Used Pallet Turner for sale (6,798)

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, fuel type: electric, fork length: 1,150 mm, empty load weight: 107 kg, total length: 1,450 mm, drive type: Elektro, construction width: 560 mm, Low-lift pallet truck Fsdpfx Ame Aa Ebzo Dogi Load center of gravity: 600 Mast type: None Technical condition: New Front tire type: Solid tires Rear tire type: Solid tires Battery voltage: 48V Battery capacity: 10Ah CE certified.

Condition: good (used), machine/vehicle number: 17485, Year of construction: 2020, operating hours: 2,347 h, load capacity: 1,200 kg, lifting height: 4,300 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 1,900 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,022 kg, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 90606109 Fsdpfs Adm Evsx Am Djgi Battery Details: 24V 3PzB 225Ah BJ:20

Condition: excellent (used), Year of construction: 2023, Cell manufacturing year: 2023 Maximum stacking height: 2200 mm Performance: up to 12 cartons/minute Number of robots: 1 Fedpfxsz Snw Re Am Djgi Robot: YASKAWA Motoman PL80 Robot manufacturing year: 2022 Serial number: 295-11-1 Number of robot axes: 5 Robot payload: 80 kg Robot weight: 560 kg Gripping system: vacuum gripper Interlayer magazine: 1 unit, with side access Transport system: roller conveyor with carton centering Safety devices: robot cell with safety light curtain

Condition: used, machine/vehicle number: IC1552, Year of construction: 2021, operating hours: 3,703 h, load capacity: 2,000 kg, lifting height: 2,010 mm, fuel type: electric, mast type: simplex, construction height: 1,481 mm, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 98313210 Fedpfx Amj Afa Ruj Degi

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 106/1828, stack height: 1,220 mm, empty load weight: 750 kg, overall weight: 750 kg, total width: 620 mm, lifting power: 500 kg/m, input voltage: 380 V, total length: 900 mm, Machine was in use untill last week, then it was replaced by a new, bigger machine, due to working on larger formats . It is fully functional and it's possilble to see it in use too upon request. Fsdpfx Aj Ah Hx Sjm Dogi

Condition: used, machine/vehicle number: IC1549, Year of construction: 2021, operating hours: 1,437 h, load capacity: 2,200 kg, fuel type: electric, mast type: other, battery voltage: 24 V, enginetype: Electric, manufacturer: Jungheinrich Fjdpfs Adxa Sex Am Dogi Serial Number: 98310916 Battery Details: 24v 200ah

Condition: used, machine/vehicle number: IC1555, Year of construction: 2021, operating hours: 1,613 h, load capacity: 1,600 kg, fuel type: electric, mast type: other, enginetype: Electric, manufacturer: Jungheinrich Fedpfs Afa Rzex Am Degi Serial Number: 98320149

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, machine/vehicle number: 12904540S1, working range: 1,500 mm, type of input current: three-phase, input current: 25 A, working width: 1,500 mm, power: 15 kW (20.39 HP), Storti GS/150-AL palletizing machine including pallet stacker | Year of manufacture 2004 Fjdpfx Amo Agvbms Degi For sale: a Storti palletizing machine, type GS/150-AL, manufactured in 2004, including a pallet stacker. The machine comes from a production environment and has a robust design. Minor repairs or maintenance work are required; therefore, it is preferably sold to specialized companies or technically skilled individuals. The machine is to be dismantled and collected by the buyer, and is sold without warranty or guarantee.

Condition: used, machine/vehicle number: IC1489, Year of construction: 2021, operating hours: 4,431 h, load capacity: 2,500 kg, fuel type: electric, mast type: other, battery voltage: 24 V, enginetype: Electric, manufacturer: Jungheinrich Fodpfxo Afa R Uo Am Degi Serial Number: 98313796 Battery Details: 24v 265ah

