Used Hydraulic Tank for sale (25,978)

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Pgodpfx Aqoyif Nrsier Machine has cushion in table.

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Podpfx Aeww Nccsqiegr Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 1992, sheet width 3000 mm plate thickness 06 mm distance between columns 3200 mm throat 250 mm stroke 180 mm Pedjt Tqnvspfx Aqisgr table width 520 mm table height over floor 1015 mm Number of downholders 8 St. cutting angle 0,5 - 2,5 ° total power requirement 12 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,8 x 2,65 x 2,45 m Machine was overhauled and modernized with light barrier at table. Machine has an automatic back stop with programmable DRO and a sheet lifting device.

Condition: used, mileage: 809,000 km, power: 355 kW (482.67 HP), first registration: 04/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), DAF XF 480 SPACE CAP – RETARDER – 2 TANKS – FULL CAB – FIRST OWNER – ----VEHICLE HISTORY Pgodpsy Tf Tvefx Aqisr – FIRST OWNER – VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT – AUTOMATIC TRANSMISSION – RETARDER – CRUISE CONTROL – LANE KEEPING ASSIST – ACTIVE BRAKE SYSTEM – BLIND SPOT ASSIST – ONBOARD COMPUTER – NAVIGATION SYSTEM – AIR CONDITIONING – AUXILIARY HEATER – 2 XL BERTHS – COMFORT SEATS – HEATED SEATS – REFRIGERATOR – FULL CAB – FRONT AXLE: LEAF SPRING SUSPENSION – REAR AXLE: AIR SUSPENSION – 2 ALUMINUM TANKS – ADBLUE ADDITIONAL INFORMATION – MILEAGE: 809,000 KM – TIRE SIZE FRONT: 385/65 R22.5 – TIRE SIZE REAR: 315/70 R22.5 – GOOD TIRE CONDITION – IMMEDIATELY AVAILABLE – READY FOR IMMEDIATE USE ----EXPORT / NOTE EXPORT SALES ONLY WITH A DEPOSIT OF MIN. 500 € – 2,000 € FOR SALES IN EU AND NON-EU COUNTRIES, A DEPOSIT OF AT LEAST €500.00 / €1,000.00 IS REQUIRED. EXPORT REGISTRATION EXW POSSIBLE WITHIN 10 MINUTES (APPROVED EXPORTER). 5-DAY, 15-DAY, AND 30-DAY TEMPORARY REGISTRATION, AS WELL AS 15-DAY AUSTRIAN REGISTRATION, ARE POSSIBLE. VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. SUBJECT TO CHANGES, ERRORS, AND PRIOR SALE. LEGAL NOTE: THIS SALES ADVERTISEMENT DOES NOT CONSTITUTE AN OFFER IN THE SENSE OF §145 BGB. ALL INFORMATION IS WITHOUT GUARANTEE AND WITHOUT ANY ASSURANCE OF QUALITIES.

