Used Paper Bag for sale (4,185)

Condition: new, Exhibition machine Type A according to DIN EN 16770:2018 without fire extinguishing device, tested according to the test principles GS-HO-07 of the BGHM. The dust extractor is a mobile suction and filter device for commercial use for installation in the work area. The dust extractor is suitable for collecting, conveying and separating dry wood, paper or plastic chips and dust on various processing machines. Consists of a vacuum-resistant housing with suction nozzle and check valve, antistatic filter elements with jet pulse cleaning, high-performance radial fan on the clean gas side with three-phase motor of energy efficiency class IE3 as well as integrated exhaust air sound insulation and air outlet grille. Dkodpjvwfu Nefx Afxot With 2 swivel and 2 fixed castors, 2 chip containers with filling bags and a circuit with 5 m connection cable and CEE device plug. The circuit is designed for automatic operation. The automatic start-up control for a maximum of 6 machines and the automatic cleaning of the filter with running time addition are included. For the automatic start-up, either the take-off coils or potential-free contacts of the machine can be used. 1K PVC single-layer paint in RAL 9006 (white aluminum). Delivered assembled and ready for use. For cleaning, compressed air prepared on site must be provided to the device (connection via plug nipple NW 7 / 6 bar). Technical data: Suction nozzle: Ø 250 mm Residual dust content:

Condition: used, Year of construction: 2001, functionality: fully functional, filter area: 43 m², volume flow: 7,650 m³/h, negative pressure: 2,200 Pa, rotational speed (min.): 2,800 rpm, We are selling our bag filter, type Nestro NAsf5/3. The unit is available for dismantling and collection at our premises. Due to a new acquisition with integrated heat recovery, this unit is now surplus to our requirements. Dkodszt Ruvopfx Afxst

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during the liquidation of a company. Flowpack machine ITALDIBIPACK Dibiflow 500 – Year of manufacture 2021 – Very good condition For sale is a high-quality flowpack packaging machine from the manufacturer ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in very good, well-maintained condition and is ideal for the efficient packaging of a wide variety of products in tubular bags. Technical data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Connection: 400V – 3Ph + T + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Equipment & Features Robust construction High-quality sensors for product and film detection Adjustable guide rails for different product widths Clean, modern control and drive technology Ideal for food, non-food, industrial products and more Dkodpfxjxw S Ixs Afxjt CE marking Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors and the entire mechanics are in very good condition (see pictures). Price Negotiable – €13,000 + €4,000 printer

Condition: excellent (used), Year of construction: 2006, Esta Eurosog W/H 80.299 Industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine and free-flowing dusts. The AC version is designed for sporadic use in cleaning work in workshops. Its smooth-running castors give the industrial vacuum cleaner a high degree of mobility. The spacious dust collection container has a capacity of 80 liters. Thanks to the patented tipping device, the dust can be disposed of effortlessly. Areas of application for the EUROSOG industrial vacuum cleaners: AC version for sporadic use. For dry, coarse and fine dusts For cleaning of processing machines For general cleaning work (e.g. workshop floors) Can be used in many industries (e.g. wood and metal industry) Metal industry Construction industry Wood industry Chemical industry Printing industry Flock industry Cleaning industry Handicraft industry Automotive industry Mechanical engineering Stone industry Paper industry Tobacco industry and many more Your benefits at a glance: Powerful industrial vacuum cleaner for dry dusts Compact design Easy disposal of the dust collection bag Special features of the EUROSOG-W series: Manual brush cleaning Cleanable permanent filter cartridges, available for dust classes M and H Optionally available with test certificates M and H Patented, tiltable filter housing Manufacturer: ESTA Extraction Technology Type: Eurosog W/H 80.299 with TÜV test certificate dust class "H Vmax: 360 m³/h Vmin: 815 m³/h pumax: 180 mbar filter area: 5m² Max. Air flow rate: up to 500 m³/h 230 V year: 2006 Item weight: 81,00 Kg RRP: 4900,-€ Dodjivdt Eopfx Afxjkt More industrial vacuum cleaners in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t Dsdpfjxdnn Iex Afxskt - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, 4-spindle paper drilling machine, Nagel Citoborma 490, year of manufacture 2000 – 4 drilling heads, type 45, installed for drilling diameters of 2 mm to 14 mm – two drilling speeds – torsion-resistant gantry design for precision and durability – optimal work safety through two-hand or foot operation Dksdpjzw Uzzefx Afxet – stack height 60 mm – feed depth up to 270 mm, enables drilling of A3 size sheets in double format – feed width 460 mm – easy drilling head and drill bit changeover guarantees minimal setup time

