Used Large Kitchens for sale (7,222)

Condition: used, mileage: 2,499 km, power: 295 kW (401.09 HP), first registration: 04/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Volvo FM 430 STX EXCLUSIVE HORSETRUCK 6 Horses POP-OUT, POP-UP. FULLY FULLY EQUIPPED! 6 horses, side and rear ramp, pop-out, pop-up, kitchen downstairs, cellar under the apartment, storage compartments around the truck, 6 kW diesel generator, 550 liters of fresh water, 300 liters of waste water, 5-6 sleeping spaces, living room, extra large bed above the bathroom, extra groom's bed, rear entrance door, video surveillance and temperature monitoring for the horse compartment, LG parking air conditioner, Kabola water heating with underfloor heating, dishwasher, 3 TVs/satellite, fine wood, bathroom, shower, toilet, air conditioning, kitchen, leather seating area, microwave, refrigerator and freezer, external tack cabinet, cable winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, tow bar, and much more. Dedpfx Aswf Tuxopwokr Subject to errors/input errors and prior sale. * NET SALE POSSIBLE. * Top Leasing Offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes of horse trucks and trailers. Please make an appointment in advance. Richard Theurer / Andreas Theurer

Condition: used, mileage: 85,000 km, power: 184 kW (250.17 HP), first registration: 03/2019, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MAN 12 250 Horse Truck, 5 Horses, Pop-Out, Excellent Condition. Capacity for 5 horses, with side and rear ramps, pop-out extension, underfloor storage beneath the living quarters, additional storage compartments around the truck, fresh water tank, waste water tank. Sleeps 5, living area, large bed above the bathroom, groom’s bed. Video surveillance and temperature monitoring in the horse compartment. LG stationary air conditioning, auxiliary heating, TV/satellite, fine wood finish. Bathroom with shower and toilet, air conditioning, kitchen, leather seating group, microwave, refrigerator, external tack room compartment, electric winch, cruise control, alloy wheels, air suspension, tow hitch, and much more. Errors, input mistakes, and prior sale excepted. Dkedpfx Ajygp Nyopwor * NET SALE POSSIBLE. * Attractive leasing offers available. Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands in the field of horse trucks and trailers. Please arrange an appointment in advance with Richard Theurer or Andreas Theurer.

Year of construction: 2013, operating hours: 42,479 h, condition: good (used), functionality: fully functional, machine/vehicle number: M-iQ K-M54 V6 P6, For sale is a used, fully functional basket conveyor dishwasher from MEIKO. Technical specifications: Manufacturer: MEIKO Model: M-iQ K-M54 V6 P6 Year of manufacture: 2013 Length: approx. 5.30 m Basket dimensions: 500 x 500 mm Robust stainless steel construction Suitable for professional use in large kitchens, canteens, hotels, and catering establishments Condition: The machine is in used, well-maintained, and fully functional condition. The conveyor belt has been recently renewed, meaning that a significant wear part has already been replaced. The M-iQ series from MEIKO stands for high washing performance, efficient energy consumption, and reliable continuous operation in the professional kitchen environment. Inspection is possible by arrangement. I will gladly send further photos and technical information upon request. Dkodpoza A T Eofx Apwjr Used item sold without warranty, unless legally required.

Condition: used, mileage: 10,000 km, power: 375 kW (509.86 HP), first registration: 03/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, MB Actros ProCabin 2651 STX Horsetruck / Motorhome demonstration vehicle with living trailer FULLY EQUIPPED! Capacity for 7 horses, side and rear ramps, pop-out, pop-up, downstairs kitchen, basement under the living area, storage compartments all around the truck, 6 kW diesel generator, 550-liter fresh water tank, 300-liter waste water tank, 6-7 sleeping berths, living room, large bed above the bathroom, additional groom’s bed, video surveillance and temperature monitoring in horse compartment, LG stationary air conditioning, auxiliary heating, 2 TVs/Sat, precious wood interior, bathroom, shower, toilet, A/C, kitchen, leather seating group, microwave, refrigerator & freezer, dishwasher, external tack locker, winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, trailer coupling, and much more. Errors, input mistakes, and prior sale excepted. * NET SALES POSSIBLE. * Top leasing offers * Net price domestic plus 19% VAT. Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service for all brands in the field of horse transporters and trailers. Dedpfx Apsyvnhbowskr Please arrange an appointment in advance. Contact: Richard Theurer / Andreas Theurer

