Krone turbo 5000 buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
3

Chips center KNOLL SF5000/Turbo6/KF

F- CONTAMINE SUR ARVE, FranceFrance dealership location
6598 km
2008
used
TECHNICAL DETAILS, Dimensions (w/d/h) : 5200 x 5000 x 3400 [mm], Equipment for cutting oil treatment, Flow : 750 [l/min], Volume : 5000 [l], Number of filter units : 6 (filtration 35μm), Pressure (bar) / Flow rate (l/min) / Filtration degree (μm), * High pressure pump x2 : 60/55/20, * Low pressure pump x2 : 12/310/35, * Low pressure pump x2 : 1/50/35, Plate heat exchanger NT50M CFS-16 (cooling power 90kW), Magnetic roller MW235GR Basibcszc2 more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbuzob0hp9 BARR-MULLIN TURBO WONDER Optimizing Saw;2" x 8" Cap., 24" min. length, up cut design. -- Equipped with: 7-1/2 HP - 1,740 RPM Main motor, 20" blade cap., 1" arbor, 4,660 RPM blade. -- DC Servo drive with (12) knurled steel feed rolls, variable feed speed 0 - 600 FPM, belt infeed, spring loaded press rolls, lower driven outfeed [...] Features: -- Top sensing camera for cut for value, cut for yield, cut for ratio, and cut for finger joint block... more

CNC Bed-type Miller ZAYER 30 KMU 5000

Engelskirchen, GermanyGermany
6439 km
1998
excellent (used)
X - axis 3400 mm Y - axis 1250 mm Z - axis 2000 mm A - axis 45 /0,001° C - axis 45 / 0,001° Dyg8ttd B - axis 360 / 0,001° W - axis 500 mm spindle taper 50 SK spindle speed range II 35 - 3000 rpm spindle drive 37 KW rapid travel X - Z 10 / 15 m/min X feeding power 2940 daN Y feeding power 1590 daN Z feeding power 1100 daN no. of tool positions in magazin 60 table surface 4700 x 1200 mm max. table load 20.000 KG CNC HEIDENHAIN 430 PA NC-m... more
1

barfeeder FMB turbo 3-26

Karlsbad, GermanyGermany
6611 km
2001
good (used)
Weight was attached to STAR: 800 kg Cj9tpwmy more
2

Special Edition Car baler Lollini A5000 HS

Egyesült KirályságUnited Kingdom
5599 km
2007
good condition (used)
Manufacturer: Lollini Model: AL5000 HS Mobile Year of Manufacture: 2007 Axial Thrust: 160 t (on each of the two opposing cylinders) Minimum Bale Dimensions: 1000 x 600 x 200 mm (7 inch minimum variable) Idle Cycle Time: 55 seconds (50s with automatic cycle) Working Pressure: 220 bar (maximum axial cylinder 260bar) Piston Pumps: 226cc (2off) Diesel Engine: 6-cylinder (200hp) Iveco water cooled with PLC control and electronic check up Opened Charging Box: 5000 x ... more
1
Elect./Voltage: Bbuxjz39e0 MORI SEIKI "NV5000B/50" VERTICAL MACHINING CENTER -- Table Size: 52" x 23.6" -- Max. Table Capacity: 2,6540 lbs. -- X-Axis Travel: 40.20" -- Y-Axis Travel: 20.1" -- Z-Axis Travel: 20.1" -- Rapid Traverse: 1,653 IPM -- Cutting Feed Rate: 1,653 IPM -- Spindle Nose to Table: 5.9" - 26" -- Spindle Taper: 50 -- Spindle Speed: 8,000 RPM -- Spindle Motor: 40 HP -- Tool Changer Stations: 30 -- Machine Weight: 14,500 [...] with: -- MS... more
1
screw size:55 mm injection shot weight in Polysterol:476 g clamping force:1500 kN : INJECTION UNIT: screw size:55 mm max. swept volumne:523 cm³ injection shot weight in Polysterol:476 g/PS injection pressure:1.904 bar : CLAMPING UNIT: clamping force:150 t tie bar distance:500 x 500 mm mould hight min.:300 mm opening stroke:900 mm : CONTROL: microprocessor control:MC4 screen text:deutsch / german Manual:deutsch / german : EQUIPMENT: robot interface:Euromap 12 core pull:2 x : OTHER ... more


krone turb...
daily

New machines via email!

