Lamborghini r 603 buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Ck0mse9c SHARP SV-6030 CNC Vertical Machining CenterSpecifications: -- X-Axis Travel 59"" 1500mm -- Y-Axis Travel 29.9"" 760mm -- Z-Axis Travel 27"" 680mm -- Spindle Speed 10,000 Rpm -- Spindle Motor 15/20 Hp -- Spindle Drive Direct Drive -- Spindle Torque 75 Ft-Lb 1400 Rpm -- Spindle Taper Cat40 -- Tool Magazine Capacity 32 Atc Side Mount -- Maximum Tool Diameter/Weight 3.9 / 15 Lbs -- Rapid Traverse Rates 787 Ipm -- Table Size 69.3"" X 27.6"" ... more
5
Liniarantrieb, linear geared, hub gears, spindle drive -ungebraucht of bearing resolution Manufacturers rose + Krieger Type 6000060344016 Travel in 1295 mm Wuy0jhzwg Dimensions 1655/155/H95 mm Weight 19 kg more
1
TECHNICAL DETAILS, Machine on base, motor speed : 2 700 [rpm], grinding diameter : 6-30 [mm], grinding angle : 8° - 12°, machine dimensions : 500 x 600 x 1 115 [mm], motor : 380 [v], EQUIPMENT, cover, cooling with tank, maintenance manual. Cj37m3c9 more
6
x-travel 6000 mm y-travel 3000 mm z-travel 230 mm Capacity 3600 bar Q0nrm7fuy workpiece width - max. 200 mm table load 28 t feed 84 m/min Table 6000x300 mm control By Vision total power requirement kW weight of the machine ca. 16,7 t dimensions of the machine ca. m 2 heads NO: 359 W treatment plant more
4
Manufacturer article no.: 0031-015052 Machining: milling / drilling Wedys Cone: SK 40 RPM: 12000 Rotary feedthrough: Yes Lubrication: Grease Internal cooling: Yes more
1
Elect./Voltage: L8ssr FADAL 6030HT Vertical CNC Machining CenterSpecifications: -- CNC Control Fadal 88HS -- Table Size 62.5"" X 30"" -- Table Capacity 4,120 Lbs -- Travels:X Axis 60""Y Axis 30""Z Axis 30"" -- Rapid Traverse (X,Y,Z) 400 IPM -- Spindle Nose to Table 5.5"" TO 35.5"" -- Spindle Speed 10 - 10,000 RPM -- Spindle Taper 40 -- ATC, Number of Tools 21 -- Spindle Drive Motor 22.5 HPEquipped With: -- Flood Coolant -- 88HS ControlFADAL 6030HT Vertical CNC Machining Center more
2
TECHNICAL DETAILS, Machine on base, motor speed : 2 700 [rpm], grinding diameter : 6-30 [mm], grinding angle : 8° - 12°, machine dimensions : 500 x 600 x 1 115 [mm], motor: 380 [v], EQUIPMENT, plexiglass cover, cooling with tank, maintenance manual Et0n2e7ow more


lamborghin...
every day

New machines via email!