Condition: used, mileage: 2,500 km, power: 375 kW (509.86 HP), first registration: 05/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, MB ACTROS 2651 GIGA STX EXCLUSIVE HORSE TRUCK – 5 horses ///NEW MODEL/// Dkodpfxey Uqryo Apwsr 5 horses, side and rear ramp, -Out, pop-up awning, kitchen below, cellar under the living area, storage compartments around the truck, 6 kW diesel generator, 550 liters of fresh water, 300 liters of wastewater, 5-6 sleeping places, living room, extra-large bed above the bathroom, rear entrance door, video surveillance and temperature monitoring for the horse compartment, LG stand-alone air conditioning, Kabola water heating with underfloor heating, dishwasher, 2 TVs/satellite, high-quality wood, bathroom, shower, toilet, air conditioning, kitchen, leather seating, microwave, refrigerator and freezer, external saddle storage, winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, trailer hitch, and more. Errors/input errors and prior sale reserved. * NET PRICE POSSIBLE. * Top leasing offers Location and viewing of our vehicles: STX HORSE TRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands in the field of horse transporters and trailers. Please arrange an appointment in advance. Contact Richard Theurer / Andreas Theurer

Condition: used, mileage: 186,000 km, power: 295 kW (401.09 HP), first registration: 03/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: gold, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Scania P410 STX HORSE TRUCK, 6 horses, POP-OUT, POP-UP, FULL FULLY EQUIPPED! Dkedpjy Ttbzsfx Apwjr 6 horses, side and rear ramp, pop-out, pop-up, kitchen below, basement under the living area, storage compartments around the truck, 6 kW diesel generator, 550 liters of fresh water, 300 liters of wastewater, 5-6 sleeping places, living room, extra-large bed above the bathroom, extra caregiver bed, rear entrance door, video and temperature monitoring for the horse compartment, LG stand-alone air conditioning, Kabola water heater with underfloor heating, dishwasher, 3 TVs/satellite, fine wood, bathroom, shower, toilet, air conditioning, kitchen, leather seating area, microwave, refrigerator and freezer, external saddle storage, winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, trailer hitch, and more. Errors/input errors and prior sale are subject to change. * NET PRICE POSSIBLE. * Top leasing offers. Location and viewing of our vehicles: STX HORSE TRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands in the field of horse transporters and trailers. Please arrange an appointment in advance. Contact Richard Theurer / Andreas Theurer.

Condition: excellent (used), functionality: fully functional, GERNAL 2000L | Tilting brewing kettle with hydraulic tilting (Process kettle with heating jacket) Manufacturer: GERNAL Model / Type: Tilting brewing kettle Working capacity: 2000 liters Internal tank dimensions: Ø 1700 x 1400 mm Overall dimensions: 2300 x 2500 x 2600 mm Heating system: Double jacket Tilting system: Hydraulic Equipment: - Control cabinet - Pallet with accessories This gigantic, industrial brewing kettle with a capacity of up to 2000 liters is an advanced process device designed for food processing plants operating on a large scale. This type of kettle is a key piece of equipment in large meat processing plants, ready-meal factories, fruit and vegetable processing plants, large central kitchens, airline catering facilities, and in the sauce, soup, and culinary base production industry. The tank construction is based on double-jacket heating technology, which prevents direct contact between the raw material and the heating element. This guarantees perfectly even temperature distribution over the entire surface of the large tank (Ø1700 mm) and completely eliminates the risk of burning thick product batches. The most important advantage of the machine is the automatic, hydraulic tilting system of the working chamber. Advanced actuators, powered by an external hydraulic pump, smoothly and effortlessly rotate the kettle, allowing for rapid discharge of the cooked product directly into waiting butcher carts or onto a subsequent transport and dispensing line. Dkjdpoy Umuwefx Apwjr