Stay updated!
1
Technical Data item number:: LM-1662 Manufacturer:: TRUMPF Type:: TruLaser Tube 5000 Year:: 2007 Working area:: 6500 x 150 mm Laser rated output:: 2700 Watt Control:: Siemens Sinumerik 840 D Working hour:: 53.700 h / 8.354 h Max. wall thickness:: 6,4 mm Max. tube length:: 6500 mm Min. tube length:: 3000 mm (charg. aut.) Max. tube diameter:: 150 mm Min. tube diameter:: 15 mm Max. length finished part:: 2000 mm Max. tube weight:: m Max. ... more
2
Milling / boring machine to bench fixed RIVOLTA FBF 5000 Year 1989 CN ECS 2301 renewed maintenance contract X: 5000 Y: Z 1500: 900 (Aries) 2q3fme Equipped with coolant pump high pressure through fingers of indexing very good condition more
13

TRUMPF TruPunch 5000 R (S12)

Günzburg, GermanyGermany
6749 km
2016
excellent (used)
Bcz2xvgzer more
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. 2q7bwm HAPFO AP-5000-NC-3100 Hydraulic Copy Lathe with NC(PLC) Control and Spiral/Twist attachment. Capacity: 3,100 mm (122") Max. between centers, 118" standard max. copy length, 9.8" (250 mm) max. height of centers, max. copying dia. 10-1/4" (260 mm) longitudinal and 19-5/8" (500 mm) transversal. Equipped with: -- Hydraulic Copier with 6" (150 mm) tracing stroke. -- Spindle/carriage drive: 5.5 HP (4 KW) spindle drive motor, electronic variable spind... more
5
screw size:115 mm injection shot weight in Polysterol:5858 g clamping force:20000 kN : INJECTION UNIT: screw size:115 mm max. swept volumne:6.232 cm³ injection shot weight in Polysterol:5.858 g/PS 2sv223o7n injection pressure:2.205 bar CLAMPING UNIT: closing pressure:2.000 t tie bar distance:1.900 x 1.500 mm mould hight - min.:1.000 mm mould hight - max.:1.700 mm opening stroke:2.600 mm CONTROL: microprocessor control:Polaris screen text:deutsch / german Manual:deutsch / german EQUIPMEN... more
4

Rotary Table - Boring INNSE 5000 x 5000

Monheim, GermanyGermany dealership location
6405 km
used
table length 5000 mm table width 5000 mm table load 250 t total power requirement - kW weight of the machine ca. - t dimensions of the machine ca. - m K29x9d3v CNC controlled rotary Table more
2
Milling / boring machine to amount mobile RIVOLTA MEF 1000 Year 1983 CN ECS 2101 (contract renewed maintenance) X: 5000 Y: 1500 Z: 1000 (Aries) Equipped with coolant pump high pressure through fingers of indexing very good condition Bbmcqikvqb more
9

RÖSLER Z 500 TURBO-Floc

Günzburg, GermanyGermany
6749 km
1998
good (used)
Bcz2aw3h8e more
1
Elect./Voltage: Ikh02kn HAPFO AP-5000/HYDRO Hydraulic Copy Lathe. -- Specifications: 62-3/4" Max. chucking cap., 59" copy length and 9-3/4" max. turning dia.; (1) 2.3/1.75 HP two-speed spindle motor, 0.5 HP DC motor feed drive for carriage. Feed electronic infinitely variable 0 - 11.5 FPM; (1) innovative hydraulic tracing device with 6" stroke and only 2-3/8 ounce pressure, center height 9-27/32". -- Includes: (1) HSS Copy lathe tool, original sample tracing device, dust collection hood, r... more
1
screw size:60 mm injection shot weight in Polysterol:690 g clamping force:3500 kN : INJECTION UNIT: screw size:60 mm max. swept volumne:763 cm³ injection shot weight in Polysterol:690 g/PS injection pressure:1.905 bar CLAMPING UNIT: clamping force:350 t tie bar distance:710 x 630 mm mould hight min.:330 mm mould hight - max.:710 mm opening stroke:675 mm CONTROL: microprocessor control:NC4 screen text:deutsch Manual:deutsch / german EQUIPMENT: robot interface:ja / yes core pull:4 x OTHE... more
4

