Kubota svl 75 buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
for droop & rein FA750 T: circuit diagram, wiring diagram, electrical parts list available - more on request 7ao88n more
5
tube diameter 75,0 mm wall strength 2,0 mm Zr2anvoh bending radius min. 0 - 180 Grad bending radius max. 350 mm arbor bending device 6.000 mm total power requirement 4,0 kW weight of the machine ca. 1.694 kg more
2
internal diameter:150 mm grinding depth:300 mm swing diameter:360 mm centre height:180 mm grinding head swivelling:180 Grad grinding head quick motion:200 mm table feed:0,1 - 7 m/min total power requirement:8 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:3 x 1,8 x 1,6 m 08kb0hycj with face grinding attachment with internal grinding attachment coolant attachment more
5
Installation on pumps, compressors, valves and equipment for noise attenuation and absorption of small oscillations. -Dimension DN 175 width 90 mm Weight 15 kg 3xlnken2 more
3
Bosch SM 10/20-TC1 servo module 1070075974-104, serial number according to the photo, used, normal wear, 100% functional, included with com. photos 9fe8vt7uw more
6
Manufacturer Bollegraaf Typ AS-75/850 Year of construction 1996 Driving motor 75 kW Width feed channel 850 mm Screen size 60 x 60 mm Transport dimensions only baler approx. 2.760 x 2.040 x 2.565 mm (w x d x h) Machine weight baler 7,5 to Y7atrls Comments: The shredder will sold without a control cabinet. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. more
5
1 used cold saws, circular saw Kaltenbach HDM 750 Saw blade diameter: 750 mm (max. 800 mm) Cutting range 90 °: around 230 mm (250 mm) Square: 200 mm (220 mm) I-beams: 450 x 170 mm (500 x 185 mm) Wide flange I-beam: 220 x 220 mm (500 x 300 mm) Cutting speed: 9/18 m / min Preschool speed: 0-900 mm / min stepless Power consumption: 8.5 HP Dimensions approx. 1050 x 1900 x 1560 mm (max. 1810 mm) Weight: CA. 2,5 tons Accessories: Bundle Vice, hydraulic Coolant system S... more
4
saw blade diameter 275 mm cutting diameter 95 mm Wvvnhbroe capacity 90 degrees: flat 120 x 50 mm weight 450 kg range L-W-H 0,8 x 1,2 x 1,4 m more
6
x-travel 16000 mm y-travel 5000 mm z-travel 2450 mm w-travel 400 mm table: 2 x 7500 x 3000 double table 15.700 x 3000 mm table load 150 t max. passage 3250 mm diameter of quill 320 mm spindle turning speed range 6-200, 200-600 U/min transmission ratio 2 drive capacity - spindle motor 95 kW spindle taper ISO 60 electrics - voltage/frequency 380/50 V/Hz Control Siemens 840 D SL weight of the machine ca. 260 t dimensions of the machine ca. 34000 x 10000 x 6000 m angular milling head 10x Ret... more
4
Quill type machining unit, Drilling, drill, drill press, multi-spindle drilling machine, line boring machine, Drilling machine br / br / -max feed stroke mm br / -drive 0.33 kw br / -Speed ​​2680 U / min br / recording chuck br / -Built collet mm br / -2x drill heads available br / prize piece br / -dimensions 665/180 / H230 mm br / -weight 12.1 kg / piece Yqjlezzax more


kubota svl...
every day

New machines via email!

