure: 6 PSI Internal Temperature: 180°F Jacket Pressure: 87 PSI Type Of Heads: Welded Dished Top and Bottom Legs/Lugs: Side Supports

Condition: used, Year of construction: 2019, operating hours: 8,100 h, Serial number: HCMDDN5XE0002xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22126 Specifications: Model year: 2019 Hours: 8,100 Weight: 31,700 kg Power: 197 kW Undercarriage (see photos) New bottom rollers, according to owner Digging bucket included Rear-view camera Side camera Central lubrication system Narrow bucket not included Gjerstad quick coupler Climate control / AC Additional work lights Video available Description:Hitachi Zaxis 300 from 2019.The machine is sold with digging bucket only; narrow bucket is not included.Services have been carried out both by the owner and at a workshop.Ready for delivery. Hours: 8100 Own weight: 31700 Kw: 197 Model: ZX300LC-6 Beltegraver m/ Graveskuffe. Ihsdpfxsx Ty R Nj Ahyst

Condition: used, mileage: 255,000 km, Year of construction: 2014, Field of application: Freight transport Serial number: WDB9066331S98xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21295 Ihsdoxb N Hyjpfx Ahyst Specifications: Km: 255,000 Transmission: Automatic Tires (see pictures) Euro 6 12 seats Wheelchair ramp 163 hp Rearview camera 2 sets of wheels with tires Radio/CD Climate control/AC Service performed at local workshop Ready for delivery Notes: ABS light is on, owner suspects NOX sensor. Description:Mercedes Sprinter 316 Minibus with 12 seats.The bus is from 2014 and EU-approved.Euro 6 engine with 163 horsepower. Km: 255000 HK: 163 Technical approved: Yes EU-approved until: 18.06.2026 Own weight: 2640 Total Weight: 3500 Payload: 785 Width: 199,3 Length: 608,6 Euro: 6 Model: Sprinter 316 Gearbox: Automatic Number of seats: 12

Condition: used, Year of construction: 2018, operating hours: 6,945 h, CE mark: yes Serial number: hcmjak40l0006xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20541 Specifications: - 2018 model - 6945 hours - 270 kW - 52700 kg - Machine width: 352 cm - Track width: 60 cm - Toothed bucket - ​​Central lubrication - 2 cam belts - Extra hydraulics - S90 attachment - Undercarriage (see pictures) - Full track controls - Service history - Air conditioning/ac - Radio - Lights - Ready for delivery Description: We have a 2018 zx530LCH-6 excavator w/ excavator bucket for sale. Isdpfx Aewph Rcshyjht All services have been performed by Nasta. The machine works as it should according to the owner. The machine moves a few m3 during the day and is efficient in its work. The machine is ready for delivery. Hours: 6945 Own weight: 52700 Total Weight: 52700 Width: 352 Kw: 270 CE: Yes Model: zx530LCH-6 gravemaskin m/ graveskuffe. SE VIDEO

Condition: used, Year of construction: 2019, operating hours: 4,026 h, CE mark: yes Serial number: HXMDBS5XT0060xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22130 Specifications: 2019 model Hours: approx. 4,026 Power: 128.4 kW Weight: 20,800 kg Undercarriage (see photos) Digging bucket Grading bucket Engcon tilt S70 quick coupler Central lubrication Webasto heater Seat covers Rear-view camera Scratch at the rear (see photos) LED light bar Roof-mounted rotating beacon bar Radio/CD Climate control / AC Description: Hitachi ZX190LC crawler excavator sold with digging bucket, grading bucket and Engcon tilt.A Gjerstad demolition grapple can be included at an additional cost.There is a scratch at the rear and a minor mark on the cab. No technical issues – the machine has been on a service agreement and regularly maintained.Available for delivery on short notice. Hours: 4026 Iedpjx Ty Rvsfx Ahyeht Own weight: 20800 Kw: 128.4 CE: Yes Model: 2019 Hitachi ZX190LC-6 Beltegraver m/ tilt og 2 skuffer

