Elect./Voltage: 230/460 V, 60 Cy, 3 Ph.
NIAGARA SP 1010 10 x 10’ Hydraulic ShearSpecifications -- Length of cut 10’ -- Max. cut 10 ga÷ Strokes per min 17 spm -- Motor size 3 hp -- Weight 12,000 lbs -- Capacities 10’ x 10 ga mild steel 10’ x 16 ga stainless 10’ x 3/16” aluminumEquipped with -- 40” front operated power back gauge -- 4’ squaring arm -- Support arm -- Foot pedal more
Thieme semiautomatic 1010 E 2000.
Pressure altitude: max 50 mm
Max print size 570 x 770 mm option multiple pressure
Option adjustable flood squeegee pressure
Multiple print without fill
Frame exterior: 1000 x 1100 mm
Table: 800 x 930 mm
Capacity: 900 PCs / h
Electrical / compressed air: 400/230 V / 4 A, 50 Hz / 6 bar
BZT PFU S 1010-G, incl. frame / model year 2014 / complete system
Portal milling machine with:
Clamping surface: approximately X = 1000 mm x Y = 1000 mm
Clearance height below Z axis: approx. 250 mm
Ball screws on all axes
Management system 25 mm Bosch Rexroth in all axes.
X-axis: steel beams 200 x 100 mm
X-axis: ball spindle 16 x 16 mm, Bosch, with driven nut
Y-axis as gantry version: 2 16 x 16 mm with driven nut ball screws
Y-axis: C-profile steel with 1 x 140 x 15 + 2 x 100 x 15 mm... more
Screen printing machine THIEME 1010 print size: 550 x 750 mm
parallel lifting machine with moveable table, blade path and squeegee speed infinitely electronically adjustable, good pressure: adjustable up to 20 mm, new Mac 90 control display.
Optional with Wandres cleaning device
Nominal capacity: 22000 bottles/h
Power consumption: 6,7 kW
Operation / control: Fully automatic, control coltage 24 V DC
Basic construction: Frame construction and cladding made of stainless steel
equipment: Inspection of falling bottles with light barrier (separation with inlet-puser in collecting vessel) to prevent the machine for damages, bottom inspection (camera), sealing surface inspection (camera), thread inspection (GEW/SMK2, camera with cone)S... more
sheet width 1010 mm
plate thickness 1 mm
diameter of upper rolls 50 mm
diameter of lower rolls 55 mm
weight of the machine ca. 155 kg
dimensions of the machine ca. 1,6 x 0,4 x 0,4 m
Manual bending machine with asymmetric roller arrangement, swing-out
Top roller, conical bending by tilting the back roller and
Longitudinal grooves. The sheet thickness refers to a strength of the
Sheets of 380 N / mm².
Machine dealer with own stock of 2500 m² and certification of the d... more
Crane, crane, electric wire rope hoist, hoist, winch motor, motor winch, tackle, draughts, pulley
Nominal load 1000 kg
Hoisting speeds 1/6.3 m / min
-Hubhöhe 3 m
Dimensions 1100/900/H600 mm
Weight 370 kg
Semi-Automatic Screen Printing Machine THIEME 1010
Parallel lifting machine with movable printing table, for printing of rigid or flexible materials, with retractable and extendable printing table, squeegee stroke and squeegee speed infinitely electronically adjustable, height of printing objects: adjustable up to 20mm, with analogue control panel, printing size: 500x 750mm, screen frame size: max. 1000x1100mm, outer dimension of printing table: 800x1100mm, vacuum area: 525x735mm, 400V, 50Hz, co... more
Control range: 7000 - 35000 Bottles/h
Niominal capacity: 20000 Bottles/h
Power consumption: 30.5 kVA
formats: adjusted for VDF 1,0 l bottles (D=89,5 mm, H=306,5 mm) and NRW 0,5 l bottles with screw cap (D=67,5 mm, H=260,0 mm)
Machine pitch: 113 mm
Operation / control: bottle monitoring Krones with control KFS-3, control voltage 24 V DC
equipment: incl. buffer tank (866 l), brix meter, 100 filling stations, 15 closer heads
The Krones filler VP-I is design... more
Jack Bock, stand, steel bracket, welding table, bench, parking stands, parking feet, work Bock, aluminium trestle
-Komplett aluminium square profile
Run 1010 x 100 mm
Height 815 mm-with wood covering
Capacity 3.000 kg distributed load
-10 x Jack stands available
1110/540/H815 dimensions mm
Weight 24 kg / piece
We sell a CNC Portal milling machine due to operating resolution.