Be informed!
3
Manufacturer article no.: HS 601492 Machining: milling / drilling Cone: SK 40 RPM: 12000 Rotary feedthrough: Yes Lubrication: Grease Ms8er Internal cooling: Yes more
5
grinding length:600 mm grinding width:300 mm workpiece height:255 mm Table dimensions:300x600 mm max. table load:300 kg table speed -stepless-:5-25 m/min rapid traverse cross:900 mm/min rapid traverse vertical:450 m/min autom. vertical feed:0,001-0,999 mm grinding wheel dimensions (ØxWxBore):355x38x127 mm spindle speed:1450 U/min spindle drive:5 PS machine weight ab.:1700 kg Overall size:2250x1400 mm NC autom. vertical feed programmable AD5: electromganet faceplate with directly pole dispart:... more
1
Elect./Voltage: L8ss2 DOOSAN MV-6030 Vertical Machining CenterSpecifications: -- X-Axis [...] 60"" -- Y-Axis [...] 30"" -- Z-Axis [...] 24.6"" -- Distance From Spindle Nose To Table Top. 5.9"" To 30.5"" -- Distance From Center To [...] 30.9"" -- Table [...] 29.5"" X 63"" -- Table Load [...] 3,300 Lbs -- Spindle [...] 8,000 RPM -- Spindle [...] Cat 40 -- Tool Changer [...] 40 Positions -- Rapid Traverse Rate (X,Y & Z Axis)[...] 1181/945 IPM -- Cutting Feed [...] 472 IPM -- Spindle... more
5
Gearboxes, Planetary gears for hydraulic motor, hydraulic motor, hydraulic motor, hydraulic pump Transmission is unused Transmission for the drive of working platforms of the company GSL (German standard lift) -hydr. Fins spring pressure brake Drive shaft mm Translation 1:19 -universell can be used -25 x available Award pieces Dimensions 270/270/H260 mm Weight 42 kg / piece Uv79ggyg7 more
1
TECHNICAL DETAILS, Machine on base, motor speed : 2 700 [rpm], grinding diameter : 6-30 [mm], grinding angle : 8° - 12°, machine dimensions : 500 x 600 x 1 115 [mm], motor : 380 [v], EQUIPMENT, plexiglas cover, cooling with tank, maintenance manual 938hmt8td more
3
Manufacturer article no.: 0031-015052 Machining: milling / drilling Cone: SK 40 RPM: 12000 Rotary feedthrough: Yes Bbsfpjau Lubrication: Grease Internal cooling: Yes more
1
Baader 603 - Bone separator Man.year: 2002 Condition: As is Fyxxdy3ko Baader 603 is used for separating raw meat material from waste components, such as cartilages, veins, skin and bones. This machine can gently refine different raw product: fillet with or without skin, pinbone strips and trimmings, whole main bones and collar bones. Such model of separator with better productivity differ improved construction of loading and reliability. A flexible squeezing belt transports the product to a... more
6
Type of fuel: Electric Height: 217 cm Fork length: 1.200 mm Battery: 500 Ah 48 V Year of manufacture 2014 Lift height: 473 cm Integrated sideshift, Battery 48V 5PzS 500Ah 2014, 380V charger, Tires 70%, Nagq2 Available valves for additional hydraulic function: 1 Tyres: SE Black more
3
1 x measuring bar used Manufacturer: HEIDENHAIN Type: LS 603 Year of construction: 1998 s/n: 849863L M4 Weight: 20 kg No. 105 Terms of delivery: free loaded terms of payment: prior to pick-up D3gglrafg more
4
Manufacturer article no.: 0031-015052 Bbspaouv Machining: milling / drilling Cone: SK 40 RPM: 12000 Rotary feedthrough: Yes Lubrication: Grease Internal cooling: Yes more
1
Technical Data item number:: LM-1598 Manufacturer:: TRUMPF Type:: TRUMATIC L 6030 Year:: 2005 Working area:: 6000 x 2000 x 115 mm Laser rated output:: 3200 Watt Control:: Siemens Sinumerik 840 D Working hour:: 64.825h/0h Max. Sheet thick./St:: 20 mm Max. Sheet thick./VA:: 12 mm Max. Sheet thick./AI:: 8 mm Max. Speed:: 60/85 m/min Positioning accuracy:: +/- 0,1 mm Length:: 16100 mm Width:: 5200 mm Height:: 2000 mm Weight:: 21500 kg St... more
4
working range 3000 x 6000 x 600 mm laser capacity in Watt 5000 Control Power Automation PA 8000 NT Laser source: Rofin WB-Laser T050, 5,000 watts Year of manufacture laser source: 03/2003 (laser source was replaced in 2005) Operating hours Laser: 3,986 h Beam on: 1,351 h Operating hours control: 27,714 h Cfeuiafq Machine condition: not functional, compressor in cooling unit defective more
4
Permanent magnet motor, permanent magnet motor, electric motor, [...] Perm magnet motor, servo motor Performance 2 nm Da7bfeif Voltage 294 V Speed 9700 RPM Wave 14 mm Type B5 Protection class IP65 Dimensions 72/72/H310 mm Weight 4.9 kg more
4
Manufacturer article no.: HS 600110 Machining: milling / drilling Cone: SK 40 RPM: 12000 Rotary feedthrough: Yes Pthreq Lubrication: Grease Internal cooling: Yes more
6
The BVM stretch banders use an upper and lower film roll. In conjunction with a film stretching device a tight film sleeve is produced around the product. The film is stretched by means of rubber wind-back rollers, the degree of stretching being infinitely adjustable. The products are fed via transport conveyor in line. During the transport movement a film sleeve is sealed around the product. In the following shrink tunnel the products are shrunk to a stable multipack which can be safely transpo... more