Condition: used, Year of construction: 2019, operating hours: 11,775 h, Serial number: bannhj40c97j2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20021 Specifications: - 2019 model - 11775 Hours - 290 kW - 40300 kg - 3-function - Service history - Machine width with bucket: 340 cm - Tires (see pictures) - Lever steering - Central lubrication - Scale (unknown condition) - Printer (unknown condition) Isdpswpiarofx Ahyeht - Bucket - ​​Articulated steering - 4x4 - Ready to deliver   Description: We have a 2019 Hitachi zw370-6 wheel loader w /scale, printer and bucket for sale. All services have been performed by Nasta. Regarding the scale and printer, this is in unknown condition. Some cosmetic damage may be found. Ready to deliver. Hours: 11775 Own weight: 40300 Total Weight: 40300 Width: 340 Kw: 290 Model: zw370-6 Hjullaster m/ vekt, skriver og skuffe

Condition: used, Year of construction: 2007, operating hours: 3,608 h, Drive: Track Serial number: XN7DC1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18436 Iodpfxevgzqre Ahysht Specifications: - 2007 model - 3608 hours - 17042 Kg - 116 kW - Width of Doser 301 cm - Width of doses with shear approx. 380 cm - Belt width: 86 cm - Tilt cylinders - 6 Way Function on grader blade - Good undercarriage (see pictures) - New undercarriage (g tt approx. 300 hours) - Lever steering - Service history - Ready for delivery Description: New Holland Doser with new undercarriage and 6-way function. The undercarriage has run about 300 hours since it was replaced. 2 injectors have been changed. It comes with spare parts when sold. Some repair cost to be expected Ready for delivery Hours: 3608 Own weight: 17042 Total Weight: 17042 Kw: 116 Model: 2007 New Holland D150B Doser m/ nytt understell og 6 veis funksjon på skjær

Condition: used, Year of construction: 2021, Serial number: hcmdeq50j0009xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20012 Specifications: 2021 model 1100 hours (doesn't matter) 42.2 kW 8730 kg Machine width: 232 cm Additional hydraulics Central lubrication Track steering Engcon proportional tiltrotator Undercarriage in good condition Multi-X coupling on hydraulics Ijdpfxsv U S Tyo Ahyoht Webasto Taillight rig on the solder Sanding tray Tiltrotator with clamp Air conditioning Radio Toolbox Ready for delivery Description:We have a 2021 Hitachi ZX85US-6 tiltrotator excavator with grapple and sanding bucket for sale.According to the owner, According to the owner, it was taken out 6 months ago in 2022. According to the owner, everything works as it should. The machine has few hours.Service is carried out by the owner.The machine is ready for delivery. Own weight: 8730 Model: zx85us-6 gravemaskin m/ rototilt med klype og pusseskuffe

Condition: used, Year of construction: 2018, operating hours: 14,270 h, Serial number: bannhj40c97j2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20022 Specifications: - 2018 model - 14270 Hours - 290 kW - 40300 kg - 3-function - Service history - Machine width with bucket: 340 cm - Tires (see pictures) - Lever steering - Central lubrication - Scale (unknown condition) - Printer (unknown condition) - Bucket - ​​Articulated steering - 4x4 - Service history - Air conditioning/ac - Lights - Radio - Ready for delivery Ijdpfowpicyex Ahyeht Description: We have a 2018 Hitachi zw370-6 wheel loader w /scale, printer and bucket for sale. All services have been performed by Nasta. Regarding the scale and printer, this is in unknown condition. The alternator and belt need to be replaced on the loader. Some cosmetic damage may be found. Ready for delivery Hours: 14270 Own weight: 40300 Total Weight: 40300 Width: 340 Kw: 290 Model: zw370-6 hjullaster m / vekt, skriver og skuffe

