Komatsu pw 130 es buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
Stainless steel tanks, stainless steel tanks, silo system, tank, manure storage silo -stainless steel Capacity approx. 1300 ltr -Füll-and drain fitting Dimensions 1350/1280/H2030 mm D89737qe Weight 274 kg more
4
Double upright eccentric press with renewed control Siemens S 7 Manufacturer: Paul Mueller type: PZE 315 x 1300 RIHK built: 1990, the press was 2015 completely overhauled Force Max at 30 ° before UT 315 tons Arbeitsverm. will run at 35 strokes/min. approximately 29000 nm distance between the stands 1300 mm stroke adjustable 20-180 mm 150 mm largest tappet adjustment distance plunger table 750 mm table size 1250 x 1220 mm plunger surface 1200 x 1200 mm number of declines of 30- 70 / min. ... more
1
Make: Trump card Type: TrumaBend V 130 Year of construction: 2001 Bending length: 3060 mm Pressing force: to 130 Control: Delem DA 65 Hours of operation: 30477 (11.12.2017) Stroke: 215 mm Usable height: 385 mm Free stand passage: 2690 mm Throat depth: 410 mm Delivery speed: 200 mm / s Folding speed: 1-10 mm/s Return speed: 135 mm / s Working height: 1050 mm Length: 3640 mm Width: 2060 mm Height: 2375 mm : Weight 11250 Standard equipment -Stable machine frame as a welded con... more
6
Manufacturer BOA Typ Impress D130-110-B-5/5-1.6 Year of construction 2009 Hours of operation 15.576 hours Press power main press 127 to Specific press capacity 10,5 kg/cm² Working pressure 280 bar Feed channel 1.620 x 1.000 mm (l x w) Press volume / cycle 4,1 cbm Throughput rate under operating conditions Up to 865 cbm/h Cycle time under operating conditions 22 sec. Press stroke 2.900 mm Bam7bl83fd Bale size 1.100 x 1.100 mm (w x h) length adjustable Driving motor 2 x 55 kW Connected load 132 ... more
6
IntNr.: 5081 * Device details: * Load capacity: 4000 kg Lifting height: 3200 mm Mast type: Duplex mast height: 2200 mm Length/width/height: 2950 / 1340 / 2120 mm Operating weight: 5860 kg * Equipment: * * Protection umbrella * 3rd valve * Attachments: * * Load backrest New hydraulic pump Large maintenance done All filters and oils new New seat On request we take care of transport to you. 9pg0b8zyv Another 250-300 forklifts, attachments and sweepers for you available im... more
6
5 speed: 3000/4500/6000/7000/10000 rpm Fbxwk3pmy Left and right direction on spindle Spindle: 30mm Extra long table with width extention for wide / long items Engine: 5.5 KW Big sliding table COMATIC feeder with 4 speed Spindle key Extra box for dust extraction Original SCM box diagram with manual / electric The moulder is in very good condition more
5
Output module, CPU card, input processor, power supply, tax map, input card, control, edgebander, edge Bander Manufacturers Soprel Type PWME 140 x 8/16 Type PN. 1: 30.151 Servo drive -2 x control cards available Award pieces Dimensions 325/220/H65 mm Weight 2.6 kg Escxupbr0 more
5
x-axis: 150-180 mm y-axis: 70-80 mm turning length: 180 mm number of slides: 2 control: SPS Tecomat NS 950 spindle diameter: 160 mm total power requirement: 12 kVA weight of the machine ca.: 2,2 t space requirement approx.:: L:2,0xB:2,0xH:2,3 m Single spindle short turning automatic (Ends-Lathing Automatic) Construction Single spindle-horizontal, for serial production of small parts Turning dia.: lateral face turning =60-140mm; longitudinal lathing=ca.160mm Swing dia.: Two cross moving tables a... more
5
grinding diameter:300 mm grinding length:700 mm centre height:130 mm Meg0v grinding wheel diameter:280 mm dimensions of the machine ca.:3 x 2 x 1,6 m with internal grinding attachment with fixed and swivelling headstock paperbelt filtering unit steady dressing unit diverse accessories more


komatsu pw...
every day

New machines via email!

