Used Iso 668 for sale (4,757)

Condition: used, Year of construction: 2012, machine/vehicle number: DCM-Pro 1-125 1/1 H2,8 V16/4, overall weight: 240 kg, load capacity: 125 kg, Used Demag slewing jib from the KBK/KBK-AL system with KBK I 3M-1 jib profile. The existing jib has an outreach of approximately 3,000 mm and is designed for manual slewing. A crane column is not part of this system; the jib with slewing bearing mount is included. The system is equipped with a Demag DCM-Pro 1-125 1/1 H2.8 V16/4 electric chain hoist, manufactured in 2012, with a lifting capacity of 125 kg and a lifting height of 2.8 m. The hoist features lifting speeds of 4.0 and 16.0 m/min and is FEM class 4m / ISO class M7. Condition: used, stored disassembled. Dksdpfj Agxd Aox Aa Hew

Condition: used, Year of construction: 2014, machine/vehicle number: G03929/20, overall weight: 815 kg, load capacity: 500 kg, 🇬🇧 Used pillar slewing crane from KONECRANES, type AS5-4.0, manufactured in 2014. The crane has a confirmed lifting capacity of 500 kg and an outreach of 4,000 mm. The total height is approximately 3,650 mm, the lower edge of the jib is approximately 3,400 mm, and the highest hook position is approximately 3,000 mm. The system is equipped with a KONECRANES CLX05 electric chain hoist, manufactured in 2015, with a lifting capacity of 500 kg. The electric chain hoist has lifting speeds of 1.3 / 4.0 m/min, is ISO class M5, has protection class IP55, and is designed for 400 V / 3-phase / 50 Hz. The confirmed scope of supply includes the crane column, slewing jib, electric chain hoist, manual trolley, chain container, hook block, a composite anchor base plate with a diameter of 1,050 mm and fixing bolts, as well as the power supply system on the jib. Dkjdpj Agxd Hsfx Aa Hjw Condition: used, stored disassembled.

Condition: ready for operation (used), Year of construction: 2015, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 410 mm Y-AXIS TRAVEL: 610 mm Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 20-530 mm RAPID FEEDS X-Y-Z: 36 - 36 - 24 m/min SPINDLE: 15000 rpm; ISO 40 A-AXIS: -120°  +30 ° C-AXIS: 360 ° TABLE DIAMETER: 320 mm MAX ADMITTED LOAD: 100 Kg MAX MACHINABLE PIECE DIMENSIONS: ø 400 X 300 mm HIGH PRESSURE COOLANT: 20 Bar TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 7300 Kg OVERALL DIMENSIONS: 2820 x 2020 x 3100 mm ACCESSORIES: SWARF CONVEYOR ; TOUCH PROBE ; Dkedo Ah I Eajpfx Aa Hjw PORTABLE HANDWHEEL

Condition: used, Year of construction: 2000, travel distance X-axis: 4,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 430M, overall weight: 12,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 550 mm Dkedpfx Aas Ah Drye Hew Travel range Z-axis: 600 mm MACHINE DETAILS CNC control: Heidenhain TNC 430M Tool holder: ISO 40 Tool magazine: 22 tool positions Note: The machine is sold without tools.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,739 h, load capacity: 3,500 kg, lifting height: 4,590 mm, free lift: 1,430 mm, fuel type: diesel, mast type: triplex, construction height: 2,180 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,987 kg, drive type: Diesel, Diesel Forklift Dkjdpfx Asyb Urvja Hsw Load centre: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres size: 23x10-12 Rear tyres type: Superelastic Rear tyres size: 21x8-9 Description: Location 02943 Weißwasser Sideshift, 3rd valve, rear work light, front work light, heater, load protection grille, soot filter, full cabin, full free lift, interior mirror, joystick, seat,