Condition: used, mileage: 196,000 km, power: 338 kW (459.55 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, SCANIA R460 – ACC – STAND-UP AIR CONDITIONING – RETARDER – 2 TANKS ----VEHICLE HISTORY GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST ----Scania R460 Super Stand-up Air Conditioning Alcoa Standard Pedpszpgpzsfx Aqiogr Vehicle History German Vehicle * Well-maintained interior * Only 411 operating hours Vehicle Data Manufacturer: Scania * Model: R460 Super * Vehicle Type: R460 4x2 NB * First Registration: 02.02.2024 * Vehicle Class: N3 * Wheel Arrangement: 4x2 * Emission Class: Euro VI E * Power: 460 hp (338 kW) * Engine Displacement: 12,742 cm³ * Fuel: Diesel * Transmission: Scania Opticruise Automatic (12 gears) * Top Speed: 90 km/h Assistance Systems Adaptive Cruise Control (ACC) * Lane Keeping Assist * Active Braking Assist (AEBS) * Differential Lock Driving Comfort Full Air Suspension * Stand-up Air Conditioning * Auxiliary Heater * Air Conditioning * Comfort Seats * Seat Heating * Seat Ventilation * Multifunctional Steering Wheel * On-board Computer * Hands-free System * Navigation System * Refrigerator * Two XL Sleeper Beds Exterior Alcoa Aluminum Rims * Double Tank * Roof Spoiler 4,000 mm * Air-Suspended Rear Axle Axles & Tires Axle Configuration: 4x2 * Front Axle Tires: 385/65 R22.5 * Rear Axle Tires: 315/80 R22.5 * Very Good Tires Weights Permissible Total Weight: 19,000 kg * Permissible Front Axle Load: 7,500 kg * Permissible Rear Axle Load: 11,500 kg * Unladen Weight: 8,091 kg * Permissible Fifth Wheel Load: 10,834 kg * Total Vehicle Weight: 40,000 kg * Total Vehicle Weight (Combined Transport): up to 44,000 kg Dimensions Length: 5,960 mm * Width: 2,550 mm * Height: 3,716 mm * Wheelbase: 3,750 mm Drive & Technology Scania Super Engine * 338 kW / 460 hp * 12-Speed AMT Automatic Transmission * Axle Ratio: 2.714 * AdBlue System * Air Brake System * Pneumatic Trailer Brake System * Air-Suspended Rear Axle Additional Equipment 2 Seats * Double Fuel Tank * Cab with Sleeper Bed * Roof Spoiler * AEBS (Emergency Braking Assist) * Euro VI E * German Vehicle * Immediately Ready for Use ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION AND 17 - 21 DAYS AUSTRIA REGISTRATION EURO 1 VEHICLE RESERVATIONS ONLY VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! A deposit of at least EUR 500.00 / EUR 1,000.00 will be charged for sales to EU and non-EU countries. Changes, errors and prior sale are subject to change! You can find more vehicles on our homepage: Sales are exclusively subject to our general terms and conditions - see homepage. Important Note - Important Information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: ready for operation (used), Year of construction: 1992, Available immediately from our location: Hydraulic single-column press, Edelhoff Type HEP 45 Year of manufacture 1992 Machine complies with the latest UVV regulations Pgedpozwuclofx Aqier Pressing force 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive power 7.5 kW Weight 6 tons 4 guide pins of the upper ram are broken. These need to be unscrewed and replaced. Apart from that, the machine is in perfect working order. Price: EUR 3,000.00 plus VAT, ex works.

Condition: used, Year of construction: 1988, Immediately available from the racing department: Hydraulic four-column press, Hymag Type HS 4 – 160 k Year of manufacture 1988 Pedpfx Aszwucfsqiegr Rebuilt to meet the latest occupational safety standards in 2020 Pressing force 160 tons Table size 1500 x 850 mm Stroke 500 mm Drive power 11 kW Weight 7 tons

Condition: used, mileage: 481,000 km, power: 265 kW (360.30 HP), first registration: 04/2011, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, Manufacturer Scania Model Scania P360 6x2?4 12.500 l. Korp & Son Year 2011 Condition Very good Serial Number YS2P6X20002060373 Ref. nr. 648095 Reg. date: Last seen: 15-01-2026 Hk: 360 Km: 481000 Pgsdpfx Aqeyvnmqeior Gearbox: Opticruise GRS905 Eurotype: 5 Diesel tank: 1 Tank liter: 350 l Rear view camera: ? Cabin heater: ? Air conditioning: ? Cabin type: CP16 Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 315/80 - 385/65 Cover% left 50 - 80 - 40% Front suspension: Air Suspension rear: Air Wheelbase: 4100 mm. Toolbox: ? Hydraulic system: ? Total weight: 27000 kg. Net weight: 14555 kg. Load capacity 12445 kg. Manufacturer: Korp & Son Tank capacity: 12500 + 1500 l. High pressure pump: Pratissoli KF30 High pressure capacity: 106 l/min. 200 bar. Vacuum pump: Moro M9 Vacuum capacity: 15.500 l/min Remote control: ?