Condition: used, Year of construction: 2022, operating hours: 1,304 h, Serial number: HCMDEQ50E0009xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20257 Specifications: - 2022 model - Certified to: 02/26 Ijdpfx Ahowi R I Doyeht - 1304 hours (will increase slightly) - 8770 kg - 42.4 kW - Machine width: 229 cm - Blade - Extra hydraulics - Central lubrication - Undercarriage (see pictures) - Service agreement - Rototilt - Cleaning bucket - ​​Excavating bucket - ​​Narrow bucket - ​​Roadliners - MIG 2 levers - S50 attachment - Extra lights - Air conditioning/ac - Radio - Ready for delivery Description: We have a 2022 Hitachi zx85us-6 excavator w/ rototilt, cleaning bucket, digging bucket, narrow bucket for sale. The machine is well maintained and in good condition. It is on service agreement as of today. Ready for delivery. Hours: 1304 Total Weight: 8770 Year controlled: Yes Year controlled until: 02/26 Width: 229 Kw: 42.4

Condition: used, machine/vehicle number: JT121JK280000xxxx, mileage: 378,000 km, Year of construction: 2003, Please contact ATS Norway for more information Please provide reference number upon request: 21962 Specifications: - Not EU approved - Km: 378,000 - Transmission: Manual - 4WD - Trailer hitch Iodex Uv U Hjpfx Ahyeht - Tires (see pictures) - 6 seats - 102 hp - Climate/AC - Ready for delivery Description: Toyota Hiace from 2003. Owner says the car has a lot of rust. Ready for delivery. Km: 378000 HK: 102 Technical approved: no EU-approved until: 23.05.2025 Own weight: 1970 Total Weight: 3000 Payload: 955 Width: 180 Length: 516 Model: HIACE Gearbox: Manual Number of seats: 6

Condition: used, Year of construction: 2016, operating hours: 11,000 h, Serial number: HCMDDN50J0006xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19936 Ihjdsv U R U Ajpfx Ahyjt Specifications: Certified until: October 2025 Model year: 2016 Operating hours: Approximately 12,100 hours Power: 197 kW Weight: 31,600 kg Chassis: See pictures New chains Leica GPS Engcon Tiltrotator S70 quick release Sanding bucket Excavator bucket Webasto Central lubrication Additional work light Rotor beam LED bar Rear camera Radio/CD Air conditioning/AC Description: Hitachi ZX300 crawler excavator from 2016. This excavator is equipped with Leica GPS, two buckets, and Engcon tilt, as well as new chains. It is certified and ready for immediate operation. The machine can be delivered at short notice. Hours: 11000 Own weight: 31600 Total Weight: 31600 Kw: 197 Model: ZX300LC-6 Beltegraver m/ 2 skuffer, tilt og GPS

Condition: used, Year of construction: 2019, operating hours: 5,630 h, Serial number: HCMDBS5XC006001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20196 Specifications: Certified to Model year: 2019 Hours: Approximately 5,630 Power: 128 kW Net weight: 20,800 kg Belt width: Approx. 60 cm Machine width: Approx. 275 cm Undercarriage: See pictures Quick release: Gjerstad S70 Buckets: Sanding bucket and digging bucket Rotor tilt Leica GPS system Central grease Ihjdpswdu D Eefx Ahyst Hammer hydraulics Rear view camera Additional work light Radio/CD Air conditioning / AC Description:Hitachi ZX190LC crawler excavator from 2019 with approximately 5,630 hours.The machine is delivered with both a sanding bucket and a digging bucket , a tiltrotator , and Leica GPS .The machine is equipped with central grease, hammer hydraulics and a reversing camera.Ready for delivery at short notice. Hours: 5630 Own weight: 20800 Total Weight: 20800 Width: 275 Kw: 128 Model: ZX190 LC-6