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 94681, travel distance X-axis: 700 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, ZEISS PRISMO 5 3D coordinate measuring machine with VAST probing system For sale is a used ZEISS PRISMO 5 3D coordinate measuring machine, serial number 94681. The machine is equipped with a ZEISS-VAST probing system and a comprehensive multi-probe changer. A machine-side ZEISS control console is also included. Additionally available is a cabinet with probes, which is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe inventory can be provided upon request. Machine data Manufacturer: ZEISS Model: PRISMO 5 Serial number: 94681 Probing system: ZEISS VAST Equipment: Multi-probe changer Condition: used ZEISS service and inspection marking The machine has a marking from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to an inspection according to DIN EN ISO 10360. Documented specifications: MPE(E0): 2.70 + L/250 P: 2.00 RONt: 4.40 Type: PRISMO 5 Serial number: 94681 Calibration date: 02/2025 The values stated are reproduced according to the ZEISS marking on the machine. ZEISS CALYPSO 5.8 is visible on the existing control PC. The exact scope of the license or the transferability of an existing software license is not part of this information and can be checked separately if desired. Optionally available In addition, there is the possibility of purchasing a separate cabinet with a comprehensive inventory of ZEISS probes and accessories. This cabinet is not included in the machine price and can be offered separately if desired. Dkedpfjzwvk Rjx Aa Hew Condition and inspection The machine is in used condition. An inspection is possible after prior arrangement. The exact scope of delivery can be agreed upon or checked based on the available components if there is concrete interest. Errors, changes and prior sale are subject to change. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Dksdsx Ad Nlepfx Aa How Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: used, Year of construction: 2013, Technical details: x-travel: 3.600 mm y-travel: 1.100 mm z-travel: 900 mm table surface area: 4.200 x 1.100 mm control: iTNC 530 HSCI HEIDENHAIN turning speeds: 20 - 10.000 1/min taper ISO: SK 50 rapid traverse: 40 m/min tool change unit: 120 Pos. spindle drive: 44 / 32 kW total power requirement: 77 kVA weight of the machine ca.: 31,5 t dimensions of the machine ca.: 7 x 3,5 x 3,2 m 5-axis-simultan universal machining-center, NC-swivelling milling-head (B-axis), rigid table with integrated NC-rotary table (left), dia. 1.050mm (max. table load 1.200kg), internal cooling device 40 bar, coolant 600l, paperfilter, chip conveyor, mode 4, el. handwheel, infrared touch probe TS 649, Dkodpfx Ao Ahywwea Hsw BLUM-Laser, prepared for 3D quickset (software), dividing wall, twin table machining, DMG netservice, mech. setting-up device for toolholders, oilmist suction, flush gun, incl. zero-point-clamping system (as seen on Fotos) machine with energy-saving ballscrews (X, Y, Z) ! approx. 47.000 machine on hours, 13.700 spindle hours *

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 5,790 h, load capacity: 5,000 kg, lifting height: 4,400 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 3,050 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Dksdpfo Agxqcjx Aa Hjw 3rd valve, 4th valve, front work light, dust filter, standard operator protection roof, plastic seat cushion, BlueSpot rear, single pedal

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,298 h, load capacity: 7,000 kg, lifting height: 4,850 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 3,530 mm, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Dkodpfe Afrdgjx Aa Hjw Front tire type: Superelastic Rear tire type: Superelastic 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, compliant with STVZO (German Road Traffic Licensing Regulations), full cabin, air conditioning, interior mirror, rotating beacon, fabric seat cushion, camera, double pedal

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC-Steuerung Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement. Dkjdpo Ahmu Tefx Aa How