Condition: used, mileage: 665,201 km, power: 390 kW (530.25 HP), first registration: 04/2020, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, DAF XF 530 FT SSC 4x2 Semi-Trailer Tractor VIN: G312001 Podpfx Aqozw R Rfeijgr Chassis / Components: * Wheelbase: 3,800 mm * Leaf / Air suspension * Tires: Front: 385/55 R.22.5, Rear: 315/70 R 22.5 * Condition: Front ~50/70%, Rear ~40% * 1 x Aluminum diesel tank, 845 L * 1 x AD-Blue tank * 1 x Hydraulic tank * Saddle plate height: 40 mm Engine / Transmission: * 390 kW // 530 hp // 12,902 cm³ // Euro 6d * ZF Intarder * ZF TraXon // Automatic * Differential lock Cab Equipment: * SSC cab * Leather steering wheel * New tachograph DTCO 4.1 * 2 bunks * Parking heater * Automatic climate control * Parking air conditioning * Refrigerator * Radio CD // CB radio * USB, AUX * Skylights / LED * Light Fix lamp bar with 4 headlights * ACC = Adaptive cruise control * LDWS = Lane departure warning system * AEBS = Autonomous emergency braking system * FCW = Forward collision warning * Side Defender / Turn camera / Dometic Weights: * Gross weight: 20,500 kg * Payload: 12,156 kg * Unladen weight: 8,344 kg Other: * 1 previous owner * German registration * TÜV (German technical inspection) ----New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us!----We speak the following languages: German, English, and Russian!----No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide range of vehicles can be found on 1,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day license plates / Export license plates We will gladly assist you in obtaining export/short-term license plates. Processing of customs formalities We will gladly assist you in handling customs matters.

Condition: used, mileage: 665,201 km, power: 390 kW (530.25 HP), first registration: 04/2020, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, DAF XF 530 FT SSC 4x2 Tractor Unit VIN: G312001 Chassis / Components: * Wheelbase: 3,800 mm * Leaf / Air Suspension * Tires: Front: 385/55 R.22.5, Rear: 315/70 R 22.5 * Condition: Front: ~50/70%, Rear: ~40% * 1 x Aluminum Diesel Tank, 845 L * 1 x AD-Blue Tank * 1 x Hydraulic Tank * Saddle Plate Height: 40 mm Engine / Transmission: * 390 KW // 530 HP // 12,902 cm³ // Euro 6d * ZF Intarder * ZF TraXon // Automatic * Differential Lock Cab Equipment: * SSC Cab * Leather Steering Wheel * New Tachograph DTCO 4.1 * 2 Beds * Auxiliary Heater * Automatic Climate Control * Auxiliary Air Conditioning * Refrigerator * Radio CD // CB Radio * USB, AUX * Skylights / LED * Light Fix Light Bar with 4 Headlights * ACC = Adaptive Cruise Control * LDWS = Lane Departure Warning System * AEBS = Emergency Braking System * FCW = Forward Collision Warning Podpfx Aqjzw R N Ieiegr * Side Defender / Turn Camera / Dometic Weights: * Gross Vehicle Weight (GVW): 20,500 kg * Payload: 12,156 kg * Unladen Weight: 8,344 kg Other: * 1 Previous Owner * German Registration * Valid Inspection (HU) ----New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and transfer of your purchased vehicles within Germany is also possible. Contact us!----We speak the following languages: German, English, and Russian!----No liability for printing & typographical errors, changes, prior sale, and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Due to our many years of experience in the refurbishment and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 10,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly help you load your purchased vehicles. Organizing special transports We will gladly help you organize special transports. Day registrations / export license plates We will gladly help you obtain export/short-term license plates. Handling customs formalities We will gladly help you handle customs matters.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Pgjdjzhn Rqepfx Aqisr Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Psdpfx Aqozhnlzoisgr Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, axle configuration: 3 axles, first registration: 12/1985, suspension: steel, tire size: 385/65 R 22.5, wheelbase: 8,260 mm, Year of construction: 1985, = Additional Options and Accessories = - Leaf spring suspension = Further Information = Axle Configuration Tire Size: 385/65 R 22.5 Axle Brand: BPW Brakes: Drum brakes Suspension: Leaf spring suspension Rear Axle 1: Tire tread depth left: 45%; Tire tread depth right: 45% Rear Axle 2: Tire tread depth left: 40%; Tire tread depth right: 40% Rear Axle 3: Tire tread depth left: 50%; Tire tread depth right: 50% Weights Unladen weight: 8,320 kg Payload: 27,680 kg GVW: 36,000 kg Podjzv U E Djpfx Aqisgr Condition Damage: None Identification License plate: OG-01-89

