Used Layer Bags Palletizer for sale (9,075)

Condition: refurbished (used), Year of construction: 2018, operating hours: 9,639 h, load capacity: 2,000 kg, lifting height: 122 mm, load center: 1,200 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 25.6 V, fork length: 2,400 mm, empty load weight: 666 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically reconditioned according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck ERE 120 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2018 Operating hours: 9,639 Lifting height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 2,400 mm Unladen weight: 666 kg Fpedoz Ikfuepfx Am Eep Load center: 1,200 mm Tires: Polyurethane Model type: ERE 120 Battery type: Lithium-ion Voltage: 25.6 V Battery weight: 310 kg

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 3,000 kg, construction height: 1,288 mm, fork carriage width: 730 mm, fork length: 1,150 mm, empty load weight: 720 kg, construction width: 734 mm, Low lift pallet truck Load centre: 600 Technical condition: New Front tyre type: Polyurethane Fpjdpfx Amewqtxne Esp Rear tyre type: Polyurethane Battery voltage: 24V Battery condition: NEW CE certificate, Lift height: 120 mm Tiller height max/min: 1288 / 1075 mm Ground clearance at wheelbase centre: 0 mm

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 993 h, load capacity: 2,000 kg, construction height: 1,245 mm, empty load weight: 620 kg, construction width: 734 mm, Low-lift pallet truck Load Centre: 600 Technical Condition: New Battery Voltage: 24V Battery Condition: 80 - 100% Fsdpfx Ajvky Hgem Eepp CE Certificate, Fork Length: 2400 mm

Condition: new, load capacity per storage section: 9,000 kg, total width: 1,100 mm, total length: 7,585 mm, total height: 2,500 mm, Thousands of further variants in stock and configurable online – fast delivery. For the rack shown in the picture: Price net 1,428.40 EUR (1,700 EUR incl. 19 % VAT) Delivery to Germany and Austria included. Volume discount (also for several racks combined): - from 2,000 EUR order value: 10 % - from 4,000 EUR order value: 15 % - from 8,000 EUR order value: 20 % For the rack shown in the picture: Fjdpfxo Ah Ulqs Am Eepp Max. load per pallet: 1,000 kg Number of pallet positions (incl. floor): 24 Decking: wire mesh decking Parts list: - 4x Upright P90 2.5m high, bay load: 9.000kg - 4x Beam 185cm - 80x50 - beam level load 2.000kg - incl. safety lock - 8x Beam 270cm - 140x50 - beam level load 3.000kg - incl. safety lock - 16x Einlagegitter 1100x885mm für 1.000kg Traglast pro Palettenplatz - 1x Load signs according to standard - incl. complete fixing material (bolts, floor anchors, base plates, safety locks, ...) You receive an invoice with VAT shown.

Condition: used, machine/vehicle number: IC1470, Year of construction: 2022, operating hours: 1,059 h, load capacity: 1,400 kg, lifting height: 4,690 mm, fuel type: electric, mast type: triplex, construction height: 2,030 mm, enginetype: Electric, manufacturer: Jungheinrich Fpsdjzv A R Ispfx Am Eep Serial Number: 90674186

Condition: excellent (used), gearing type: automatic, fuel type: diesel, color: yellow, first registration: 06/2023, Equipment: cabin, trailer coupling, = Additional Options and Accessories = - 2-pedal control - Rear work lights - Front work lights - Windshield - Enclosed cab - Radio/CD player - Hose assemblies - Telescopic forks - Automatic preheating system - Immobilizer = Notes = Very nice Caterpillar CAT 906 wheel loader from 2023 with only 356 operating hours. The machine comes from Germany and is in very good condition both technically and visually. The wheel loader has been well maintained and has very few operating hours. The CAT 906 is equipped with a multi-purpose bucket and is supplied with a pallet fork. This makes the machine versatile and suitable for various applications, such as in the construction industry, in agriculture, and in industry. Technical data and equipment: Manufacturer: Caterpillar Model: CAT 906 Year of manufacture: 2023 Operating hours: 356 Multi-purpose bucket Pallet fork included Tires in good condition Technically in very good condition Visually very well maintained Well maintained German machine A very nice and relatively new wheel loader with few operating hours. The machine is in good technical condition and is ready for immediate use. Inspection and test run possible by appointment. Additional pictures and videos are available upon request. Worldwide export and transport can be arranged upon request. Fpjdpfx As Ad I A Asm Eop = Further Information = General information Year of construction: 2023 Model year: 2023 Operating hours: 356 Serial number: CAT00906THZ600918 Weights Unladen weight: 5,500 kg GVWR: 5,500 kg Functional Quick coupler system: Yes CE marking: Yes Condition Technical condition: very good Optical condition: very good Further information Please contact Gerrit Haverhoek for further information.