Condition: reconditioned (used), Year of construction: 2020, The DMK 20 C table cutter is the ideal solution for small to medium-sized meat processing businesses, upscale gastronomy, as well as large kitchens and catering, due to its compact, robust, and precise design. Its well-engineered construction offers users virtually unlimited versatility in all application areas. The machine is equipped with two independently operated, powerful motors, providing a wide range of control options. With the optional robust, mobile base frame, the desired mobility is ensured. You will receive an invoice with VAT shown. Our used equipment service for you: • 6 months warranty on electrical components, limited to the replacement of defective parts, excluding removal and installation costs • High-quality branded equipment at fair prices • Professional overhaul, inspection, and expert cleaning • Tested and fully functional – or your money back • Flexible shipping or self-collection options • Expert advice – before and after purchase • Provision of operating instructions, wiring diagrams, and spare parts • Safety inspection in accordance with DGUV V3 Professional engineering in a compact space: The DMK 20 C2 table cutter is distinguished by its exceptionally smooth and low-vibration operation, even at high speeds. The elaborate manufacturing of each component is carefully and precisely matched. The thick-walled cutter bowl, cast from high-quality stainless steel, provides extremely accurate concentricity, enabling tight adjustment of the cutting blades within the bowl radius. Small cutter, big performance: The powerful motors deliver the highest torque, even with challenging materials. Vibration-damping machine feet, the heavy, double-walled cutter lid, and the Plexiglas noise reduction cover all significantly reduce operational noise and emissions. The clearly arranged control panel with push buttons and the easily readable analog thermometer ensure efficient operation with a broad spectrum of applications. Machine features: • Completely stainless steel construction • Massive cast stainless steel bowl (Bowl capacity: 20L) • High-precision, maintenance-free cutting system • Stainless steel knife head with 6 blades • Tight cutting tolerances within the bowl radius • High stability • Extremely low-vibration operation • Vibration-damping machine feet • Plexiglas cutter lid • Analog, clearly readable thermometer • 6 stainless steel knives, 7 stainless steel spacer rings, two bowls Dksdpfx Apeyx A Rijwsr Drive & Controls: • Separate knife shaft drive with electromagnetic brake • Brake release function via push button for cleaning purposes when the lid is open • Separate bowl drive with directly mounted, maintenance-free gearbox • Two speeds, independently switchable • Large, easy-to-use push buttons with easy-to-clean protective covers Technical specifications: • Bowl volume: 20L • Usable fine sausage emulsion capacity (approx. kg): 16kg • Number of knives: 6 • Speed (rpm): 1500/3000 • Knife shaft power (kW): 3.3/4.5 • Mains voltage (V): 400 • Control voltage (V): 24 • Fuse: (A) 16 (slow-blow) • Dimensions (W x D x H): 83cm x 80cm x 115cm with mobile base on castors • Weight: 260 kg • Serial number: S18092 • Year of manufacture: 2020 • Model: DMK 20 C2

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 701099, This is a cooking kettle from the premium manufacturer Elro, model DBGN22-EDG-90-T, year of manufacture 2014. This pressure braising pan is suitable for both boiling and frying. The usable capacity is 90 liters. The cooking unit is mounted on castors for mobility and features steering handles. The purchase of this device includes an Elro connection beam for wall mounting, approximately 1300 mm long, allowing easy decoupling and movement of the supply lines. This is a premium product for large-scale kitchen technology. The lid cooling system is defective; the solenoid valve does not open—please refer to the note in the inspection report in the photo overview. Demonstration of the unit is possible at our facility, as the unit is sold without any warranty. Ask for your special offer price. VAT is shown separately on our invoices. All prices are gross, including 19% VAT. Dkodpfx Apjw Su H Uewjr Our used equipment service for you: High-quality branded equipment at fair prices Professional refurbishment/inspection & thorough cleaning Flexible choice between shipping or self-collection Expert advice—before and after purchase Provision of operating manuals, wiring diagrams & spare parts DGUV V3 safety inspection certification Technical specifications: Width (external dimensions): approx. 1500 mm plus 65 mm each for fixed handles on left and right Depth: approx. 950 mm including removable outlet tap Height: approx. 1800 mm including ceiling valve Power connection: V: 400 / kW: 15.10 / Hz: 50-60 Model: M-DBGN22-EDG-90-T Serial number: 701099 Volume: 90 liters Year of manufacture: 2014 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement

Condition: used, Winterhalter GM 85 – Advanced Vegetable Washer Boost your kitchen efficiency with the Winterhalter GM 85, the ultimate solution for professional vegetable cleaning. Designed for restaurants, catering services, and commercial kitchens, this machine ensures hygienic, fast, and energy-efficient washing of all types of vegetables. Key Features: - High-Capacity Cleaning: Handles large volumes of vegetables quickly, reducing prep time. - Gentle Yet Effective: Removes dirt and residues without damaging delicate produce. - Energy & Water Efficient: Optimized systems minimize water and electricity consumption. - User-Friendly Interface: Intuitive controls make operation simple for all staff. - Durable Construction: Built from high-quality stainless steel for long-lasting performance. - Hygienic Design: Easy to clean, ensuring compliance with food safety standards. Dkjdpfx Apjyudlfewor Whether you need to prepare leafy greens, root vegetables, or fresh herbs, the Winterhalter GM 85 delivers spotless results every time.