Condition: used, machine/vehicle number: WSM0000000520xxxx, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 20696 Specifications: 2018 model 33 podium finishes Partition 2 temperature zones Recent major service on the generator Mileage: 295,000 Best tt test for new FRC approval: 06.06.2025 Description:Thermo trailer with booms and 2 temperature zones.New FRC approval.Ready for delivery. Technical approved: Yes Ijdpowqwkhefx Ahysht EU-approved until: 22.04.2026 Own weight: 9402 Total Weight: 42000 Payload: 32598 Width: 260 Length: 1404 Model: thermotralle m/ Ny FRC godkjenning til 6/2028 , bommer, 2 temp soner & ny service

Condition: used, machine/vehicle number: YS2R6X4000209xxxx, mileage: 567,000 km, Year of construction: 2014, Please contact ATS Norway for more information Please provide reference number upon request: 19391 Specifications: Ijdpfxsvg Am Ie Ahyeht EU approved until 20.03.2026 Mileage: approx. 540,000 km Transmission: Automatic Suspension: Steel suspension Euro 6 Good tires 6x4 Trailer coupling VBG 581 hp Tool box Rotating beacon bar Bed Radio/CD Climate control / AC Ready for delivery Description:Scania R580 tipper truck.The vehicle is a 2014 model with a Euro 6 engine.Delivery by agreement. Km: 567000 HK: 580 Technical approved: Yes EU-approved until: 20.03.2026 Own weight: 13840 Total Weight: 30000 Payload: 16085 Width: 255 Length: 735 Euro: 6 Model: R580 6x4 Tippbil. Eu-godkjent. Euro 6 Gearbox: Automatic

Condition: used, Year of construction: 2018, operating hours: 2,330 h, Serial number: PS03-0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21888 Specifications: Model year: 2018 Hours: 2330 Weight: 5100 kg 29.5 kW Undercarriage (see photos) Central lubrication Track width: 40 cm Blade Total width: approx. 200 cm S40 quick coupler Rototilt SE digging bucket from 2020, 200 litres SB grading bucket Narrow bucket Ihjdpfx Aexy Ev Uohyot Service done by owner Climate control/AC Video Ready for delivery Description:Kobelco SK55 from 2018.The machine has only 2330 hours.Sold with Rototilt and 3 buckets.Grapple not included. Hours: 2330 Own weight: 5100 Width: 200 Kw: 29,5 Model: SK55SRX-6 m/ Rototilt og 3 skuffer. 2330 timer! SE VIDEO

Condition: used, Year of construction: 1978, Please contact ATS Norway for more information Please provide reference number upon request: 21750 Specifications: 1978 model Not EU approved Ihsdpfxoxvk Uuj Ahyjt 6 axles Length of plane: 8.40 m Width: 3 m Tires (see pictures) L ft on 1 and 2 axles Forced steering on 5th and 6th axles Air in the water Ready for delivery   Description: 1978 DAMM 6-SD-355 6 axle machine trailer. The trailer is not EU approved. Ready for delivery. Technical approved: no Own weight: 2850 Model: 6-SD-355 6 akslet maskintralle

Condition: excellent (used), functionality: fully functional, mileage: 493,923 km, power: 315 kW (428.28 HP), first registration: 05/2020, fuel type: diesel, empty load weight: 12,160 kg, maximum load weight: 13,840 kg, overall weight: 26,000 kg, axle configuration: 4x2, next inspection (TÜV): 05/2026, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2020, number of beds: 2, Equipment: air conditioning, navigation system, Volvo FM 420/Carrier Iceland Twincool/Drawbar/ACC/Euro 6D • Manufacturer: Volvo • Model: FM 420 • Mileage: 493,923 km • First registration: 05.2020 • Power: 315 kW/428 hp • Wheelbase: • Axle configuration: 6x2 • Engine brake • Emissions standard: Euro 6D • 3rd axle: lift-steer axle • Carrier Iceland Twincool Isdsx Ei E Hopfx Ahyjht • 3-chamber system • Electric roller shutters • Box section 1: L: 3.80 m x W: 2.50 m x H: 1.95 m • Box section 2: L: 3.78 m x W: 2.50 m x H: 2.16 m • Through-loading system • Reversing camera • Lane keeping assistant • Adaptive cruise control • Power supply connection • Navigation system • Roof hatch • Transmission: Automatic • Suspension: Air suspension (front and rear) • Main inspection (TÜV) valid until: 05.2026 • Curb weight: 12,160 kg • Payload: 13,840 kg • Gross vehicle weight: 26,000 kg _____ Trailer • Manufacturer: Schmitz Cargobull • Model: SCB*2 • Mileage: 480,265 km • First registration: 05.2020 • Suspension: Leaf/leaf • Landing legs front and rear • Electric roller shutters • Carrier ICELAND 8 • Power supply connection • Box length: 7.63 m • Box width: 2.50 m • Box height: 2.16 m • Curb weight: 6,280 kg • Payload: 11,720 kg • Gross vehicle weight: 18,000 kg • Main inspection (TÜV) valid until: 05.2026 • German vehicle • German documents • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to prior sale, - Errors and/or typos excepted. - Sale according to our terms and conditions.