Condition: used, mileage: 386,000 km, power: 375 kW (509.86 HP), first registration: 02/2021, fuel type: diesel, overall weight: 44,000 kg, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGX 26.510 Flatbed with Tarp, Retarder, XL Tank, Forklift, Navigation, Camera, Full Air Suspension, Steerable/Lift Axle, Euro 6 Internal No. for inquiries: 0826762 Condition: very good * First registration: 01/2021 * Engine power: 375 kW / 510 hp * Engine displacement: 12,419 cc * Permissible total weight: 26,000 kg * Axle configuration: 6x2 * Retarder * ABS * ASR * ESP * Differential lock, rear axle * Lane keeping assist * Adaptive cruise control with emergency braking assist * Audio system: MAN Media Truck radio * Reversing camera * Navigation system * Exterior mirrors, electrically adjustable and heated * Electronic braking system MAN-Brakematic * EURO 6 * Cab: with Nordic insulation * Air-suspended comfort driver's seat * Suspension: Air / Air (Full Air) * Electric windows * AdBlue tank, left side * Electric sunroof * 2x bunk beds * Extendable cooler box under the bunk * Automatic climate control * Auxiliary heater * Tag axle * Lift axle * Sun visor for windshield * Sun visor for side window, driver's door * Multifunction steering wheel * On-board computer * 12 V socket * 24 V socket * Underrun protection * Exterior sun visor, transparent * Forklift * XL tank, right side * Duomatik * Fog lights * Additional headlights on the cab Body: Flatbed with Tarp * Manufacturer: Wecon * Edscha tarp * Safety Roof * Wear-resistant floor, wood Load compartment length: 7,320 mm Load compartment width: 2,480 mm Load compartment height: 2,700 mm Tires: 1st axle: 385 / 55 R 22.5, 20% air suspension 2nd axle: 315 / 70 R 22.5, 30% air suspension 3rd axle: 385 / 55 R 22.5, 20% air suspension, steerable/lift axle Wecon APD 218 Flatbed with Tarp, Edscha, Forklift, SAF axles Internal No. for inquiries: 0826763 * Condition: very good * Year of manufacture: 2019 * ABS * EBS * SAF axles * 2 axles, air-suspended * Underrun protection, aluminum * Edscha tarp Pgsdpezw R Iqjfx Aqijr * Safety Roof * Forklift Load compartment length: 7,250 mm Load compartment width: 2,480 mm Load compartment height: 2,700 mm Tires: * Front axle: 385 / 65 R 22.5, air-suspended / 25% * Rear axle: 385 / 65 R 22.5, air-suspended / 25% ----Price: 64,900,- Euro + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and...? Typographical errors, errors and prior sale are reserved.

Condition: new, tank capacity: 437 l, wall material: stainless steel, Unused, temperature-controlled stainless steel container with insulation Article number: 10910 Volume: Approx. 437L Material: 1.4404 stainless steel V4A Surface: Interior IIId, exterior satin finish Welded seams inside the container pickled, passivated and brushed Operating pressure: ATM Operating pressure for thermoplates: Max. 1.8 bar -Vertical design on three legs Pgjdszwmr Eepfx Aqior -Top: 1/2 hinged lid, 1/2 fixed with screws, with tension handle (can be locked open) -Sheet metal grids below the hinged lid as a strainer, screwed on, removable -1x thermoplate on the cylinder, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -1x thermoplate on the bottom, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -Insulation t=30mm mineral wool for cylinder and bottom, welded stainless steel insulation jacket 1.4301 -Bottom: Conical bottom with central outlet and forward-extending pipe DN50 DIN11851 -Outlet valve: ball valve DN50 DIN11851, gasket EPDM/PTFE -Agitator flange on the top Container dimensions: Outer diameter: 650mm Cylindrical height: 1300mm Overall width: 750mm Overall length: 850mm Overall height: 1930mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4404 / AISI 316 Features: Outlet diameter: DN50 Distance from outlet to bottom: 110mm Height of legs: 330mm Nameplate: yes Agitator: Variable speed propeller agitator for low-viscosity media Type: SRT8-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.75kW Speed: 1410 RPM (continuously adjustable) Voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for smooth running within the speed range -1 piece 3-blade mixing propeller Ø 138mm at the end of the agitator shaft Mixing propeller made of a stainless steel casting, highly polished -Stainless steel flange, sealing V-ring, EPDM -Motor mounted on neoprene rubber buffers Infinitely variable speed control of the agitator motor via a compact, motor-mounted frequency inverter, manufactured by Getriebebau NORD. Including potentiometer. Pre-programmed for agitator operation. Operating voltage 3PH 400V