Be informed!
Pressure 100 t Ram stroke 20 – 120 mm Ram adjustment motor driven 0 – 80 mm Shut height (stroke down adjustment up) 450 mm Table surface area 1.200 x 800 mm Ram surface area 1.120 x 620 mm Scrap hole in table 900 x 200 mm Table height over floor 1.000 mm Number of strokes 40 – 240 spm Side opening in side column 400 x 370 mm Bakunmn3zn Required power 30 kW Height ca. 3.700 mm Dimensions 3.550 x 2.100 x 3.700 Weight ca. 20 t Inclusive feeding unit more
3
heavy veneer press with press area: 2500x1300mm 6 press cylinder Seals in excellent condition Aluminium heating plates Baj9jfr9oq now available from customer site Shipping charge option available more
5
Driving with the bezel, revolving bezel, put stock, Lynette-max outlet Ø 130 mm run brass Tip height 260 mm Add to them the photos Price per piece -1 x available Dimensions 560/100/H570 mm Weight 27 kg Mtr2z more
5
Press brake machine name Stock no. MA837 Manufacturer TRUMPF TYPE TrumaBend V130 X Ofev7bx3h Year of construction 1998 Weight-12900 kg Size B L 2210 x 3640 x H 2885 mm Hours of operation 24368 (27.06.2013) Control DA69 Pressing force 130 tons Bending length 3060 mm Usable height of 535 mm Clearance between the stands 2690 mm Zustellgeschweindigkeit 200 mm / s Abkantgeschweindigkeit 1-10 mm/s Retreat speed 135 mm / s Throat depth 410 mm Stroke 365 mm Working height 1050 mm Fac... more
4
used from spare parts 1 x Mannesmann Demag GCH 125 D2 1301 Gleichstromotor with brake technical data: Type: GCH 125 D2 1301 365 V 13.3 A 4,0 kW 2800 rpm with brake 13.0 Nm with Hübner TDP 0,2 LT-4 speedometer N2roy2dj Wavelength: approx. 42 mm Shaft diameter: 32 mm Space Lxwxh: approx. 850 x 230 x 320 mm more
6
We offer: Injection moulding machines ENGEL's 1300 150 control CC 90 The molding is sold due to a Geschaefsumstelllung and new acquisition for our clients. The injection moulding machine has worked up to the production setting. Technical data Manufacturer: ENGEL Austria Type: Angel's 1300 150 control CC 90 Serial No.: 214430 Year of construction: 1991 Hours of operation: 78691 Steering: CC 90 Clamping unit Clamping force: 150 t = approx. 1500 kN Opening stroke: 460 mm Auss... more
3
working hours 79700 h pressing force 1300 kN Folding 3060 mm installation height 535 mm stroke 365 mm distance between columns 2690 mm stand projection 410 mm table hight 1050 mm table width 120 mm connected load 18,8 kVA Depth of the machine 2210 mm Width of the machine 3640 mm Height of machine 2885 mm weight 12950 kg oil Content 250 l Rapid 200 mm/s working Speed 1 - 10 mm/s withdrawal Speed 135 mm/s Speed X-axis 500 mm/s Speed R-axis 300 mm/s Speed Z-axis 1000 mm/s Posit... more
3
Suitable for casting samples 55x10x10 mm / 0,7 cm² M0afb Proofed in 2013 by the company Latzke more
5
Frequency inverters, frequency converters, drive-Siemens SINAMICS Active Line Module 6SL3130-7TE23-6AA3-max power 36kW 480V 50/60Hz input 3AC380-output DC 600V 60A 36KW-several converters available-price-piece dimensions 500/150/H270 mm - weight 10.7 kg Qkr800ijt more
5
Number 11-99-4 Concentricity test instrument manufacturer Type SPW 720 Machine data Bia8tlg Year of construction: approx. 1985 L x W x H: CA. 1250 x 250 x 420 mm Weight: approx. 100 kg Very good condition Technical data Concentricity test instrument Maximum wave - length between centers: approx. 720 mm Maximum wave - length Prism: approx. 1500 mm Tip height: approx. 250 mm Maximum circular Ø: approx. Ø 500 mm 2 piece grooves Prism for long shafts on trestle (see p... more
6