Condition: excellent (used), gearing type: automatic, fuel type: diesel, color: yellow, first registration: 06/2023, Equipment: cabin, trailer coupling, = Additional Options and Accessories = - 2-pedal control - Rear work lights - Front work lights - Windshield - Enclosed cab - Radio/CD player - Hose assemblies - Telescopic forks - Automatic preheating system - Immobilizer = Notes = Very nice Caterpillar CAT 906 wheel loader from 2023 with only 356 operating hours. The machine comes from Germany and is in very good condition both technically and visually. The wheel loader has been well maintained and has very few operating hours. The CAT 906 is equipped with a multi-purpose bucket and is supplied with a pallet fork. This makes the machine versatile and suitable for various applications, such as in the construction industry, in agriculture, and in industry. Technical data and equipment: Manufacturer: Caterpillar Model: CAT 906 Year of manufacture: 2023 Operating hours: 356 Multi-purpose bucket Pallet fork included Tires in good condition Technically in very good condition Visually very well maintained Well maintained German machine A very nice and relatively new wheel loader with few operating hours. The machine is in good technical condition and is ready for immediate use. Inspection and test run possible by appointment. Additional pictures and videos are available upon request. Worldwide export and transport can be arranged upon request. = Further Information = General information Year of construction: 2023 Fgode Ad I A Aopfx Am Doi Model year: 2023 Operating hours: 356 Serial number: CAT00906THZ600918 Weights Unladen weight: 5,500 kg GVWR: 5,500 kg Functional Quick coupler system: Yes CE marking: Yes Condition Technical condition: very good Optical condition: very good Further information Please contact Gerrit Haverhoek for further information.

Condition: used, Year of construction: 2024, Filling weight range: 5kg-25kg, max. bagging capacity: 400 bags/h, bag material: PE, bag length: 570mm-880mm, bag width: 290mm-420mm, net weigher volume: 60l, control system: Sigmatek. Including conveyor belts and palletizing robot. The machine has very low operating hours and is in working condition. Documentation available. An on-site inspection is possible. Fedpe Adt Iqofx Am Djgi

Condition: refurbished (used), Year of construction: 2018, operating hours: 9,639 h, load capacity: 2,000 kg, lifting height: 122 mm, load center: 1,200 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 25.6 V, fork length: 2,400 mm, empty load weight: 666 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically reconditioned according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck ERE 120 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2018 Operating hours: 9,639 Lifting height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 2,400 mm Unladen weight: 666 kg Load center: 1,200 mm Fsdpfx Aoz Ikfuom Djgi Tires: Polyurethane Model type: ERE 120 Battery type: Lithium-ion Voltage: 25.6 V Battery weight: 310 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 4,700 h, load capacity: 1,600 kg, fuel type: electric, battery capacity: 250 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 497 kg, total length: 1,700 mm, total width: 720 mm, fuel: electricity, LINDE T 16 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 1.600 kg Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V 250 Ah v. 2020 Charger: 24 V Tyres: Polyurethan Mono Service weight: 497 kg Length: 1.700 mm Width: 720 mm Year of manufacture: 2020 Operating hours: 4.700 h Condition: working condition Internal no.: 1309304 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin. Fgjdpfx Amoz R Ugdj Doi

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 5,297 h, load capacity: 1,600 kg, drive type: Lithium-Ionen, Low lift truck Condition: Ready for use and fully functional Fjdpfx Ao Adw Sgsm Dsgi Technical condition: good Battery Volt: 24V Battery type: Lithium-ion

Condition: good (used), machine/vehicle number: 17484, Year of construction: 2017, operating hours: 2,660 h, load capacity: 2,000 kg, lifting height: 220 mm, load center: 600 mm, fuel type: electric, mast type: other, construction height: 1,500 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 713 kg, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 98173606 Fgodpfe Adm Epex Am Dei Battery Details: 24V 3PzS 375Ah BJ: 2017