Be informed!
2
Bosch SM 10/20-TC1 servo module 1070075974-104, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Mzxqz more
5
Maximum punching force: 750 kN Stroke release via foot switch V9q3s With range of tool's desire more
6
Parent band magnet, Magnetic power: approx. 3.6 kW, Magnetic block sizes (length x width x height): 1200 x 750 x 400 mm, Belt width: 850 mm, Gear motor SEW, Control cabinet with transformer / rectifier circuit for magnetic and belt separate, wired and ready for use Ptkqca more
1
grinding diameter 90 mm Qnu3esrzq grinding length 1000 mm clamping length 1200 mm voltage 380 V total power requirement 6 kW weight of the machine ca. 3,8 t dimensions of the machine ca. m Special price. Machine not in working condition. more
1
Cylindrical grinding machine Fabr.CINCINATI type: R-75 M8k2z Schleifdm.Max: 260mm Schleiflaenge.Max. 750mm. more
3
Bosch SM 10/20-TC1 servo module 1070075974-104, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Hubzt7a7 more
2
pressure 175 t chamfer lenght 3050 mm distance between columns 2550 mm control MNC 85000 E272wst stroke of upper beam 250 mm distance beam - table max. 500 mm throat 300 mm table width 180 mm feed down 100 mm/sec feed up 79,8 mm/sec working feed 12,1 mm/sec tank capacity 260 l engine output 22 kW weight of the machine ca. 14,0 t range L-W-H 5,30 x 2,02 x 3,55 m acc.: upper and lower dies, rear stop more
6
Manufacturer Bollegraaf Typ HBC 100 Year of construction 2007 Working hours 29.272 h Press power main press 100 to Press power of pre-press 50 to Feed channel 1.600 x 1.100 mm (l x w) Capacity per cycle time 3,15 cbm Theoretic cycle time 19 sec. Bale size 1.100 x 720 mm (w x h) length adjustable Driving motor 75 kW Tying system 5-fold vertical, 3-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 16 to/h Fj3o9xgxy bulk weight of 50 kg/cbm approx. 25 to/h bu... more
5
internal diameter unbkt. mm grinding depth unbkt. mm swing diameter unbtk. mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Yv2ijhkbw more
2
floor-plate length: 2750 mm plate width: 1500 mm plate height: 100 mm weight: 2,7 t space requirements of the machine approx.: 2,75x1,5x0,1 m incl. 6 pcs. adjusting screws and covers T-slot according DIN a=28mm h=49mm Wau7w b=50mm c=21mm distance to slots to each other = 1300mm more
5
Three-phase motor electric motor motor: Power: 75 KW Speed: 2970 1/min Voltage: 380-420 V (delta-star) Protection class: IP54 Construction: B3-B5 shaft: 65 mm further data see photo nameplate weight 610 kg Qlwv8gpq0 more
3
Bosch SM 10/20-TC1 servo module 1070075974-103, serial number according to the photo, used, normal wear, 100% functional 9ffek0irj more
4
Color sorting of plastic granules, flakes, or metals with regard to fines. Unmixed and without impurities urgency secondary raw materials is a complex task. On the way to a high-quality reuse, even the smallest sizes must be reliably separated according to types and colors. The UniSort P750 Flake is ideal for your pure fine color sorting in the field of plastic, metal or mineral sorting. Key figures: Throughput per module: approx. 0.4 2 t / h, depending on the sorting of goods Separat... more
3
maximum flow rate 750 litres maximum quantity 580 l Motor power 4 kW 15 bar 2 cyl. Tank 250 liters Vsaspu more
2
stroke of plunger rod 750 mm performance at 240 bar - approx. 25 to diameter of plunger rod 60 mm lead-through of oil through plunger rod with load holding valve diameter of piston 115 mm diameter of cylinder eyes (pin diameter) 45 mm Yxcga0guk total length middle of the pin retracted - 1,070 mm extended - 1,820 mm *- new - * - ORIGINAL ATLAS - original price ATLAS ? 2,679.60 more
3
turning diameter 220 mm turning length 250 mm control SIEMENS SINUMERIK 820 T swing diameter 380 mm chucking diameter 250 mm x-travel 200 mm z-travel 250 mm spindle turning speed range bis 4000 U/min rapid travel - longitudinal/face 15 m/min total power requirement 27,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,2 x 2,9 x 2,2 m Ey8p8kj acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant more
5
Three-phase motor electric motor motor: Power: 75 KW Speed: 2955 1/min Voltage: 400-690 V (delta-star) Protection class: IP23 Construction: B3-B5 shaft: 60 mm further data see photo nameplate weight 398 kg Qkugvfufe more
4
FANUC A06B-0372-B175 AC servo motor, pitch of holes: 71 x 71 mm, Ø shaft: 10-11 mm (cone-shaped), used, very good condition, 100% functional Silsfarz more
3
pressure 27,5 t round bar steel 28,0 mm square edge steel 25,0 mm output 20 in 10 mm L-beam 65 mm throat 90 mm flat steel 140 x 8 mm S3gz7x blade length 175 mm work height max. 887 mm engine output 1,5 kW weight 280 kg more
6
We offer: from liquidations and inventory levels Electric motors gear motors fan actuator steering Motors Motors emergency generators as follows: All contributions are gross contributions. Siemens electric motor 1 LA5130-4CA70 380/660 V 5.5 kW 1450 1/min Price: €250 VB. Heat exchanger air heater fan heater GEA Happel 87 kW 9840 m³/h Price: €449 VB. Emergency generator 270 kVA in the Cont. 772 bra motor MB Reperaturbed... €11,800 VB. Gear motor GARGATE 105 W WK1777504 wi... more
