Kaeser m 100 for sale
Identified location: Ashburn (US) (Edit)
Field of application: Construction
Empty weight: 1.473 kg
Make of engine: Kubota V3800Di-T
Capacity: 10 m³/m
Technical condition: average
EPA marked
Qnzzu2u
Compressor type: Screw compressors
Transport dimensions (LxWxH): 2.6x1.44x1.16
Working pressure: 7 bar more
Field of application: Construction
Empty weight: 460 kg
Make of engine: Kubota D722
Capacity: 2 m³/m
Compressor type: Screw compressors
Transport dimensions (LxWxH): 133x90x79
Working pressure: 7 bar
Bjcplmpang more
Approx. 100 running metres of Schäfer type R3000 shelving
New and used goods, see pictures
height 2,5 m
Blrupksna8
depth 40 cm
Load/tray 100 kg
negotiation price: € 6.270,-- net ex stock
Offer consists of:
101 pcs. upright or frame, 2,5 m, galvanized new
500 pcs. Shelves, 100 kg load capacity/ shelf, galvanised used
34 pcs. cross bracings for bracing
5 levels per field (of course, several levels are possible for an extra charge)
Goods are in stock.
Transport and assembly possible ... more
Mobile screw compressor Kaeser M 250
Air brake with ABS, truck DIN eyelet
- max. working pressure: 12 bar
- air volume: 21m³ /min
-integrated compressed air preparation F (99.998% techn. oil-free)
- SCR catalytic converter (exhaust gas stage IV)
- Sigma Control Mobile
- Spark arrestors (chemical / petrochemical)
- Check valve
C9km2ym2
- GSM/GPS modem more
Field of application: Construction
Make of engine: Kubota D722
Capacity: 2 m³/m
Technical condition: average
Compressor type: Screw compressors
Working pressure: 7 bar
Bjcplc70zf more
Field of application: Construction
Empty weight: 457 kg
Make of engine: Kubota D722
Capacity: 2 m³/m
Bjcplwagbh
Technical condition: average
Compressor type: Screw compressors
Transport dimensions (LxWxH): 1.4x0.85x0.9
Working pressure: 7 bar more
100 running metres Jungheinrich MPB pallet racking
As good as new, see pictures.
Manufacturer Jungheinrich
Height 4,5 m
depth 110 cm
support length 2,7 m
Load/tray 1650 kg
Painted frame, infill and foot plates galvanized,
Field loads 15 tons.
Supports yellow, support lengths of 1.8 m, 2.7 m and 3.6 m in stock.
Heights from 2 m to 8 m.
K8khv0dp
negotiation price: € 7.990,-- net ex stock
Offer consists of:
+ 37 pcs. frame pre-assembled, 15t field load, depth 110 cm, height 4,5 m
+216 pcs. carri... more
Field of application: Construction
Empty weight: 1.345 kg
Make of engine: Kubota V2203-EU1
Capacity: 5,2 m³/m
Technical condition: average
EPA marked
Compressor type: Screw compressors
Transport dimensions (LxWxH): 4.15x1.65x1.42
Working pressure: 7 bar
Bbwpt8tdnz more
Approx. 100 running metres Schäfer shelving
Second-hand goods, see pictures
height 2,5 m
depth 60 cm
Load/tray 80 kg
Field width 130 cm
negotiation price: € 4.550,-- net ex stock
Offer consists of:
2rxefq
78 upright or frame, 2.5 m, galvanised
308 pcs. shelves, 130 cm long, 80 kg load capacity/ shelf, galvanised
1232 pcs. suspension pin
26 pcs. cross bracings for bracing
4 levels per field (of course, several levels are possible for an extra charge)
Goods are in stock.