5
work piece width:620 mm workpiece height:450 mm Ssu9wk drill diameter:10 - 40 mm The Kaltenbach saw drill line from 1999 is in good condition. It consists of the band saw KBS 620 DG and an APS 603 drilling line. The band saw is semi-automatic and equipped with bevel cutters and suitable for sawing steel profiles. The saw blade dimensions are 6175 x 41 x 1.3 mm. The cutting speed is infinitely variable in a range of 15 - 90 m / min The drilling line has 3 drilling units, one vertical and two h... more
5
Linear actuator, linear geared, hub gears, spindle drive Type linear module R036030000 Type drive 1FK7022-5AK7Z -FV Max 80N LM Guide ball screws 9dmz3s8uj Travel - mm -with brake Dimensions 230/70/H450 mm Weight 5.44 kg more
3
Laser on: 53352 h Beam on: 23742 h Wjsgu30 Control System: Bosch Working range: 6000 x 2000 mm Laser power:2600 watts Sheet thickness: 15mm Machine dimensions: 6100 x 2000 x 5200 mm Machine weight: 21500 kg Accessories: Chip conveyo more
4
Manufacturer article no.: 000.603.578 Itftfqt Machining: milling / drilling Cone: SK 40 UPM: 15000 Rotary feedthrough: Yes Lubrication: Grease Internal cooling: Yes more
6
TECHNICAL DETAILS, Strokes X. Y. Z : 710 x 610 x 610 [mm], Pallets dimensions : 500 x 500 [mm], Max. part height : 710 [mm], Max. part diameter :680 [mm], Max. pallet weight : 500 [kg], Pallets number : 2, Distance table / spindle axis : 85 to 695 [mm], Quick feeds : 48 000 [mm/min], Spindle speeds : 10 - 10 000 [Rpm], Spindle power : 20 [kW], Tools type : BT40 BIG PLUS, Floor space : 4.51 x 3.68 [m], Height : 3.10 [m], Machine weight : 13 000 [kg], Working hours : 4803 [h], EQUIPMENT, CNC HEID... more
2
power capacity unbek. kW volt unbek. V ampere A total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Lxetr more
3
"Spraying device WIWA 6030 Volumetric flow rate l/min: 6 Air pressure max bar: 240 Transmission ratio: 30 Bpiiv0qs Airless: Yes Technical type: Wall assembly Pump: Piston pump" more
5
Manufacturer article no.: 000.603.578 Machining: milling / drilling Cone: SK 40 UPM: 15000 Rotary feedthrough: Yes Lubrication: Grease C03msrdm8 Internal cooling: Yes more
3
Welding machine Mt99ig Manufacturer: Lorch Type: M6030 more
6
OVERVIEW: Brand: SEI Laser Model: MERCURY 603 Application type: Laser cutting Machine type: Laser Cutting Machine Availability: Immediately Construction year: 2006 Production hours: 22000 Location: Greece Origin country: Italy GENERAL DATA: Measurements width: 4250 mm Measurements depth: 3050 mm Measurements height: 1250 mm Machine weight: 3500 kg MAIN DRIVE: Laser brand: SEI Laser Laserpower: 0.35 kW Laser type: CO2 CONTROL UNIT: Brand: ROFIN Model: SC x30 MOVEMENT: X-AXIS movement: 2080 ... more
3
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er engine, electric motor, spindle motor, milling motor -1 x motor 0.3 kw 18000 rpm at 300 Hz Voltage 200 V Hidfm28do Recording diameter 16 mm Weight 5 kg more
6
press power max.: 160t working width max.: 3.000mm control unit: CYBELEC CybTouch 12 width between frames: 2.550mm required power: 15kW way back gauge: 625mm installation height max.: 500mm back stroke speed: 100mm/s equipment: - CNC control unit CYBELEC Cyb Touch with 2D graphic - 2 cylinder layout Y1/Y2 - CNC back gauge system in X- and R axis - CNC camber 3dca7mkqg - 2x moveable finger stops Z-axis - LAZERSAFE safety sytem - lateral protection with electronic switch - safety light guard for... more
6
Manufacturer article no.: 000.603.235 Machining: milling / drilling Cone: SK 40 Gu2ugc UPM: 15000 Rotary feedthrough: Yes Lubrication: Grease Internal cooling: Yes more
4
Under floor saw for Abkuerz - and miter cuts Saw blade diameter 400 mm; HW Z40 90 ° and 45 ° tilt 8ycrczbyw Cutting height of Max 148 mm Width 285 mm Table 930 x 640 mm Weight 140 kg Speed 2800 RPM complete accessories/slide Olle table with longitudinal fence, scale and measuring block, (unfortunately not in the picture!) without suction unit more
4
Charger 24V - 70A for lift trucks, Linde Jungheinrich still Ant lift truck battery charger, battery charger, truck part. 160391 technical data: Year: /. Manufacturer: Still Type: E 24V - 70A ecotron memory Input: AC 1N/PE 230V 50 Hz 2, 6kVA 11,3A Output: 24 V - 70 A Available quantity: 4 Condition: Used / fully functional More information: freshly tested Function test: OK Second-hand sale price: €275,00 (price per piece + VAT) Ze9xk09d more
4
Process controllers, controller, temperature controller, temperature sensor, temperature setting Type 994-603 Jli2v83 Weight 3 kg more


lamborghin...
every day

New machines via email!

Be informed!

to

to

Change search
LAMBORGHINI R 603
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close