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, machine/vehicle number: 12904540S1, working range: 1,500 mm, type of input current: three-phase, input current: 25 A, working width: 1,500 mm, power: 15 kW (20.39 HP), Storti GS/150-AL palletizing machine including pallet stacker | Year of manufacture 2004 For sale: a Storti palletizing machine, type GS/150-AL, manufactured in 2004, including a pallet stacker. The machine comes from a production environment and has a robust design. Minor repairs or maintenance work are required; therefore, it is preferably sold to specialized companies or technically skilled individuals. The machine is to be dismantled and collected by the buyer, and is sold without warranty or guarantee. Fsdpfx Ae Agvbmjm Ejpp

Condition: excellent (used), functionality: fully functional, Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Fodpfxoxqgffj Am Espp

Condition: new, load capacity per storage section: 4,500 kg, total width: 1,100 mm, total length: 2,845 mm, total height: 4,000 mm, Thousands of further variants in stock and configurable online – fast delivery. For the rack shown in the picture: Price net 827.00 EUR (984 EUR incl. 19 % VAT) Delivery to Germany and Austria: 99 EUR net. Free delivery from 1,000 EUR order value. Volume discount (also for several racks combined): - from 2,000 EUR order value: 10 % - from 4,000 EUR order value: 15 % Fedpfx Ae Ah Uiyem Espp - from 8,000 EUR order value: 20 % For the rack shown in the picture: Max. load per pallet: 500 kg Number of pallet positions (incl. floor): 12 Decking: chipboard decking Parts list: - 2x Upright P45 4.0m high, bay load: 4.500kg - 6x Beam 270cm - 100x50 - beam level load 1.500kg - incl. safety lock - 9x Chipboard decking 890x1095x38mm mit >1000 kg/m2 Bruchlast - 36x Sicherungsprofil für Chipboard deckingn - 1x Load signs according to standard - incl. complete fixing material (bolts, floor anchors, base plates, safety locks, ...) You receive an invoice with VAT shown.

Condition: good (used), RM Sealers RMBHC Horizontal bag sealer Fpsdpfx Ajz Dxk Rom Eep Stainless, continuous band sealer, mounted on variable speed conveyor, height adjustable conveyor, variable temperature, conveyor 1400mm x 200mm, mobile, 1Ph

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 5,297 h, load capacity: 1,600 kg, drive type: Lithium-Ionen, Low lift truck Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V Fpedpe Adw Sgefx Am Eop Battery type: Lithium-ion

Year of construction: 2016, condition: used, • Machine length: 13,300 mm • Machine width: 3,300 mm • Web width: 600 mm • Operating voltage: 200 VAC, 50/60 Hz, 3-phase • Power rating: 62 kVA • Current: 179.1 A • Maximum output with stacking system: 180 cycles/min • Main operating side: left side, facing the direction of travel Production Capabilities: • Three-sided sealed pouches • Stand-up pouches with elliptical bottom (Doypack) • Pouch width: 60–250 mm • Pouch length: min. 110 mm, max. 270 mm (two lanes), max. 540 mm (single lane) • Bottom gusset: 40–90 mm (extended, including edge trim) • Processable materials: PP/PE, PET/PE, PET/ALU/PE • Film thickness: 80–250 µm Equipment: • Parent roll unwinder with web edge control • Unwinder with winding shafts for 76 mm and 152 mm cores • Maximum clamping width: 1,200 mm • Maximum roll diameter: 800 mm • Bottom gusset strip unwinders for 76 mm cores • Maximum clamping width for bottom gusset strips: 160 mm • Maximum roll diameter for bottom gusset strips: 800 mm • Fine dust extraction for bottom gusset strips • Punching waste extraction for bottom holes • Cooling unit for cooling stations • Transformer for operation on a 400 V power supply • Bottom sealing with cooling, individual sealing process • Electrically adjustable top-sealing station • Automatic registration adjustment to the printed image • Two draw rollers Fpedpj Adl H Sefx Am Eep • Cross-sealing unit with six sealing stations and three cooling stations • Punching station for hanging holes with two punches • Punch holder for knives up to 260 mm wide • Complete punching of the pouches from the film web • Pouch stacking unit with discharge conveyor • Packing table and roller conveyor • Punching grid rewinder with two winding positions

Condition: good (used), machine/vehicle number: 17484, Year of construction: 2017, operating hours: 2,660 h, load capacity: 2,000 kg, lifting height: 220 mm, load center: 600 mm, fuel type: electric, mast type: other, construction height: 1,500 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 713 kg, enginetype: Electric, manufacturer: Jungheinrich Fpodpfs Adm Epjx Am Ejp Serial Number: 98173606 Battery Details: 24V 3PzS 375Ah BJ: 2017

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Fpodpfxsz Ip S Hj Am Ejp Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fpsdpfoz Iqp Tex Am Eep Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS Fpedpfez Irr Aex Am Eep - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: good (used), Technical data for the pallet racking system: Racking system: Bito Type: PRO Technical data for the installation: Number of racking bays: 01 unit Length per racking bay: approx. 25,500 mm Number of fields/racking bay: 09 units, each 2,700 mm Number of levels including base level: 02 units Included in the scope of delivery: 10x Pallet racking uprights, used Material color: Sendzimir galvanized Profile dimensions: 120 x 76 x 2.5 mm Including cross and diagonal bracing, upright protectors and base plates The uprights are pre-assembled (bolted truss) Height: 2,400 mm Depth: 1,100 mm 36x Pallet racking beam, used Material color: yellow Box profile: 150 x 50 mm Beam type: PT150M Connector: 5 hooks Clear span: 2,700 mm Max. load per beam pair 4,000 kg, with evenly distributed load 72x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 40x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Fodpfx Ajz Hiq Tsm Espp Approved for: cracked concrete 20x Shimming plate, used Design: fully galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on field and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us, depending on the delivery location or scope.