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 132 h, load capacity: 18,000 kg, lifting height: 4,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,695 mm, power: 168 kW (228.42 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,140 kg, total length: 5,065 mm, drive type: Diesel, construction width: 2,540 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 100 mm ISO class: Terminal West Mast type: Duplex Transmission: ZF 3WG171 Condition: Ready for use and fully functional Technical condition: very good Dkjdpfxoz Ewg He Aa Hsw Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We will also gladly purchase your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DCG180-6. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale. Side shifter, fork positioner Fork carriage with central leveling; fork positioner opening range: 600 / 2355 mm Rear work light, front work light, heater, full cabin, air conditioning, full free lift, CE certificate, scale, Central lubrication system; 1 rear-view camera on the roof with monitor in the cabin, 1 camera in the mast in combination with the rear-view camera, tire pressure monitoring; engine heater 220 V; Grammer Actimo XL air-suspended driver's seat including seat heating, Forrex fire extinguishing system.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC-Steuerung Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Table Dimensions (Lengthxwidth): 1600 x 1250 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° Dedpfj Ahkwusx Aa Hskw The machine can be viewed under power.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 2,421 h, load capacity: 1,800 kg, lifting height: 4,620 mm, free lift: 1,519 mm, fuel type: gas, mast type: triplex, construction height: 2,121 mm, drive type: Treibgas, Internal combustion forklift Dkjdpfj Ah I T Nsx Aa Hew Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic 3rd valve, 4th valve, rear work light, front work light, interior mirror, standard operator protection canopy, fabric seat cushion, clipboard with LED lighting, BlueSpot front and rear, double pedal.

Condition: used, x-travel 2500 mm y-travel 2000 mm z-travel 1600 mm w-travel 800 mm control Siemens 840 D boring spindle diameter 150 mm bore spindle turning speed range 4-1500 U/min Feeds, stepless (Y, Z) 1-9999 mm/min Rapid Feed Y, Z, W 10000 mm/min Boring spindle taper ISO 50 Milling spindle taper ISO 60 surface area 1600 x 2000 mm workpiece weight max. 12500 kg total connected load 90 kW weight of the machine ca. 32200 kg Dkjdpfx Aezv Ulkja Hsw

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,403 h, load capacity: 2,000 kg, lifting height: 5,500 mm, free lift: 1,780 mm, fuel type: electric, mast type: triplex, construction height: 2,422 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 3,846 kg, total length: 2,098 mm, drive type: Elektro, construction width: 1,120 mm, Electric 3-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: Non-marking Front tire size: 200/50-10 Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire size: 140/55-9 Rear tire condition: 20 - 40% Battery voltage: 48V Dkedpfx Aoz Hgbpsa Hjw Battery capacity: 750Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2018 Battery condition: 60 - 80% Description: Inspection and safety check recently performed Side shifter, fork positioner, 3rd valve, 4th valve, front work light, roof protection, windshield, half-cab, heater, compliant with STVZO (German Road Traffic Licensing Regulations), full cab, full free lift, interior mirror, LED, 2-pedal operation, joystick (Duo-Pilot), comfort seat, panoramic rearview mirror, multi-color display, optional button panel, floor spot light front + rear, electric steering, electric brake, driver's door missing, battery can be regenerated upon request (for an additional charge).

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,175 h, load capacity: 3,500 kg, lifting height: 5,500 mm, free lift: 1,801 mm, fuel type: diesel, mast type: triplex, construction height: 2,570 mm, fork carriage width: 1,120 mm, fork length: 1,800 mm, empty load weight: 5,573 kg, total length: 2,783 mm, drive type: Diesel, construction width: 1,320 mm, Electric 4-wheel forklift Load center: 500 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Dkedpfxo Ahuxls Aa Hjw Technical condition: very good Front tire type: Superelastic Front tire size: 27x10-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 6.5-10 Rear tire condition: 60 - 80% Description: Inspection and safety check recently completed Side shifter, 3rd valve, 4th valve, rear work light, front work light, roof cover, windshield, half cab, heater, load guard, soot filter, compliant with STVZO (German Road Traffic Licensing Regulations), full cab, full free lift, safety light, safety pilot, interior mirror, joystick, single-pedal operation, LED, 1-pedal operation, joystick (Solo Pilot), comfort seat, multi-color display, panoramic rearview mirror, reversing warning, flashing beacon, engine: 43.2 kW Kubota