MFD HOESCH Rail – Way Lathe - Make MFD HOESCH - Germany - Typ DRH 130 II – K - S - Age 1965 - Mach.No. s/n100562 - Height of centers : 800 - Rail track gauge : 1.435 - Max. wheel tread Ø. : 1.350 Xfh2ns9wu - Min. wheel tread Ø. : 750 - Max. axle length wheel set: 2.350 - Min. axle length wheel set: 2.050 - Max. clamping Ø. : 1.050 - Min. clamping Ø. : 700 - Face plate Ø. : 1.400 - Power. 400 V / 90 kW - Weight. Ca. 40 tonn Please Note: The above information has been obtained to the b... more
6
Technical details Pressure 130 t Throat depth 400 mm Stroke 30-130 mm Tappet adjustment 75 mm Stroke rate 45 stroke/min Installation height (stroke down, d. above) 500 mm Top 1000 x 750 mm Plunger area 610 x 410 mm Hole (depth x diameter) 50 x 85 mm Diarrhea opening in the table 250 x 200 mm Total power consumption 10 kW Machine weight approx. 9.7 t Space requirement approx. 2.7 x 1.5 x 2.9 m Msokt more
3
U 250 / 130 Bürkle veneer press Mts3tk Press area 2500 x 1300 mm Piston number 6 Opening width 400 mm weight with 2 plates approx. 3000 kg Length 3150 mm Approx. 1400 mm wide Height approx 1785 mm Location: At Camp 54634 Bitburg more
5
Hydraulic cylinder, vertical Moovable cylinder Piston diameter approx. 130 mm Piston rod 100 mm Stroke approx. 700 mm -with support rollers -Cylinder with manual pump -3 x cylinders available Award pieces 20sqy3fj more
5
Hot plate 1250 x 2200 electrically heated 3o9g7iux more
1
-Central touch-screen -Back processing station including high-performance Rueckenbearbeitungs lock tool -volumetric working PUR nozzle system Fh3icdd -separate page glue factory -vertical cover feeder with 2 or 4 Groove -Lift delivery with grippers -Milling dust extraction more
6
Piston compressor KAESER Premium silent 130/10 Year 2003- Serial-No. 1085 Vtwf0 -Available Immediately - -can be inspect- -on stock - can be test- more
4
Screw compressor with 2 x coupling container 30 cbm System has been dismantled, it is the pictured funnel, as well as a normal funnel available. Compressor: Kampwerth SP11 with feeder tested with new accident prevention regulations functional and ready to use Mulhl Coupling reservoir: 2 x 30cbm, year 2008 more
5
Frequency inverters, frequency converters, drive inverter, controller variable speed drive -Siemens Sinamics active line modules 6SL3130-7TE25-5AA3 -Max power 55kW Hinzeylxc Input 3AC380-480V 50/60 Hz Output DC 600V 92A 55KW -3 units available Award pieces 500/200/H270 dimensions mm Weight 16 kg more
4
Chimney, flue, chimney stainless steel tube Chimney system d = 130 mm Btokvz8e consisting of: -5 x 1 m pipe -2 x 0.5 m pipe -1 x 0.3 m pipe -diverse parts see photos more
5
Double-end edge banding machine edge trimming cutter edge cutter 2x motor 0.4 kw 20 shaft 11300 rev / min at 200 Hz motor on guides mounted motors swivel-milling cutter with indexable insert 3 x bedside tables with 2 motors available-price piece weight 60 kg / piece B3aqpr03 more
4
Double-end edge banding machine Ritz engine Zerspanermotor -3.7 kw electric motor 8580 rev / min at 300 Hz-up shaft 30 mm Weight 20 kg 3lq7u2of more
5
End-milling cutters, end mills, milling cutters, six-Schneider-finishing cutter finishing cutter diameter 32 mm usable length 130 mm corner radius 4 mm type HSSE number 12-piece is completely sold-weight 17.5 kg Qlk02o2jc more
5
Frequency inverters, frequency converters, drive-Siemens SINAMICS Active Line Module 6SL3130-7TE21-6AA3-max power 16kW 480V 50/60Hz input 3AC380-output DC 600V 27A 16KW-several converters available-price-piece dimensions 500/100/H270 mm - Weight 7 kg Qk22umew0 more
5
Bezel, co-moving, follow rest, steady rest, Lynette br / br / -max passage 130 mm br / pad cast iron br / -Lochabstand receiving 450 mm br / -Spitzenhöhe 200 mm br / -Drawings in photos br / -dimensions 450/475 / H90 mm br / weight 13 kg Vh3euaxjq more
4
Platen, welding table, welding table, Richtplatte br / br / width 1000 mm br / length 1295 mm br / height 910 mm br / -Plattendicke 28mm br / -with Bank vice mm br / transport dimensions 1450/1000 / H1100 mm br / weight 570 kg Wk0gke7zc more