Clamping table surface: 1530x1030mm
X + Y-axle is powered with precision rack and pinion
Z axle is powered with ball screws.
Industrial control by Backeberg is installed.
HiWin tours, sleigh and co.
CAM software: CNC count 7.0 Pro.
HF spindle: HSD MT1090-100 with 4,5Kw. Air cooled. Up to 24,000 rpm ER-32 record.
Built in March/2017 - warranty is available!
Hours of operation: 70... more
Motor round cylinder serial. HM type RHA 10/1.5
Masch.# 96030 built in 1996
Working length-1010 mm
maximum sheet thickness 1,5 mm
Roll diameter 60 / 65 mm
Weight approx. 140 kg
External dimensions approx. 1750 x 700 x 1400 mm
-stepless speed adjustment
-Footswitch for R + L-run
The electric, infinitely variable drive has been professionally grown self-made.
Steel framed Logistics Warehouse with a covered floor area of round about 10200 square meters, that will be deconstructed/ disassembled in April/ Mai of 2018.
Width: approx.. 100.00 meters (20.0 meters x 5); |
Length: approx. 102.00 meters; |
Covered floor area: approx. 10200 square meters; |
Eaves hight: ..... 9.00 meters; |
Ridge hight: ..... 10.40 meters; |
STRUCTURAL STEEL WORK:
Primary structure made of hot-dip galvanised hot rolled euro prof... more
Forks: 1150 mm
Carriage: 572 mm
Load capacity: 2000 kg
Comment: Gabelausf? currency, 572 / 1150 mm, rear wheel: polyurethane load wheels: tandem poly, hand pallet truck with scale 1 kg steps, tare function, Summenz? narration of weights, accuracy +/-0.1%
Kronen line for cutting, washing and drying vegetables, fruits, mushrooms and herbs
The Kronen high-perfomance line suitable for accurate and gentle proceesing with vegetables and fruits.
The line complete with next equipment:
1. Washing machine GEWA 3800
2. Spin-dryer K50-7S
3. Kronen KUJ Cube, strip & slice cutting machine (Dicer)
4. Universal peeler HSM-U more
1977 - Ueberholt (Refurbished) 2017
Nominal capacity: 8,000 b/h
Type of packages: 0,50l Euro + 0,33l Steini
Working direction: right - left (Clockwise)
Steini bottle 0,33l = B80 x H60mm
Euro bottle 0,50l = B97 x H74mm
Steini bottle 0,33l = No label
Euro bottle 0,50l = B75 x 60 x H35mm
For more details ask us
2200mm infeed conveyor. The GS 10 is equipped with a 125 mm wide conveyor belt with perfect hold-down technique for the proper guidance and gentle product. The slices can be infinitely adjusted from 1-50 mm. 1.8kw, 230V
Plate shears, sheet metal shears, sheet metal shear
pneumatic plate shear
Cutting width 1010 mm
-maximum cutting thickness 2.25 mm
Operating pressure 8 bar
-with back gauge up to 750 mm
Transport dimension 1270/1865/H1150 mm
Weight 446 kg
Rear disc mower for the three-point hitch
Working width 2,830 mm
PTO speed 540 rpm, clockwise, freewheel
Direction of rotation 'A' (all discs rotate to the middle)
Five discs, two cutting drums
Two blades per disc/drum
Working power approx. 2.5 - 3 ha / h
Power consumption approx. 40 kW (55 HP
Weight approximately 605 kg
Required hydraulic connections: 1 x EW
Adjustable lower arm pins cat. I + II
Adapted to the increasing... more
capacity: 71500 Fl/h
Power consumption: 8.5 kW
weight: 4800 kg
formats: bottle height: 120-340 mm, crate dimension(LxBxH): min. 200x140x100 mm, max. 600x460x380 mm
Operation / control: Siemens S5
equipment: type bottle gripper heads: draggable, type tulips: TR 58, 8 gripper heads,
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.