Condition: good (used), Year of construction: 1987, machine/vehicle number: A20072, Offer 26300 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable, motorized 0.5 - 3° Pjdpfx Aqezw Dt Hoiogr - Manual cutting gap adjustment - Number of hydraulic clamping bars 18 pcs - Motorized rear stop 10 - 1000 mm - Front angle stop - Number of strokes per minute, depending on cutting angle and cutting length 7 - 17 - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - Includes: - Foot switch - Cutting line illumination

Condition: good (used), Year of construction: 1988, machine/vehicle number: 802107, Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable, motorized 0.5 - 3° - Cutting gap adjustment by hand Podpfx Aqjzw Di Ioiegr - Number of hydraulic clamping devices 18 pcs - Motorized rear stop 10 - 750 mm - Front angle stop + support arms - Number of strokes per minute, depending on cutting angle and cutting length 9 - 17 - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space requirement including rear stop, excluding front support arms approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - including: - Foot switch - Cutting line illumination

Condition: used, The SANDT Type 410 is for DIE-Cutting of difficult materials, particularly in the leather goods and printing industries, leather goods, cardboards and plastic. Schwenkarmstanze / hydraulic Clicking Press SANDT Typ 410 Serial-No. 760044 Stanzkraft / Pressure 22000kgs Stanzfläche / Die Cutting area max. 650 x 650mm Tischfläche / Cuttig Surface max. 550 x 900mm Hub 0 - 60mm Abmessungen / machine dimension 900 x 870 x 1400mm Podpfxezukivs Aqisgr Gewicht / weight 840kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), Year of construction: 2022, Sraml 2000 litre s/s tank with mixing Psdpfx Aey Am Aqeqiogr

Condition: used, Year of construction: 1991, Max. Cutting length: 3100 mm Max. Cutting thickness: 10 mm steel Pjdpfshlnv Uex Aqijgr Motor rear stop up to 1000 mm with digital display Side stops and table extensions cutting length limitation Cutting edge lighting Weight: approx. 10,000 kg Caution: The rear stop display is somewhat imprecise (+/- 1 mm)

Condition: good (used), mileage: 561,358 km, power: 480 kW (652.62 HP), first registration: 10/2020, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: AdBlue, EBS, air conditioning, cruise control, electric window regulation, fridge, parking heater, second fuel tank, Technical information Pgodpfszv Tuksx Aqisr Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 7.964 kg Carrying capacity: 11.036 kg GVW: 19.000 kg Maintenance, history and condition APK (MOT): tested until 10/2026 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Heater - Radio/cassette player - Radio/Cd/Audio system - Radio/CD player - Sleeper cab - Speed limiter - Vehicle heater = Remarks = DAF XF 106.480 SC / 2x tank / Automatic

Condition: good (used), Year of construction: 2020, functionality: fully functional, tank capacity: 2,500 l, total length: 1,800 mm, total width: 1,200 mm, total height: 1,740 mm, Storage tank for AdBlue / diesel, 2,500 liters. - without dispensing equipment - DiBt approval - double-walled - 2 cable glands - level indicator - overfill protection - inspection cover DN150 - leak protection Pgedpfxszwg Iae Aqisr - venting and breathing