Condition: excellent (used), functionality: fully functional, mileage: 391,018 km, power: 285 kW (387.49 HP), first registration: 08/2019, empty load weight: 6,822 kg, overall weight: 18,000 kg, axle configuration: 4x2, brakes: intarder, driver cabin: sleeper cab, Year of construction: 2019, Equipment: fridge, lane keeping assist, navigation system, parking heater, _____ Volvo FM 380/Tractor unit/Steel-Air suspension/Euro 6/Intarder • Manufacturer: Volvo • Model: FM 380 • Mileage: 391,018 km • First registration: 08/2019 • Power: 285 kW / 388 HP • Transmission: Automatic • Axle configuration: 4x2 • Suspension: Steel-Air • Intarder • Reversing camera • Air conditioning • Navigation system • Long-distance cab • Lane keeping assist • Roof hatch • Auxiliary heating • Cooler box • Unladen weight: 6,822 kg • Payload: 11,178 kg • Gross vehicle weight: 18,000 kg • Euro 6 • MOT valid until August 2026 • German vehicle • German documents • Immediately ready for operation • This offer is non-binding and subject to prior sale. - Subject to intermediate sale, - Errors and/or typographical mistakes excepted. Isdpfx Asyaqiuehysht - Sale according to our general terms and conditions.

Condition: used, Flexible milling cell with 6-axis industrial robot ABB - CARAT type IRC5 / IRB 2400 M2004 Robotic milling system with rotary shuttle table featuring 2 workstations, robot cell Serial No. 24-51541 Year of manufacture: 2006 6-axis industrial robot ABB Type IRB 2400/16 M2000 Control system: ABB Type IRC5 with tech-in panel HF milling spindle PERSKE Type KRS 35.3-2, power 1.2 kW, rotational speed 17,400 to 23,200 rpm Robot handling capacity: 16 kg Robot net weight: 380 kg Power supply: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck - The complete plant is configured as a compact milling cell with shuttle table. - Control cabinet and robot control unit compactly and solidly installed on the milling cell - Servo-driven rotary table, rotation angle 180°, with partition and two clamping surfaces for fixtures - One side of the rotary table can be loaded with new workpieces in parallel to the milling cycle Iodpeyaq Nusfx Ahyoht Milling cell weight: approx. 4000 kg Very good condition The milling cell was used as a machining center for milling operations on aluminum sheets and ALU deep-drawn parts. Edge processing, milling of cutouts, drilling, etc. Also suitable for machining plastics or similar materials. If interested, please request a video from us.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 22,000 h, overall weight: 12,000 kg, total height: 2,200 mm, punching force: 31 t, number of axes: 3, This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Max material thickness: approx. 6 mm (mild steel) • Sheet working range: approx. 2500 mm x 1250 mm (without repositioning) • Positioning accuracy: ±0. 1 mm Iodpfxsyaqnqe Ahyoht • Tool stations: up to 21 • Indexable tool stations: yes • Tool change system: automatic Extra Information Machine still under power Dimensions Machine Depth 5500 mm