Transpor... more
2010
used
Field of application: Construction
Make of engine: Kubota D722
Capacity: 2 m³/m
2z0ybafz
Technical condition: average
Compressor type: Screw compressors
Working pressure: 7 bar more
Jungheinrich electric pallet truck ECP 100
used, good condition, see pictures
Year of manufacture 2003
lifting height 1,75 m
Load capacity/load 1000 kg
Bfmwyi8y93
Operating hours 9202 h
Own weight without battery 1498 kg
Battery weight 525 kg
fork length 120cm
incl. charger
negotiation price: € 1.790,-- net ex stock
Goods are in stock.
Transportation possible on request.
Visits possible at any time by appointment.
Further information on request.
Constantly over 5000 running meters of pallet r... more
100 running m shelf rack Schäfer type R3000
New and used goods, see pictures
height 2,5 m
depth 40 cm
Load/compartment 150 kg
Field width 128 cm
negotiation price: € 6.220,-- net ex stock
Offer consists of:
Bfsf2njg9n
78 upright or frame, 2.5 m, galvanized new
462 pcs. shelves, 150 kg load capacity/ shelf, galvanized used
26 pcs. cross bracings for bracing
6 levels per field (of course, several levels are possible for an extra charge)
Field width also available in 100 cm!
Goods ar... more
Technical DataPayload: 0/100 KgArm reach: 3.00 mmNumber of Axis: 6Repeatability: 0.10 mmRobot weight: 2230 KgMounting: FloorTechnical Data:
• Payload: 100Kg.
• Arm Reach: 3,0 mm.
• Repeatability: 0.1 mm.
• Controller: M2000 S4CPlus.
Axis motion speed:
• Axis 1: 110º/s
• Axis 2: 100º/s
• Axis 3: 100º/s
M78rwd
• Axis 4: 210º/s
• Axis 5: 150º/s
• Axis 6: 210º/s
Applications
Stud Welding
Assembly of parts
Handling of parts
... more
used
Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders
-Travel 100 mm
-Piston Ø 40 mm
Bgrmb2b3y0
-Piston rod Ø 16 mm
-p1 - 16 bar
-Price per piece
-Number of 2
-Dimension 330/53/H53 mm
-Weight 1.3 kg/pc. more
Maschinen-Details
Lagernummer 1105-03059
Maschinenart CNC Drehmaschine
Fabrikat FEMCO Dugard astrhal
Typ 40/100 M
Baujahr 2001
Steuerungsart CNC
Lagerort HAGUENAU
Ursprungsland KOREA
Lieferzeit SOFORT
Frachtbasis AB STANDORT
Technische Details
Drehdurchmesser 580 mm
Drehlänge 1000 mm
Steuerung FANUC 18 TB
Spitzenweite 1090 mm
Drehdurchmesser über Bett 480 mm
Spindeldurchlass 75 mm
Drehzahl 2500 U/min
Revolverkopf (x-fach) 12
Spindel 18.5/22 kW
Eilgang X-Achse 24 m/min
Eilgang Z-Achse 24 m/min
Z... more
1973
used
Univ. tool room milling machine MACMON (Germany) type M 100
Fabr. No. 1267 built in 1973
Routes x 310 mm, Y: 170 mm Z: 340 mm
Table size 600 x 215 mm
Spindle retainer for SK 40 - M16
Horizontal spindle speed 40-2000 RPM 16 levels
Vertical spindle speed 50-2500 RPM 16 levels
Feed 9-450 mm / min. 16 levels
Pinolverschiebung 60 mm on the vertical head
Motor output 1,5 kW
Power supply 380 v, 50 Hz
-automatic feed in X and Z axis
-2-axis digital MITUTOYO for X and Y
-fixed angle table
-Coolant system... more
turning diameter over bed 2400 mm
turning diameter over slide rest 2000 mm
turning length 1800 mm
power capacity 95 kW
max. torque on faceplate 80000 Nm
main spindle speeds: 1-200 U/min
main spindle bore 150 mm
max. workpiece weight at 540 mm 8000 kg
faceplate diameter 2400 mm
total power requirement 125 kW
weight of the machine ca. 40 t
dimensions of the machine ca. 10,4x7x4,3 m
Modernized and equipped with Siemens 840 D SL in 2014!