Condition: ready for operation (used), Year of construction: 2024, operating hours: 54 h, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i-Series, total height: 3,170 mm, total width: 3,850 mm, table width: 1,630 mm, table length: 760 mm, table load: 1,500 kg, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DOOSAN DNM 750 II was manufactured in 2023. It features a generous X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine has a maximum table load capacity of 1,500 kg and a spindle speed range of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 750 II vertical machining centre we have for sale. Contact us for further details. Dksdpfs Ahpqmox Aa Hjw - Manufacturer: DN SOLUTIONS- Model: DNM 750 II- Year of Manufacture / Build Date: 12/2023- CNC Control: FANUC i-Series (Fanuc F0i Touch with Manual Guide / EZ Guide and Fanuc HMI)- Screen Size: 15" Touch Screen- Operating Hours:* Control On (STRG EIN): 299 h 5 min* Operating Time / Run Time: 53 h 54 min 14 s* Machining Time: 40 h 15 min 28 s* Cycle Time: 0 h 0 m 0 s- Travel X-Axis: 1,630 mm- Travel Y-Axis: 762 mm- Travel Z-Axis: 650 mm- Table Size: 1,630 x 760 mm- Table Surface: T-slots (5 - 125 x 18H8)- Max. Workpiece Dimensions / Height: 725 mm- Max. Table Load Capacity: 1,500 kg- Distance Spindle Nose to Table Surface: 150 - 800 mm- Rapid Traverse (X / Y / Z): 30 / 30 / 24 m/min- Max. Cutting Feedrate: 12,000 mm/min- Acceleration / Deceleration Time (X / Y / Z): 150 / 160 / 150 ms- Axis Drive Motor Power (X / Y / Z): 4 / 4 / 4 kW- Ball Screw Diameter x Lead (X / Y / Z): 45 x 12 mm / 45 x 12 mm / 45 x 10 mm- Positioning Accuracy (X / Y / Z): 0.014 mm / 0.008 mm / 0.008 mm- Repeatability (X / Y / Z): 0.007 mm / 0.005 mm / 0.005 mm- Spindle Speed Range: Up to 12,000 rpm- Spindle Drive Type: Direct Connection (Type 2)- Spindle Motor Power (Continuous / S3 25%): 11 kW / 28 kW- Spindle Base Speed: 1,500 rpm- Max. Spindle Torque: 159.3 Nm (S3 15%)- Spindle Clamping Force: 7.35 kN- Tool Holder Taper: SK40 (converted to SK40 per order confirmation DIN 69871 / ISO 7388-3; convertible to BT40 / BBT40)- Spindle Cooling Tank Capacity: 40 L (Cooling capacity 1.56 kW at 50 Hz / 1.76 kW at 60 Hz)- Tool Storage Capacity: 30 tool stations- Tool Selection Type: Memory Random- Max. Tool Diameter (Continuous): 80 mm- Max. Tool Diameter (Adjacent Pots Empty): 125 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Tool Moment: 5.88 Nm- Tool-to-Tool Time: 1.6 s (50 Hz) / 1.3 s (60 Hz)- Chip-to-Chip Time: 4.0 s (50 Hz) / 3.7 s (60 Hz)- Through-Spindle Coolant (TSC / IKZ): Middle pressure, 4.0 kW pump, 20 bar, 25 µm cyclone filter- External Flood Coolant: 1.8 kW pump, 7 bar, 30 L/min- Coolant Flush Pump (Inside Flushing): 1.1 kW, max. 0.75 MPa (50 Hz), 20 L/min- Coolant Tank Capacity: 520 L- Coolant Gun: Included (with separate pump 0.6 kW)- Air Gun: Included- Spindle Compressed Air Blow: Compressed air outlet above spindle for chuck/fixture cleaning- Oil Skimmer: Belt type- Mist Collector / Oil Mist Extraction: Dormatec AF-30P (0.75 kW, 29 m³/min capacity, 200 mm inlet, H13 filter, 99.