Condition: refurbished (used), Year of construction: 2014, operating hours: 5,416 h, load capacity: 2,500 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 575 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Manufacturer: Jungheinrich Type: Low-lift pallet truck ERE 225 f.P. Drive type: Electric Load capacity: 2,500 kg Year of manufacture: 2014 Operating hours: 5,416 Lifting height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fsdpfx Aez Iknvem Eopp Fork length: 1,150 mm Unladen weight: 575 kg Load center: 600 mm Tires: Polyurethane Model type: ERE 225 f.P. Battery type: PzS Voltage: 24 V Battery weight: 402 kg

Condition: new, Year of construction: 2026, total width: 10,000 mm, total height: 2,700 mm, working range: 2,500 mm, total length: 10,000 mm, compressed air connection: 10 bar, type of input current: three-phase, warranty duration: 12 months, overall weight: 4 kg, input current: 18 A, working width: 1,700 mm, working height: 180 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,700 mm, power: 11 kW (14.96 HP), 1 Operator pallet production equipment is designed to produce standard and non-standard pallets up to 2500 mm long. The boards are loaded into the pallet template manually. Pallets are easily programmed and saved in the Windows operating system. Fpsdpewm Ihcofx Am Ejp Automatic pallet unloading make the operator's work easier, there is no need to unload pallets manually. After setting the number of pallets to be loaded, the ABB Robot will unload the pallets automatically. Installation capacity per 1 shift: 300 – 500 pallets.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,999 h, load capacity: 2,000 kg, fuel type: electric, drive type: Elektro, Low lift truck Condition: Ready for use and fully functional Fedpfx Amewkx Rcj Ejpp Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,372 h, load capacity: 1,600 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low-lift pallet truck Load center: 600 Condition: Refurbished, no warranty Technical condition: good Fodpfx Amo Aat Ato Ejpp Front tire type: Vulkollan Front tire condition: New Rear tire type: Vulkollan Rear tire condition: New Battery voltage: 24V Battery capacity: 150Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2021 Battery condition: 60 - 80% Description: Handover with new FEM 4.004 inspection including inspection certificate. If you have any further questions, please call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Feel free to browse our website at fleischmann-foerdertechnik.com for more information. We will be happy to provide you with a quote for leasing and financing, as well as delivery at favorable conditions. A trade-in of Linde equipment is also possible – even without you purchasing a device from us. The stated operating hours were recorded as of the date of the listing. Subject to prior sale, changes, and errors. Initial lift, Rollers, wheels – completely NEW.

Condition: used, machine/vehicle number: 5311234, Year of construction: 2019, operating hours: 3,824 h, load capacity: 1,000 kg, lifting height: 2,424 mm, free lift: 1,200 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,690 mm, enginetype: Electric, manufacturer: Still Fodpfx Amsz Tdm Re Eopp Serial Number: F20271V00356

Condition: good (used), machine/vehicle number: 17479, Year of construction: 2021, operating hours: 2,721 h, load capacity: 2,500 kg, lifting height: 200 mm, load center: 800 mm, fuel type: electric, mast type: other, construction height: 1,240 mm, battery voltage: 24 V, fork length: 1,600 mm, overall weight: 829 kg, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 98297272 Battery Details: 24,0 V Fpsdpfxsz S Slxj Am Eop

Condition: new, Year of construction: 2025, functionality: fully functional, Automatic bagging system with net weigher and platform – 500 to 800 bags/hour Fully automatic bagging system for free-flowing bulk products. The system automatically handles the dosing, weighing, feeding, opening, positioning, filling, and closing of open-mouth bags. Technical specifications: Capacity: 500–800 bags/hour Bag length: 500–860 mm Bag width: 300–460 mm Fsdpfx Amo Afcr Uo Espp Weighing system: gravimetric net weigher Suitable products: free-flowing bulk products Control: PLC with touchscreen Bagging system, automatic bagging machine, bag erecting machine, net weigher, gravity weigher, weighing and bagging system, open-mouth bags, bag filling machine, bulk bagging system, animal feed bagging machine, Absackanlage, Absackmaschine, Sackaufsteckmaschine, Nettoverwiegung, Nettowaage, Schwerkraftdosierung, Sackfüllanlage, automatic Sackbefüllung, open mouth bagging machine, automatic bag placer, net weigher, gravity fed bagging machine, bag filling system, automatic weighing and bagging line.

Condition: used, functionality: unexamined, Batch of pallet racking with beams and boards. Assembled length approx. 35 linear meters. Construction height 400 cm. Uprights: 14 pcs | width 100 cm, height 400 cm Beams: 71 pcs | width 270 cm Wooden boards for use in beams: 31 pcs Fjdpfxjw Hyzue Am Espp Includes fixing clips. Only sold as a complete lot.