Welding positioner 50t Sartore PTA 50000

Kreuztal, GermanyGermany dealership location
6482 km
2016
excellent (used)
50t welding positioner 3f7m0mg8z faceplate: 2.700mm turning speed: 0,015-0,3rpm max load 50t at 800mm cog more
2
screw size unbkt. mm injection shot weight in Polysterol unbkt. g/PS Vrpwom closing pressure 1750 kN total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6

LOTZE 327-5000 mm x1500 kN

Günzburg, GermanyGermany
6749 km
1986
good (used)
Hqes0mnhg more
1
Elect./Voltage: 400/440V, 50/60 Cy, 3 Ph Ncb0l 3,100 mm (122") Max. between centers, 118" standard max. copy length, 9.8" (250 mm) max. height of centers, max. copying dia. of 10-1/4" (260 mm) longitudinal and 19-5/8" (500 mm) transversal. -- 6" (150 mm) Hydraulic tracing stroke. 5.5 HP (4 kW) drive motor, electronic variable spindle rotation speeds from 300 - 3,200 RPM, carriage speed infinitely variable feed by DC drive 0 - 15.5 FPM. -- Spindle Shaft: Double, precision, sealed ball beari... more
1
screw size:40 mm injection shot weight in Polysterol:185 g clamping force:1250 kN : INJECTION UNIT:--- screw size:40 mm max. swept volumne:204 cm³ injection shot weight in Polysterol:185 g/PS injection pressure:1.860 bar : CLAMPING UNIT:--- clamping force:125 t tie bar distance:470 x 470 mm mould hight min.:300 mm opening stroke:600 mm : CONTROL: Bb7lkkmqg9 microprocessor control:MC 3F screen text:deutsch / german Manual:deutsch / german : EQUIPMENT: robot interface:Ja core pull:2 x... more
5

Cylindrical Grinding Machine KOLB R6/5000

Stockstadt, GermanyGermany dealership location
6564 km
used
grinding diameter:630 mm grinding length:5000 mm centre height:315 mm grinding wheel diameter x bore x width:750x80x305 mm grinding wheel peripheral speeds::35 m/sec grinding wheel speeds:500-1100 U/min max. workpiece weight:3000 kg weight of the machine ca.:17900 kg machine length:im Betrieb: ca. 15m Ba8evjkgyb more
5
screw size unbkt. mm 3zirwvlqk injection shot weight in Polysterol unbkt. g/PS closing pressure 380 kN total power requirement kW weight of the machine ca. 17000 t dimensions of the machine ca. m more
5
Sold in Working Order 9700,- Euro Gy2w7s9t0 Buy it now prices include UK Delivery. Location Nuneaton Warwickshire. Delivery EU from £350 dependent upon location. more
12

Centre Lathes WOHLENBERG V1000 1000mm x 5000mm Straight Bed Lathe

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 1222 Height of centres 500mm Between centres 5000mm Swing over bed 1000mm Swing over cross slide 700mm Spindle speeds 4.5 - 900 rpm Spindle bore 95mm Tail Stock No 6 Morse Taper Bed type Double Vee Input 400/3/50 ac 30 kW Pitch of lead screw 12mm 4 jaw chuck 1000mm Tool post 4 Way Dials Metric Digital read out Newall 2 Axis Equipment Fixed Steady & Power Feed to Topslide Tjnr9lmx Length 26' / 7.93m Width 6'10" / 2.08m Height 6' / 1.83m more
1
screw size:80 mm injection shot weight in Polysterol:1.539 g clamping force:7750 kN : INJECTION UNIT: screw size:80 mm max. swept volumne:1.818 cm³ injection shot weight in Polysterol:1.539 g/PS injection pressure:1.900 bar : CLAMPING UNIT: closing pressure:775 t tie bar distance:1.150 x 950 mm mould hight - min.:600 mm opening stroke:1.320 mm : CONTROL: microprocessor control:B&R, IQT44 screen text:deutsch / englisch Manual:deutsch / german : EQUIPMENT: robot interface:Euromap 12 co... more
3