Condition: used, functionality: fully functional, Year of construction: 2027, operating hours: 2 h, load capacity: 5,000 kg, lifting height: 4,700 mm, free lift: 15,900 mm, fuel type: diesel, mast type: triplex, construction height: 2,605 mm, fork carriage width: 1,670 mm, empty load weight: 8,565 kg, total length: 3,850 mm, drive type: Diesel, construction width: 2,100 mm, Rough-terrain forklift ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: New Front tire type: Pneumatic Front tire size: 405/65-22.5 Rear tire type: Pneumatic Rear tire size: 340/80R18 Description: In addition to this Manitou model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this M50-4D ST5 S1 EU. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and special construction of forklifts from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment. Heater, full cabin, full free lift, 4x4 Dodpe Ah Urwofx Aa Hekw

Condition: used, functionality: fully functional, Year of construction: 1994, operating hours: 11,739 h, load capacity: 3,500 kg, lifting height: 4,420 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,900 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Dksdpfx Ao Agxp Rja Hew Side shifter, 3rd valve, rear work light, front work light, half cab, plastic seat cushion, double pedal

Condition: used, TOS W100A - Horizontal Boring and Milling Machine The W100A is one of the most successful models from TOS Varnsdorf and represents the latest version of the classic series (H100, H100A, W100, W100A). It is robustly built, technologically versatile, and easy to operate and maintain. Ideal for single and small batch production with high reliability and comparatively low costs. - Classic design with a fixed column Dksdpfxs Ahg Dte Aa Hew - Extendable spindle - Cross-traveling, rotatable work table - Integrated faceplate support in the spindle head - Option to use long drill rods with support from the drill support - Hardened and ground guide rails - Central lubrication - Position indicator The machine is suitable for drilling, milling, facing, and threading, as well as general machining operations on large workpieces. Technical data Spindle head: - Spindle diameter: 100 mm - Spindle connection: ISO 50 - Spindle travel (Z): 900 mm - Spindle center height above the table (Y): 0 - 1120 mm - Distance between faceplate and support bearing: 2800 mm - Faceplate diameter: 600 mm - Centering hole diameter in the table plate: 280 H6 mm - Centering hole depth: 8 mm - Max. facing diameter: 900 mm T-slots: - Faceplate, number/size/pitch: 2 / 20 H12 / 335 mm - Slide, number/size/pitch: 2 / 16 H12 / 150 mm Table: - Table cross travel (X): 1600 mm - Table longitudinal travel (W): 1250 mm - Clamping area: 1250 × 1250 mm - T-slots, number/size/pitch: 9 / 22 mm / 160/80 mm - Centering hole diameter in the table: 180 H6 mm - Centering hole depth in the table: 6 mm - Max. workpiece weight: 3000 kg - Tailstock slide travel: 1000 mm Speed: - Number of spindle speed steps: 23 - Spindle speed range: 7.1 – 1120 rpm - Number of faceplate speed steps: 16 - Faceplate speed range: 7.1 - 224 rpm - Max. torque of the spindle at speed: 3350 / 7.1 - 78.5 / 1120 Nm/rpm Feeds: - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 18 - 900 mm/min - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 25 - 1400 mm/min Rapid traverses: - Spindle, spindle head, table & tool slide: 2800 mm/min - Table rotation: 1 rpm - Tailstock bearing: 696 mm/min Threads: - Metric threads, number/range: 18 / 0.25 – 12 mm - Inch threads, number/range: 18 / 120 - 2.5 threads/1" Electrical data: - Main motor power: 11 kW - Total power consumption: 15 kW - Operating voltage: 3x 400 V / 50 Hz Dimensions & weights: - Machine dimensions WxHxD: approx. 6020 × 3000 x 3500 mm - Machine weight: approx. 14000 kg