1
Instructions for drilling work Scharmann WB75 and WB80, as well as more available on request Qr33h7ys more
5
Injection moulding machine ARBURG 320 M 750 – 210 Machine data: Year of construction: 1990 Hours of operation: approx. 78.300 Cylinder/snail Ø: 30 mm high wear strength 2 core cable with core it's control to delay of the screw-in signal when screwing the threaded cores. 2015 was performed the last audit of the hydraulic lines and hoses still replaced. The machine is still fully functional and is still daily in use. Machine is sold as second-hand machine with traces of use, without guaran... more
5
Oil Purifier, Oil purification plant, Ölumfüllanlage, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic testing pump br / br / -Magnet and edge filter br / -for hydraulic and other oils br / -Electric control br / -dimensions 900/570 / H1100 mm br / - weight 82 kg Srzdqk more
3
Bosch SM 10/20-TC1 servo module 1070075974-104, serial number according to the photo, used, normal wear, 100% functional, included with com. photos D3blmnsu8 more
6
max. ram stroke 1500 mm E7c87cyrw throat 1100 mm table diameter 1250 mm height between table -ram 1100 mm table hole 130 mm longitudinal adjustment of table 1580 cross adjustment of table 1050 mm cutting capacity 3500 kg weight of the machine ca. 17,5 t dimensions of the machine ca. 4,3x3,2x4,9 m more
5
Capacity: 3000x900x750 mm Year of construction: 1997 WORKING CAPACITY Longitudinal (x): 3000 mm Vertical (y): 900 mm Cross ram (z): 750 mm CNC Cnc: ECS 2600 SPINDLE Rotating speed: 3000 Rpm Taper: ISO50 Basjzwsgaz ATC Positions: 40 Position: a catena TABLE 1 Surface: 3000x1100 mm HEAD 1 Type: Automatica Orizzontale/Verticale Spindle taper: ISO50 A axis: 2x180 ° Max speed: 3000 Rpm Housing: frontale Chip conveyor: si Availability: pronta more
2
027586-207401 inductosyn drive amplifyer board/card BOSCH Micro 8 / S5 Bi8sqs8 more
3
2014 Heidelberg Speedmaster XL 75-5 (C) (Ref.: 1000744) Year: 2014 Fgh8xbzy0 Sheet Counter: 45 Mio. Colours: 5 Format: 53 x 75 cm Equipment Water cooled peripherals, DryStar LE UV - Low Energy UV dryer (IST), Alcolor continuous dampening, Autoplate (semi automatic plate loader), HydroStar (dampening solution supply), Prinect Inpress Control, Remote register: lateral, vertical & diagonal, Impression-cylinder washing device - automatic, Ink-roller washing device - automatic, Blanket washing dev... more
2
Rubber rollers 300 mm-750 mm wide conveyor roller recording 15 mm -13 roles available-piece price Hhv8gwjhc more
3
Bosch SM 10/20-TC1 servo module 1070075974-104, serial number according to the photo, used, normal wear, 100% functional, included with com. photos 9fe9iwi3y more
2
screw size unbkt. mm injection shot weight in Polysterol unbkt. g/PS closing pressure 1750 kN total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Vrpwom more
3
nominal heating capacity 87KW air volume flo0w 5,200m³/h oil burner MAN fuel consumption 8.4kg/h Yxdl29rej electrical data 380V / space requirements height - 1,400 x width - 800 x depth - 1,250 mm weight approx. 320 kg more
5
max. wheel diameter 275 mm Djjwykr gear width 58 mm max. module min. module control SIEMENS 840D number of teeth 5 - 200 ratio of transmission 10:1 cutter diameter max. 228 mm x-axis 25-350 mm y-axis +/- 175 mm z-axis 125-600 mm b-axis -5 / +90 ° total power requirement kW weight of the machine ca. 10 t dimensions of the machine ca. m - dry-cutting machine - CNC control SIEMENS 840D more
2
table length 750 mm table width 200 mm workpiece weight t no. of flutes 1 Stück groove width 26 mm flute distance - table height 250 mm 3jsr8t7x7 weight of the machine ca. 0,12 x 2 t more
5
Manual adjuster slack adjuster slack adjuster, brake slack adjuster, Bremsnachsteller-5 piece place prize piece dimensions 310/160/H50 mm weight 3.6 kg / piece 03md83tkp more
3
Bosch SM 10/20-TC1 servo module 1070075974-103, serial number according to the photo, used, normal wear, 100% functional Huhylnrr more
5
x-travel:885 mm y-travel:600 mm z-travel:600 mm table surface area:D 750 mm control:iTNC 530 HEIDENHAIN SMART NC turning speeds:28000 1/min tool change unit:30 Pos. tool taper:HSK A 63 M3lgt rapid traverse:90 m/min table load:800 kg spindle:55 / 43,5 kW total power requirement:73 kVA weight of the machine ca.:10,2 t dimensions of the machine ca.:4,6 x 2,5 x 3 m 5-axis machining center with controlled head -10 to +110° 3D-touch probe M&H 25.10,, internal coolant supply 40bar, 900l, BLUM Laser... more
1
GznouemrInstallation 04/2013 4-Color-System Speed: 75 ppm. Resolution: 2400 x 2.400 Interface/Controller: Free Flow Additions: light production finisher more


kubota svl...
every day

New machines via email!

Be informed!

to

to

Change search
KUBOTA SVL 75
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close