Heavy Duty Lathe NILES DP4000 DP5000

Willich, GermanyGermany dealership location
6368 km
used
turning diameter over bed 4000 mm turning diameter over slide rest . mm turning length 5000 mm total power requirement 30 kW weight of the machine ca. . t dimensions of the machine ca. . m Bbog2ybefn more
3
screw size unbkt. mm injection shot weight in Polysterol unbkt. g/PS Mmhcl closing pressure 1800 kN total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
3

Plasma Cutting Device SATRONIK D 5000

Mülheim.an der Ruhr, GermanyGermany dealership location
6388 km
2010
used
cutting range for steel to - mm capacity at 100% - mm 8ltf2gh3w cutting medium - more
5

Folders RAS 62.30 Turbobend RAS 62.30 Turbobend

Birmingham , United KingdomUnited Kingdom dealership location
5784 km
ready for operation (used)
Used RAS 62.30 Turbobend CNC Folder Year 2014 Fzza8sh Sheet thickness 2mm, Working length 3,200mm back gauge depth 6 – 1,550mm, back gauge accuracy +/- 0.15mm, accessories more
3

MIRODUR SPA TURBOMILL 50HP

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
Bczo0agyjf more
4

Floor type Anayak ANAYAK HVM-5000-PHS - 2002HVM-5000-PHS

Burgos, SpainSpain dealership location
6043 km
2002
ready for operation (used)
Retrofitted: 2018 Numerical control: FANUC 21iM Technical features B0h8mixo Dimensions Table dimensions: 5.000 x 1.000 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4.300 mm Y axis traverse: 1.200 mm Z axis traverse: 1.500 mm Milling head Head type: Universal... more
1
screw size 115 mm injection shot weight in Polysterol unbkt. g/PS closing pressure 660 kN volumn 4255 volt V total power requirement kW weight of the machine ca. t Ovggykg dimensions of the machine ca. m more
3
Juice machine juice press Crown kitchen appliances Bb9d832znb Citrocasa fantastic Device from 2014 more
7

BATTAGGION ME-5000

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
Bczp8cfba8 more
7

Bed type Zayer Milling machine ZAYER KF 5000 - 40142 KF 5000

Burgos, SpainSpain dealership location
6043 km
1990
ready for operation (used)
Retrofitted: 2018 Bcid0zuek9 Numerical control: HEIDENHAIN TNC-355 Technical features Dimensions Table dimensions: 5000 x 1000 mm Number of slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4700 mm Y axis traverse: 1000 mm Z axis traverse: 1200 mm Milling head Head type: Univer... more
1
screw size 84 mm injection shot weight in Polysterol unbkt. g/PS closing pressure 440 kN volumn 1660 volt V Bagxqtfc0k total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6
Portal Milling Machine Norma model Multinorma 5000 Strokes : X 7000 ; Y 1500 ; Z 500, between column : 2250 mm Indexable angle head 2.5 deg, spindle : 19/24 KW 9of8snq CNC NUM 750 / YOM 1989 ATC 32 tools ISO 50 Machine mechanically in very good condition, CNC still operational but advisable to be modernized more
1
screw size:35 mm injection shot weight in Polysterol:142 g clamping force:1100 kN : INJECTION UNIT: Yfbq9fo7 screw size:35 mm max. swept volumne:156 cm³ injection shot weight in Polysterol:142 g/PS injection pressure:2.159 bar : CLAMPING UNIT: clamping force:110 t tie bar distance:470 x 470 mm mould hight min.:300 mm opening stroke:600 mm center hole:125/175 mm : CONTROL: microprocessor control:MC 3F screen text:deutsch Manual:deutsch : EQUIPMENT: robot interface:Euromap 12 core pul... more


krone turb...
daily

New machines via email!

Stay updated!

to

to

Edit search
KRONE TURBO 5000
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close