Condition: new, input voltage: 400 V, total width: 1,200 mm, GAS STOVE – BARTSCHER 6 Burners + Electric Oven | BRAND NEW | NEVER USED For sale: a brand new, never used professional gas stove from the renowned brand Bartscher. Ideal for restaurants, bakeries, fast-food outlets, and all professional kitchens. ✅ Key Features: 6 high-performance gas burners Integrated electric oven with large capacity Stainless steel construction – durable and easy to clean Professional build quality for continuous operation Perfect for all types of commercial gastronomy Original Bartscher product known for long-lasting performance Djdjx Aip Dspfx Apwokr Condition: NEW

Condition: used, mileage: 2,500 km, power: 368 kW (500.34 HP), first registration: 10/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: brown, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, MB Actros 2651 STX Horsetruck /Motorhome / New vehicle FULLY EQUIPPED! Dsdpfx Aoupcz Hjpwokr 6 horses, side and rear ramp, pop-out, pop-up, kitchen downstairs, cellar under apartment, storage compartments around the truck, 6 KW diesel generator, 550 liters fresh water, 300 liters waste water, 6-7 berths, living room, large bed above the bathroom, extra groom's bed, video surveillance and temperature monitoring for horse compartment, LG auxiliary air conditioning, auxiliary heating, 2Tv/Sat, fine wood, bathroom, shower, WC, air conditioning, kitchen, leather seating area, microwave, fridge and freezer, dishwasher, external saddle locker, cable winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, trailer hitch, and much more. Errors/entry errors & prior sale reserved. * NET SALE POSSIBLE. * Top leasing offers * Net price domestic plus 19% VAT. Location and inspection of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sale and service of all makes in the field of horse transporters and trailers. Please make an appointment in advance. under Richard Theurer / Andreas Theurer

Condition: excellent (used), Year of construction: 2009, Private sale: Hymermobil with numerous extras. Features include 2 air conditioning units, 2 auxiliary heaters (diesel, gas, and electric), ceramic toilet with 2 cassettes, rear garage, first registration 24.08.2009. Other highlights: drop-down bed, leather upholstery, shower, 2000-watt generator with dedicated built-in petrol tank (operable from inside above the oven), 4 solar panels, 1 vehicle battery and 3 habitation batteries (1 year old), 3,300 kg towing capacity. Iveco chassis with automatic transmission, cruise control, 5,400 kg permissible gross weight, 100 km/h speed approval, 2 heated external drawers, underfloor heating and hot water operated via gas or electricity. Includes 2 gas bottles with automatic switchover, twin rear tires, only 78,000 km driven. External shower with hot water, Goldschmitt rear air suspension, rear single beds with option for a full-width sleeping surface (2 additional sections, both long and short available). Automatic satellite system, 2 TVs. Vehicle inspection valid until May 2026 without defects. Approved for transport of up to 8 persons. First registration 24.08.09, 130 kW diesel, very economical—current consumption at 100 km/h is 12.1 l/100 km, at 80 km/h only 10 l/100 km. Vehicle length: 8.19 meters. Additional locks on entry door, separate driver’s cab door, and both garage doors. Reversing camera with multiple viewing angles. Large air awning, kitchen cabinets, carpet, etc., for outdoor use available and can be included if interested. Dksdpfx Aspl Sngspwjr