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Fgodpfjz Ip S Hex Am Doi Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Fsdpfxez Iqp Te Am Dogi Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, Year of construction: 2001, functionality: fully functional, Möllers pallet shrink wrapping machine – Year of manufacture 2001 – 2 units available For sale: 2 Möllers pallet shrink wrapping machines, year of manufacture 2001. The machines are currently still installed in the existing production line and will become available at different times. Technical specifications: Manufacturer: Möllers Type: Pallet shrink wrapping machine Year of manufacture: 2001 Number available: 2 units Availability of machine 1: January 2027 Availability of machine 2: March 2027 Additional information: A video of the machines in operation is available upon request. Please note: The image shown is for illustrative purposes only and is not a photo of the machines offered. Due to the current installation situation and the limited available space, it is not possible to take a representative photo of the machines. Fgsdpfx Amsz Npz Sj Dei For more information or if you are interested, please feel free to contact us.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end Fodpfx Aez Irr Aom Dsgi ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: good (used), Technical data for the pallet racking system: Racking system: Bito Type: PRO Technical data for the installation: Number of racking bays: 01 unit Length per racking bay: approx. 25,500 mm Number of fields/racking bay: 09 units, each 2,700 mm Number of levels including base level: 02 units Included in the scope of delivery: 10x Pallet racking uprights, used Material color: Sendzimir galvanized Profile dimensions: 120 x 76 x 2.5 mm Including cross and diagonal bracing, upright protectors and base plates The uprights are pre-assembled (bolted truss) Height: 2,400 mm Depth: 1,100 mm 36x Pallet racking beam, used Material color: yellow Box profile: 150 x 50 mm Beam type: PT150M Connector: 5 hooks Clear span: 2,700 mm Max. load per beam pair 4,000 kg, with evenly distributed load Fsdpfx Amsz Hiq Ts Djgi 72x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 40x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 20x Shimming plate, used Design: fully galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on field and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us, depending on the delivery location or scope.

Condition: refurbished (used), Year of construction: 2014, operating hours: 5,416 h, load capacity: 2,500 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 575 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Manufacturer: Jungheinrich Type: Low-lift pallet truck ERE 225 f.P. Drive type: Electric Load capacity: 2,500 kg Year of manufacture: 2014 Operating hours: 5,416 Lifting height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 1,150 mm Unladen weight: 575 kg Load center: 600 mm Tires: Polyurethane Fjdpfsz Iknvsx Am Djgi Model type: ERE 225 f.P. Battery type: PzS Voltage: 24 V Battery weight: 402 kg

Condition: good (used), functionality: fully functional, construction height: 90 mm, construction width: 905 mm, conveying length: 1,270 mm, roll diameter: 60 mm, roll spacing: 170 mm, roll width: 855 mm, TAF article number: 1000003933 Manufacturer: BITO Overall dimensions: approx. 1,270 x 905 x 90 mm (LxWxH) Shelf width: 880 mm Cheek height: 80 mm Conveyor length: 1,270 mm Conveyor width: 855 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 170 mm Roller diameter: 60 mm Drive: Gravity Fodpfx Amjuda Ifj Degi Special features: 1 brake roller Condition: Used / fully functional Function test: OK

Condition: used, functionality: fully functional, roll diameter: 60 mm, roll width: 60 mm, roll pitch: 155 mm, total width: 955 mm, total height: 90 mm, total length: 2,500 mm, conveying length: 2,500 mm, construction width: 955 mm, construction height: 90 mm, TAF article number: 1000004052 Overall dimensions: approx. 2,500 x 955 x 90 mm (LxWxH) Width incl. side panel: 690 mm Side panel height: 80 mm Width incl. drive: 955 mm Conveyor length: approx. 2,500 mm Conveyor width: 855 mm Roller type: Steel Rollers per axle: 1 piece Fjdpfx Ast H Ez Dem Degi Roller pitch: 155 mm Roller diameter: 60 mm Drive type: Gravity Conveyor speed: constant Condition: Used / fully functional Function test: OK

Condition: new, Year of construction: 2026, total width: 10,000 mm, total height: 2,700 mm, working range: 2,500 mm, total length: 10,000 mm, compressed air connection: 10 bar, type of input current: three-phase, warranty duration: 12 months, overall weight: 4 kg, input current: 18 A, working width: 1,700 mm, working height: 180 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,700 mm, power: 11 kW (14.96 HP), 1 Operator pallet production equipment is designed to produce standard and non-standard pallets up to 2500 mm long. The boards are loaded into the pallet template manually. Pallets are easily programmed and saved in the Windows operating system. Fjdpfx Aswm Ihcsm Dogi Automatic pallet unloading make the operator's work easier, there is no need to unload pallets manually. After setting the number of pallets to be loaded, the ABB Robot will unload the pallets automatically. Installation capacity per 1 shift: 300 – 500 pallets.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,999 h, load capacity: 2,000 kg, fuel type: electric, drive type: Elektro, Low lift truck Fgsdowkx Rcepfx Am Dsi Condition: Ready for use and fully functional Technical condition: good