Machine has following options:
- Linear measuring system... more
pressure 100 t
stroke 380 mm
table surface area 1100 x 300 mm
press capacity 981 kN
Pressure power 258 bar
working width 1100 mm
pressing speed 2,47 mm/sec
feed speeds 7,54 mm/sec
return speed 9,06 mm/sec
Ø 220 mm
speeds 3000 U/min
total power requirement 2,2 kW
weight of the machine ca. 1,0 t
dimensions of the machine ca. 1,7 x 0,9 x 2,2 m
791/5000
100 tons motorized workshop press with sliding cylinder. The hydraulics work extremely precisely in both electrical and manual mode.
Equipped w... more
pressure 100 t
stroke 380 mm
table surface area 1100 x 300 mm
pressure 981 kN
Pressure power 258 bar
working width 1100 mm
pressing speed 2,47 mm/sec
feed speeds 7,54 mm/min
return speed 9,06 mm/sec
speeds 3000 U/min
oil volume l
IP protection class
total power requirement 2,2 kW
weight of the machine ca. 1000 kg
dimensions 1700 x 900 x 2200 mm
Bgzrvavi0t
Movable cylinder (left-right)
Integrated pressure manometer
Pressure regulation
Hydraulic unit with two speeds
In height adjustable work... more
used
Screw compressor, compressor, compressed air unit, stationary air compressor
-Screw compressor with refrigeration dryer
-Delivery quantity 0,97 m³ / min
-Motor power 7.5 kW
-max. Pressure 11 bar
-Dimensions 610/760/H1290 mm
-Weight 260 kg
Beuq0rq0la more
ready for operation (used)
Baumller DS 100 M motor 20111239 , art. no. 312114 28kW 3000 1/min 83A 100Nm , shaft- 32mm, distance between mounting holes 152mm, second-hand, 100% functional ATTENTION: Please inquire separately for packing and shipping costs! ATTENTION: Please inquire for charges for packing and transport separately!
Bfdltyxwue more
Table: 520 X 420 mm,
Nicueav9
Speeds: 4000/6000/7500 rpm,
Drive: 1.8 KW,
Remark:,
with additional horizontal sawing unit (1.5 kW) for,
Two-sided machining with roller conveyor and,
lateral material guide,
everything can be easily dismantled,
Weight: 150 kg more
new
Pressing force 100 to
Stand width 1,050 mm
Delivery time approx. 6-8 weeks from the date of placing of the order
Pressing force: 100 to
Stroke: 350 mm
Light stand width: 1,050 mm
Working speed: 2 mm/sec
Rapid response: 28 mm/sec
Engine: 2 kW
Horizontally movable cylinder 650 mm:
Length: 1,950 mm
Nunvjiy
Width: 1,000 mm
Height: 2,250 mm
Weight: 1.220 kg
Horizontally movable cylinder 650 mm2 speedsworktop can be lifted with a chainOperation via hand lever and push-button (2-hand)adjustable maximu... more
pressure 100 t
Bjteo0y0sa
stroke 380 mm
table surface area 1500 mm
press capacity 981 kN
Pressure power 258 bar
working width 1500 mm
pressing speed 2,47 mm/sec
feed speeds 7,54 mm/sec
return speed 9,06 mm/sec
Ø 220 mm
total power requirement 2,2 kW
weight of the machine ca. 1,2 t
dimensions of the machine ca. 2,1 x 0,9 x 2,2 m
This 100 ton motorized workshop press with sliding cylinder is very robustly constructed and manufactured in the Netherlands. This model has an extra wide working wid... more
2017
new
2009
used
Screw compressor, compressor, compressed air unit, stationary air compressor
-Screw compressor with refrigeration dryer
-Delivery quantity 1.01 m³ / min