Condition: like new (used), Horizontal Mixing Tank ROSSI & CATELLI 3,000 L – Stainless Steel ROSSI & CATELLI 3,000-liter horizontal mixing tank, designed for the mixing, homogenization, and intermediate storage of liquid and semi-liquid products in industrial processes within the food industry. Manufactured by ROSSI & CATELLI, the equipment features a horizontal cylindrical configuration and includes a motorized agitation system, allowing the product to remain in motion and achieve uniform mixing throughout the process. Its 3,000-liter capacity and stainless-steel construction make it a particularly interesting solution for facilities that require processing large volumes of product. MAIN FEATURES -Manufacturer: ROSSI & CATELLI -Type: Horizontal mixing tank -Capacity: 3,000 liters -Horizontal cylindrical configuration -Agitation/mixing system -Driven by a motor-reducer -Stainless steel construction -Integrated support structure -Top inspection/access hatch -Sanitary product connections -Product inlet and outlet -Integrated piping and connection system -Designed for batch industrial processes -Hygienic construction for the food industry -Integrable into existing processing lines APPLICATION The ROSSI & CATELLI 3,000 L is designed to perform mixing, homogenization, accumulation, and product maintenance operations within an industrial line. Pgsdpfjzw E Aisx Aqisr The agitation system keeps the components in motion, promoting uniform distribution and helping to prevent separation or sedimentation during certain phases of the process, depending on the characteristics of the product. It can be integrated with: Preparation and mixing systems Sanitary pumps Heat exchangers Pasteurizers Homogenizers Dosing systems Buffer tanks Filling equipment Complete processing lines APPLICATIONS Especially suitable for juice and beverage industries, fruit and vegetable processors, sauce manufacturers, purée producers, concentrate manufacturers, and other food industries that require a large-capacity tank with a mixing system. Depending on its configuration, it can be used with juices, purées, sauces, tomato products, concentrates, fruit preparations, and other liquid or semi-liquid products. The combination of ROSSI & CATELLI, 3,000-liter capacity, horizontal configuration, and agitation system provides a robust solution for industrial mixing and intermediate storage processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), mileage: 764,333 km, power: 303 kW (411.96 HP), first registration: 09/2017, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 7,400 kg, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, tail-lift, = Additional Options and Accessories = - Aluminum fuel tank - Air suspension - Radio/CD player - Side mirrors with electric adjustment - Sun visor - Digital speedometer - Power Take-Off (PTO) = Further Information = General Information Cab: simple Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire tread depth left: 20%; Tire tread depth right: 20%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 295/80 R22.5; Max. axle load: 12000 kg; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Air suspension Rear axle 2: Tire size: 295/80 R22.5; Lift axle; Max. axle load: 7400 kg; Steerable; Tire tread depth left: 20%; Tire tread depth right: 20%; Suspension: Air suspension Pgodpozv Tyyofx Aqijr Weights Unladen weight: 13,160 kg Payload: 12,840 kg GVWR: 26,000 kg Functional Tail lift: Dhollandia Condition Technical condition: very good Optical condition: very good Damage: none

Condition: used, mileage: 386,000 km, power: 375 kW (509.86 HP), first registration: 02/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, loading space length: 7,320 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGX 26.510 Flatbed with Tarp, Retarder, XL Tank, Forklift, Navigation, Camera, Full Air Suspension, Steerable/Lift Axle, Euro 6 Internal No. for inquiries: 0826762 Condition: very good * Engine power: 375 kW, 510 hp * Displacement: 12,419 ccm * Permissible total weight: 26,000 kg * Axle configuration: 6x2 * Wheelbase: 4,810 mm * Retarder * ABS * ASR * ESP * Differential lock, rear axle * Lane keeping assist * Adaptive cruise control with emergency braking assist * Audio system: Radio MAN Media Truck * Rear view camera * Navigation system * Exterior mirrors, electrically adjustable and heated * Electronic braking system MAN-Brakematic * EURO 6 * Cab: with Nordic insulation * Air-suspended comfort driver's seat * Suspension: Air / Air (Full Air) * Power windows * AdBlue tank, left side * Electric sunroof * 2x bunk beds * Pull-out refrigerator under the bunk Pgsdpfx Aqszwyt Nsisr * Automatic climate control * Auxiliary heater * Tag axle * Lift axle * Sun visor for windshield * Sun visor for side window, driver's door * Multifunction steering wheel * On-board computer * 12 V socket * 24 V socket * Underrun protection * Exterior sun visor, transparent * Forklift * XL tank, right side * Duomatik * Fog lights * Auxiliary headlights on the cab Body: Flatbed with Tarp * Manufacturer: Wecon * Edscha tarp * Safety Roof * Wear-resistant floor, wood Load compartment length: 7,320 mm Load compartment width: 2,480 mm Load compartment height: 2,700 mm Tires: 1st axle: 385 / 55 R 22.5, 20% air suspension 2nd axle: 315 / 70 R 22.5, 30% air suspension 3rd axle: 385 / 55 R 22.5, 20% air suspension, steerable/lift axle ----Price: 59,900,- Euro + 19% VAT For further questions, you can reach us on the following phone numbers: We speak: German, English, French and...? Typographical errors, errors and prior sale reserved.