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF200MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 200 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Dkodpfx Afjvugz Esxet Pressing force: 16 Ton Bale weight: up to 200 kg (material depending) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine size: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Loading aperture: 1100 W x 800 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 8 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Twin Chamber Waste Baler, Multi Chamber Waste Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF550 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 550 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 550 kg (material depending) Bale size: 1200 H (var.) x 1500 W x 800 D mm Machine size: 3217 H x 2115 W x 1200 D mm Machine weight: 1650 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 5 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Dkedpfx Ajvamlnefxst Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF650 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 650 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 650 kg (material depending) Bale size: 1100 H (var.) x 1500 W x 1100 D mm Machine size: 3217 H x 2100 W x 1524 D mm Machine weight: 1930 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material Djdpfx Afsvamn Ajxjkt User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 5 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: used, Year of construction: 2021, functionality: fully functional, Used industrial dust extraction system made of stainless steel (INOX) – 50,000 m³/h Dkodpfx Afezlq Tpoxst The dust extraction system is suitable for companies in the wood industry, carpentry workshops, sawmills, and production facilities where a powerful and reliable dust extraction and filtration system is required. Main technical features: * Airflow: 50,000 m³/h * Positive pressure filter system * Made of stainless steel (INOX), not galvanized sheet metal * Piping included * Previously used for extracting oak sawdust * Used and fully functional industrial system The system is designed for the efficient collection and extraction of sawdust, wood dust, and other particles generated during wood processing. It ensures reliable operation even in demanding industrial environments. Suitable for: * Wood industry * Carpentry and joinery workshops * Sawmills * Wood processing production facilities * Central dust extraction systems For additional information regarding the condition, dimensions, included components, and price, please contact us.

Condition: used, Year of construction: 2016, Ref:11045 . 2016 Dürselen PB 04 N Paper Drill Free standing 4 headed paper drill Equipped with: Four drilling heads with adjustable spacing. Pneumatic cooling and lubrication for drills. Automatic drilling cycle, foot pedal control. Waste directed to outer door Drill table with adjustment, front and side margins. Table lock is automatically released. Technical data: Dksdpox Nfp Aefx Afxot Diameter of the drill: 2-10 mm, Stack height: 60 mm.

Condition: used, Film Packaging Machine, Bagging Machine, Vertical Form-Fill-Seal (VFFS) Packaging Machine, Hastamat R 250, Used Machine Manufacturer: Hastamat Verpackungstechnik GmbH Model: R 250 Year of Manufacture: 1999 Power: 5 kW Supply Voltage: 230/400 V, 50 Hz (requires a 3-phase industrial power supply) Bag Width: 70–250 mm Bag Length: 100–400 mm Dkodpfozktxlsx Afxjt Capacity: Up to 160 bags/minute Overall Dimensions: Width: 2600 mm Depth: 1780 mm Height: 2500 mm