-Motor power 7.5 kW
-Max. Pressure 11 bar
-Operating hours h
Beuq0h9uw9
-Load hours h
-Year of construction 2009
-Dimensions 630/1040 / H1085 mm
-Weight 286 kg more
ready for operation (used)
Leuze BPS 34 S M 100 50038007 Barcode positioning system, as good as new ! , 100 % functional
B7kkhzii more
pressure:100 t
distance between columns:2850 mm
stroke:1300 mm
table surface area:2740 x 1400 mm
tool dimensions (W x L) max.:2400 x 1400 mm
distance table/ram, max. stroke up, adjustment up:1800 mm
table height over floor:430 mm
ram surface:2670 x 1400 mm
tool weight upper plate max.:10 t
tool weight lower plate max.:15 t
power capacity:10,0 kW
weight:14,5 t
Gvwnhc
Dimensions (WxDxH):5,6 x 1,7 x 3,1 m more
used
Pneumatic cylinders, air cylinders, pneumatic rams, air rams
-Stroke: 100 mm
Rtbxwupjq
-Piston diameter: 100 mm
-Piston rod: mm
-Total length: 215 mm
-Total length extended: 470 mm
-Air inlet and outlet: adjustable
-Number: 2 pieces available
-Price per piece
-Dimensions: 370/120/H190 mm
-Weight: 7 kg/piece more
x-travel 310 mm
y-travel 170 mm
z-travel 350 mm
spindle taper ISO 40
spindle turning speed range 40 - 2500 U/min
table-size 600 x 215 mm
feeds: 9 - 450 mm/min
Nlpjh
power capacity 2,3 kW
quill stroke 70 mm
coolant
voltage 380 V
total power requirement 2,5 kW
weight of the machine ca. 860 kg
dimensions of the machine ca. 1,10 x 1,30 x 1,60 m
- [...]: 1216
- 3 Axis digital readout
- Feed in X & Z Axis
- coolant equipment more
ELESTA x-y digital display
x-path 310 mm
y-path 170 mm
z-path 350 mm
Spindle mount ISO 40
Spindle speeds 40 - 2500 rpm
Table size 600 x 215 mm
Feed rates: 9 - 450 mm/min
Drive power 2,3 kW
quill stroke 70 mm
Coolant system
Operating voltage 380 V
Total power requirement 2.5 kW
Nzxed
Machine weight approx. 860 kg
Space requirement approx. 1.10 x 1.30 x 1.60 m more
6x Kaeser compressors in very good condition!
- built-in aftercooler
Obqwv
- Mercedes V8
- 27 cubic metres per minute more
used
Three-phase synchronous motor, gear motor, electric motor
-Speed: 3000 rpm
-Power: 22 kW
-Brake
3fdjjrqt
-external fan
-Construction: hollow shaft
-Diameter shaft: Ø 65 mm
-Brake
-Protection class: IP 54
-Number: 4x engines available
-Price: per piece
-Dimensions: 1150/300/H400 mm
-Weight: 180 kg more
Machining centre vertical BC 100 M - 6500
Producer: Hedelius
YP: 2009
Control Siemens ... Sinumerik 840 D
Clamping table surface ... 7200x1000mm
Axis X ... 6500mm
Y axis ... 1000mm
Z axis ... 770mm
Spindle speed ... 30-6000 / min.
controlled axes ... 3
IKZ
HSK A100
Max. Workpiece weight ... 6500kg
Max spindle torque ... 360Nm
L x W x H ... 13000x5000x3700mm
Machine weight ... 38500kg
Magazine locations ... 30
The machine is in good condition, possible to test under power
Gfxn2vh more
pressure:100 t
throat:360 mm
Wwgfcdu8k
stroke:500 mm
distance table/ram, max. stroke up, adjustment up:800 mm
table surface area:900 x 560 mm
table height over floor:710 mm
ram surface:630 x 400 mm
speed down:200 mm/s
speed up:200 mm/s
power requirement:17,0 kW
weight:5,0 t
Dimensions (WxDxH):1,2 x 1,9 x 3,3 m
German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 more
2018
new