4
Electrode welding machine, electrode welding transformer br / br / br -Schweissleistung to 140 A / 230 V -Operating br / -verschweissbare electrode 2 to 3.25 mm br / -dimensions 400/280 / H250 mm br / -Weight 26 kg Pbcmjho more
1
ZF gearbox 16s 130 for Mercedes, duplicated, commercial vehicle spare parts of [...] DELIVERY only for the commercial needs to our terms and conditions, price on request known plus VAT VAT for export outside the EU only as a bar deposit - all information without guarantee 2vrobfbqv more
6
Automatic buffing machine for flat panels Machine has got 2 alternating operation fields, each with vacuum suction Ekcugf9 Total table size: 1,35 x 12,00 m. The machine has got 4 spinning coton buffing units mounted on a rotor, speed adjustable 5 to 25 r/min and 4 rotating finishing discs more
1
-Trumpf TrumaBend V130 Bas3zvq2ar -Delem CNC -Y1, Y2, X, R1, Z1 & Z2 more
6
TYPE TrumaBend V130 X Year of construction 1997 Weight-12900 kg Size B L 2210 x 3640 x H 2885 mm Operating hours ca 50,000 hrs Control DA69 Pressing force 130 tons Bending length 3060 mm Usable height of 535 mm Clearance between the stands 2690 mm Throat depth 410 mm Stroke 365 mm Working height 1050 mm Facilities 2 quick adjustable support bracket front Barrqfgp2i 4-axis Backgauge, R-axis Hydraulic upper toolholders substation stuff recording for single-V matrices with hydrauli... more
6
CNC WORKING CENTRE FOR BORING ROUTING INSERTING GENERAL SPECIFICATIONS ► Industrial machine with heavy-duty structure ► Working area axes "X","Y" axes: 90 - 3000 x 70 - 1300 mm ► Max. panel thickness 8 - 90 mm SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Motorized transfer conveyor for the receiving of the panels ► Nr. 2 lateral grippers to clamp the panel BORING UNITS ► Nr. 2 boring units ( 1 top side + 1 bottom side), each one with the following specifications: ► Nr. 13 independent s... more
1
Manufacturer: Ima 5 Achs CNC Fräse, Type: Bima/Gx30/R/130/430, Year: 2013, Control: IMA Woop/Icos open, Working range X: 4300, Working range Y-axis: 1410, Working range Z: 650, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Number of tool changers: 1, Number of tools per tool-magazine: 18, Vertical drills-X: 11, Drill vertical Y: 11, 2 station allocation: 2 X 2050, Stops in the table rear: yes, Vacuum pumps m³/h: 140, Rigging support table: LED, Waste conveyor belt: JA, ... more
6
elumatec SBZ 130/01 the 3-axis bar machining center SBZ 130 steel suitable for the economical and efficient processing of aluminium, Bas7mezx0p All operations such as milling, drilling and thread-cutting take place to preserve the profile surface in stationary profile bar. For very short tool changing times and highly efficient machining cycles makes the move with turret, which can be equipped with eight tools or angle milling heads. Editing in pendant operation is possible thanks to t... more
6
Foil laminator for surfaces as well as edges (postforming) Machine can do PVC foil, paperfoil as well alu-foils PVAc glue Min/max panelwidth: 130 / 1300 mm. Min. panel-length: 600 mm Min/max panel thickness: 6 - 50 mm Foilthcikness: 0,1 to 0,6 mm Bp7dogii Foilwidth max. 1400 mm Coildiameter max. 600 mm Feed speed: 4 - 24 m/min Panel feed by 2 parallel chains, width adjustment with mech/dig read-out Foilpreparation: Coil-unwinding device Glue application with roller/nozzle Glue driying tunnel Pa... more
4
Mercedes gearbox type: G4/130 with EPS circuit bus Mojlikgo more


komatsu pw...
every day

New machines via email!

Be informed!

to

to

Change search
KOMATSU PW 130 ES
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close