Condition: new, power: 184 kW (250.17 HP), first registration: 12/2023, fuel type: diesel, tire size: 14.00R20, axle configuration: 4x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel, total length: 8,500 mm, total width: 2,500 mm, total height: 3,350 mm, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Sun visor = Notes = Model year: 2024 = Company Information = Van Vliet Automotive Trading - Your Truck Partner A wide selection of new trucks, trailers, 4x4 vehicles, and machinery. Ready for immediate use! Our in-house (design) workshops, modification center, and paint shop guarantee fast and project-specific processing of your order, anywhere in the world. ISO and AEO certified. Logistics processing and customs/export facilities. Worldwide spare parts service. International team of mechanics and trainers operating worldwide to provide technical support and training. Contact our experienced, multilingual team of customer service representatives now for professional, project-specific, and competitive advice. = Additional Information = General Information Year of construction: 2023 Model year: 2024 Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Djdpfozqq Sisx Aa Hjkw Transmission Transmission: TipMatic 12.12 OD, automatic Axle Configuration Tire size: 14.00R20 Brakes: Drum brakes Suspension: Leaf spring suspension Weights Unladen weight: 6,528 kg Payload: 11,472 kg GVW: 18,000 kg = Company Information = WE PROVIDE, YOU ACCELERATE. Without boundaries. Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported with comprehensive after-sales services, such as supplying parts and providing (local) training.

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, HOT-DIPPED GALVANIZED, reinforced design, air-suspended with lift axle, axle load gauge for axle load, platform length approximately 4,180 mm, low-loader length approximately 9,400 mm, loading height approximately 900 mm, front wall approximately 1,600 mm high, 14 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing eyes, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €2,200, subject to printing errors, errors and changes, sample images, more details at: ! Dksde Aidimjpfx Aa Hjw

Condition: ready for operation (used), Year of construction: 2023, operating hours: 533 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, table width: 600 mm, table length: 1,200 mm, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis POSmill CE1000 was manufactured in 2023. It features an X-axis travel of 1,060 mm, Y-axis travel of 600 mm, and Z-axis travel of 600 mm. The machine is equipped with a Heidenhain TNC 640 control unit and has a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill CE1000 vertical machining centre we have for sale. Contact us for further details. Dsdpfxoznkrdj Aa Hskw - Coolant Supply Through Spindle / High Pressure: 20 bar- Rated Power: 30 kVA- Voltage: 400 V (3-Phase, 50 Hz)- Full Load Current: 52 A- Max. Current Load: 250 A- Short-Circuit Resistance: 25 kA- Spindle Hours: 533 h- Power-on Hours Machine / Control: 2,410 h / 2,436 h- Tool Changer: 40-fold ISO 40- Internal Coolant Supply (IKZ): 20 bar with belt filter system- Equipment: Documentation/Manual, chip conveyor, external high-pressure coolant unit/tank with filtration, pneumatic maintenance unit, electronic handwheel- Condition: Very good, fully functional; checked in late 2025 by POSMILL with no defects found, proofs available- Usage History: Exclusively soft-annealed tool steels (no hard or dry machining)- Measuring Systems: Heidenhain linear measuring system (X, Y, Z), Wireless Pick Up tool measuring system 35.40 TS, Workpiece measuring system 25.50-HDR Technical Specification Through-spindle Coolant Yes Taper Size ISO 40

Condition: used, Year of construction: 2000, x-travel 1200 mm y-travel 620 mm z-travel 520 mm control TNC410 HH table-size 1550 x 600 mm Dkedpfx Aae Aiiq Eo Hsw feeds 1-30000 mm/min rapid traverse 45 m/min spindle turning speed - stepless 40- 8000 U/min spindle taper ISO 40 tool change unit 30 Pos. total power requirement 20 KVA weight of the machine ca. 9 t dimensions of the machine ca. 4,2 x 2,3 x 2,7 m This machine does have a long table for long parts or with a partition to work by shuttle machining. Control: Heidenhain TNC 410. We supply 3 pieces additional tables along with the machine.