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KPP400, General: The Potato Washing and Peeling Machine is an advanced piece of equipment specifically engineered to clean and peel potatoes efficiently in large quantities. This machine transforms the labor-intensive and time-consuming task of potato preparation, making it indispensable in the food processing sector. Key Features and Benefits: Efficient Cleaning and Peeling: The machine uses rotating brushes or abrasive surfaces to effectively remove dirt, debris, and the outer skin of potatoes. Its design ensures a thorough cleaning and peeling process, which minimizes waste and maximizes the yield of usable potatoes. Time and Labor Savings: By automating the washing and peeling processes, this machine significantly reduces the manual effort and time required. It enables food processing facilities to handle large volumes of potatoes swiftly and consistently, enhancing overall productivity. Dkodet A Ampjpfx Apwer Versatility in Potato Types: The machine is adaptable to various types of potatoes, accommodating different sizes and varieties. It can be adjusted to handle different shapes and ensure uniform peeling, regardless of the potato's size or texture. Gentle on Potatoes: Despite its powerful and efficient operation, the machine is designed to be gentle on potatoes, preventing damage or bruising during the cleaning and peeling process. This ensures that the final product retains its quality and appearance. Water Conservation: Many modern Potato Washing and Peeling Machines are equipped with water-saving features, utilizing efficient water circulation systems to minimize water wastage during the cleaning process. This eco-friendly approach is crucial for sustainable food processing practices. Conclusion: The Potato Washing and Peeling Machine revolutionizes the processing of potatoes in commercial kitchens and food processing facilities. Its efficiency, versatility, and waste-minimizing capabilities streamline the potato preparation process and contribute to sustainable and efficient food production, meeting the needs of contemporary food processing industries.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: CCR-650, Purpose • Designed for efficiently removing the core from various vegetables, specifically Chinese cabbage and cabbage. Features • Manual Feeding Mechanism: The machine operates with manual feeding, allowing it to accommodate vegetables of varying diameters. By aligning the vegetable with the center of the blade, the core is effectively and consistently removed. • Efficiency: Engineered to quickly and efficiently remove cabbage cores, enhancing productivity in food processing environments. • Consistency: Provides uniform results by automating the core removal process, ensuring that each piece of cabbage is prepared consistently. • Labor Savings: Reduces the need for manual labor in core removal, allowing staff to focus on other tasks and improving overall workflow. • Commercial and Industrial Application: Ideal for use in commercial kitchens, food processing plants, and other industrial settings where large volumes of cabbage are processed. • Precision: Designed for precise core removal, minimizing waste and maximizing the usable portions of the vegetable. • Usage • Primarily utilized in commercial or industrial kitchens where large quantities of cabbage and similar vegetables need to be cored efficiently for use in various dishes and food products. • Additional Considerations • When selecting a cabbage core remover, it's crucial to assess the specific requirements of the kitchen or processing facility. Different models may Dsdpfx Ast Av Hvspwskr offer various capacities, features, and levels of automation to meet diverse operational needs.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Dkodpjznmpxofx Apwsr Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: new, functionality: fully functional, power: 85 kW (115.57 HP), empty load weight: 2,200 kg, fuel tank capacity: 200 l, TECHNICAL DETAILS Engine type: Diesel-hydraulic Engine: Deutz TCD 3.6 L4 Emission standard: China IV / Stage IV Rated power: 85 kW (115 hp) Fuel tank: 200 l MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,400 x 1,600 mm Weight: 2,200 kg EQUIPMENT Remote control Multiple cylinder blocks Hydraulic unit: External Djdoznmplspfx Apwekr Connections for variable displacement pumps: 2 units, manually adjustable Connections for large gear pumps: 2 units, adjustable via engine speed Connection for small gear pump: 1 unit, adjustable via engine speed

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 81019 01, grinding depth: 500 mm, grinding diameter: 800 mm, grinding spindle speed: 250 rpm, workpiece diameter (max.): 800 mm, pivoting range: 15 °, Machine in special design with increased grinding diameter and extended, hydraulic cross travel! Reconstructed and modernized in 1995 at the manufacturer's plant in Glauchau and commissioned in 1996. TECHNICAL DETAILS Dkodpozqcvtefx Apwsr Working area and grinding diameter Internal grinding diameter: 30–630 mm Extended internal grinding diameter max.: 800 mm External grinding diameter max.: 800 mm Workpiece diameter max.: 800 mm Grinding area and table movement Grinding depth: approx. 500 mm Table stroke: 800 mm Grinding diameter with workpiece protection max.: 800 mm Grinding diameter without workpiece protection: approx. 850 mm Distances and adjustments Distance workpiece spindle head – grinding spindle carrier: max. 1,225 mm Adjustment of the internal grinding attachment on the table: max. 545 mm Cross travel of the workpiece spindle stock: max. 650 mm Swiveling of the workpiece spindle stock: max. 15° Workpiece spindle Workpiece spindle speeds: 16 / 22 / 32 / 45 / 63 / 90 / 125 / 180 / 250 rpm Workpiece weight: max. 1,000 kg Spindle head: DIN 55021, size 11 MACHINE DETAILS Control and position display Control type: conventional Cross travel: via geared motor and positioning device Digital position display: HEIDENHAIN, 2 axes Coolant system Coolant system: with magnetic separator Machine weight: approx. 6.4 t EQUIPMENT Coolant system with magnetic separator Fixing devices or machine feet Various grinding wheels Diamond dressing tool Large grinding plate Internal and surface grinding attachment Halogen machine lamp Machine documentation

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Dkjdpfxoxaqa So Apwer Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Dkedpfxjzn Ayme Apwjr Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Dedpfjruakgex Apwjkr Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Dedexdfazjpfx Apwekr Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Dkjdpfx Apoxdfa Ujwer Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Dkodertrzdopfx Apwjr Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Dkodpfjrtrykox Apwjr Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.