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, foundation tilting table (third-party manufacturer), tilting table/preparation table, waste stripper, electronic double-sheet detection, pull marks BS + AS, machine height increased by 300 mm, 1 die-cutting frame, various stripping frames and stripping pins (including cart), quick centering device for sheet stacks, manual non-stop feed, manual non-stop delivery, price ex works, dismantling and loading can be arranged for an additional charge! Video available upon request! In May 2026, a PLATEN CONDITIONING was carried out by BOBST on the die-cutting machine. All deposits were removed from the upper and lower tables, and the die was polished. The sector was opened and assessed as being in "like-new" condition. Photos, video, or invoice available upon request! Note: The platform must be adapted by the buyer! Longitudinal handrail missing! Technical main data: Maximum sheet size: 720 × 1020 mm, Minimum sheet size: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² up to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Features of the Series II: C.U.B.E. system: Electronic Bobst machine control system Dedpfx Aszmyfdjfxjkt Centerline system: Micrometric adjustment for fast set-up times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double-sheet detection

Condition: used, functionality: fully functional, Year of construction: 1999, load capacity: 3,500 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Dkedpfx Aozlvmuefxjt Condition: Ready for use and fully functional Technical condition: good Description: Year: 1999 ISO 4A (61 cm) Capacity: 3500 kg Opening range: 250-1300 mm Rotator ID: OS2048

Condition: good (used), functionality: fully functional, total height: 1,500 mm, total width: 1,700 mm, total length: 2,250 mm, type of input current: three-phase, overall weight: 500 kg, film width: 650 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (max.): 199 mm, nominal power: 4.5 kW (6.12 HP), Side sealing machine – in very good condition, fully functional For sale is a high-quality side sealing machine in very good, well-maintained condition. The machine is fully functional and has been regularly serviced. The side sealing machine is ideal for the professional packaging of products with shrink film and ensures uniform, clean packaging results. Details: Very good, well-maintained condition Fully functional Uniform heat distribution Robust industrial design Ideal for production and packaging lines The machine can be inspected and tested on-site by arrangement. If you are interested or have any questions, please do not hesitate to contact us. Data sheet Box Motion Side Sealing Machine DEAPSS-5025BM Model DEAPSS-5025BM Applicable films (half-tube): POF / PP / PE Sealing mechanism 1: Longitudinal sealing (pneumatic) Sealing mechanism 2: Traveling transverse sealing (pneumatic) Sealing blade width (transverse): 500 mm Maximum product height: 199 mm Maximum format width (W + H): 450 mm* Maximum roll size (L x Ø): 650 x Ø 300 mm Machine size (L x W x H): 2250 x 1700 x 1500 mm Djdpfxjy Ttrme Afxokt Conveyor belt speed: 35 m / minute Maximum power consumption: 4.5 kW Connection voltage: 400 V / 3 phases Sealing cycles: up to 100 pieces / minute Air pressure (dry air): 6.0 bar Machine weight: approx. 450 kg

Condition: used, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2014 Djdpfxszxqnms Afxjkt Pressing force: 40 t

Year of construction: 2017, condition: used, functionality: unexamined, Leased vehicle returned Approximate transport dimensions: 50x175x96 cm, approx. 30 kg Dkjdozwck Djpfx Afxot Serial number: 41049060917 Stock ID: 13500329

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Djdpfxjy Hlvwe Afxjkt Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Dksdpfxszxdqzo Afxjt Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: used, functionality: fully functional, COMPLETE POWDER MIXING, WEIGHING & BAGGING PLANT – RUBERG / PAGLIERANI Complete industrial plant for mixing, weighing, conveying, and bagging of fine dry powders. The equipment is currently installed, FULLY OPERATIONAL, and available for inspection and demonstration in operation. The equipment is offered either AS A COMPLETE PACKAGE OR AS INDIVIDUAL MACHINES / SYSTEMS. The plant has been used for the processing and packaging of fine mineral powders. EQUIPMENT INCLUDED: RUBERG CM 2000 – 2,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM 2000 Batch capacity: approx. 2,000 kg Industrial batch mixer SEW main mixer drive: 37 kW Main mixer speed: 35 rpm 2 side rotor drives: 2 x 5.5 kW Side rotor speed: 720 rpm Georg Büttner weighing system Weighing range: 0–2,000 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 17 t/h Available separately or as part of the complete plant. RUBERG CM-ZE 1000 2SR – 1,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM-ZE 1000 2SR Year of manufacture: 2001 Machine No.: 168 / 11013 Useful mixing volume: approx. 1,000 liters Total mixing chamber volume: approx. 1,300 liters Industrial batch mixer Main mixer drive: 15 kW Main mixer speed: 40 rpm 2 side rotor drives: 2 x 7.5 kW Side rotor speed: 1,455 rpm Georg Büttner weighing system Weighing range: 0–1,100 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 10 t/h Pneumatically operated discharge system Discharge connection: DN 630 Filling connection: DN 175 Inspection connection: DN 150 Available separately or as part of the complete plant. PAGLIERANI TP35 WEIGHING & BAGGING MACHINE WITH ULTRASONIC SEALING Manufacturer: Paglierani S.r.l., Italy Model: TP35 Type: Weighing and bagging machine for valve sacks Number of filling spouts: 1 Application: Finely ground dry powders Main features: Single filling spout Horizontal-axis filling turbine Integrated weighing system Load cell Pneumatic bag support and clamping system Pneumatic product flow control Product feeding hopper Electrical control cabinet Pneumatic controls Conveyor arrangement Ultrasonic valve sack sealing system BRANSON ULTRASONIC SEALING UNIT Manufacturer: Branson Ultraschall / Emerson Technologies Model: Digital Compact 222 Serial No.: DAB 08102435 A The Paglierani TP35 is also available separately. CONDITION: Used – fully functional. All equipment is currently installed and can be inspected and demonstrated in operation by appointment. DOCUMENTATION: Technical documentation, operating manuals, and technical drawings are available for several components. Further photographs, documentation, and technical information are available upon request. SALE OPTIONS: The complete plant is offered as one package, but the individual RUBERG mixing systems and PAGLIERANI bagging system can also be purchased separately. Price for individual machines/systems: on request. Location: Greece Availability: Upon agreement Dkjdpfx Afjzv S Tloxst Inspection and demonstration in operation: By appointment Dismantling, loading, and transport can be discussed separately.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 981, overall weight: 600 kg, total length: 1,800 mm, total height: 1,900 mm, total width: 1,060 mm, warranty duration: 6 months, Equipment: type plate available, EC 101 IS GHD Hartmann Bread Bag Clipping Machine (Clipsealer) One of the most reliable devices to significantly increase work efficiency and positively impact production processes is the advanced EC 101 I clipping machine, designed by GHD HARTMANN. The machine features an independent impulse drive, allowing seamless integration with both horizontal and vertical packaging machines. The device also operates with an intermittent cycle, eliminating the need for synchronization with an upstream packaging machine. Technical data: - Output: approximately 60 packs per minute (depending on the specific product) - Dimensions: length approx. 1800 mm, width approx. 1060 mm, height approx. 1900 mm, conveyor height approx. 950 mm Dkedpfjy N Tlfex Afxjt - Weight: 600 kg - Product dimensions: length up to 400 mm, width up to 220 mm, height up to 120 mm - Capacity: up to 3,600 packs/hour - Packaging material: pre-made film or paper bags (paper only with clip closure) - Operating side: right 6-month warranty.

Condition: used, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2015 Pressing force: 40 t Dkjdpfszxqr Esx Afxst

Condition: used, Manufacturer: HSM Type: HL 4010 Re Dedpfx Ajzxqmiefxekt Year of manufacture: 2015 Pressing force: 40 t

Condition: used, Set of dual setups on rolling stand. Dual print heads allows for the marking of two product lanes Djdpfxec Skiro Afxekt Great for printing dates or codes on virtually anything, from plastic bottles to plastic bags to paper Stainless steel casing Stand mounted with casters Additional Details Voltage: other Voltage: 100-240 Phase: 1Ph Hertz: 60Hz

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dodpfjzxf Inox Afxokt Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h EQUIPMENT Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Paper band filter