Used Powermax 45 for sale (22,735)

Condition: excellent (used), RS Simulators Type: ST2K320/45 Water-cooled shock test system Working climate area Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions Width 1100 mm Height 2300 mm Depth 2300 mm Test chamber dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 850 kg The following information is for your safety as a buyer! Godpfxjtqcu Es Ag Tstt The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 5,975 h, load capacity: 6,000 kg, lifting height: 4,500 mm, free lift: 680 mm, fuel type: diesel, mast type: simplex, construction height: 3,200 mm, fork carriage width: 1,520 mm, fork length: 1,250 mm, empty load weight: 9,800 kg, total length: 5,100 mm, drive type: Diesel, construction width: 2,050 mm, Side loader Load center: 600 Fork width: 200 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for operation and fully functional Gtodpfxowx Sy Tj Ag Tst Technical condition: Very good Front tire type: Superelastic Front tire size: 3.00-15 Rear tire type: Superelastic Rear tire size: 3.00-15 Description: In addition to this Baumann model, we have approximately 200 other heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our warehouses in Hamburg and Gdańsk. Visit our homepage - sago-online. Hire purchase and financing under attractive conditions are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GX60/12/45. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. We are also happy to display your vehicle for commission sale at our facility. Heating, full cabin, Platform height: 1050 mm

Condition: good (used), axle configuration: 3 axles, first registration: 01/2019, suspension: air, Year of construction: 2019, Equipment: ABS, = Additional options and accessories = - EBS - Air suspension = Further information = Suspension: Air suspension Unladen weight: 5,940 kg Payload: 33,060 kg GVW: 39,000 kg Technical condition: good Visual condition: good Contact Emad Al Shogran for more details. Gtedpfx Ajxtm Rmeg Tst Vehicle number: Semi-trailer: 09 Van Hool / Container chassis 20´2x 20 `30`40`45 / 3 axles .: YE1A3C002AA428040 Unladen weight: 5940 Gross weight: 39000 3 x axles = Company information = Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Mrs. Sabine Faust Email.

Condition: new, sheet thickness: 45bending length: 2100upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel Gtjdpfxjd Ab Rno Ag Tjt - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 3.506,-- - oil coiler   STD. - center support EURO 13.600,-- - side supports EURO 9.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, functionality: fully functional, machine/vehicle number: 11163, Year of construction: 2023, operating hours: 300 h, load capacity: 12,000 kg, lifting height: 4,100 mm, free lift: 1,600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, power: 129 kW (175.39 HP), fork length: 1,000 mm, empty load weight: 21,450 kg, total length: 5,790 mm, drive type: Diesel, construction width: 2,300 mm, Sideloader Chassis number: 11163 Load centre: 500 Fork width: 150 mm Fork thickness: 50 mm Gedpfsx Ekz Ajx Ag Tstt Mast type: Duplex Condition: As new Technical condition: Very good Front tyres type: Pneumatic Front tyres size: 14.00-20 Front tyres condition: 60 - 80% Rear tyres type: Pneumatic Rear tyres size: 14.00-20 Rear tyres condition: 60 - 80%

Condition: used, machine/vehicle number: 12258, Rotor diameter: 350 mm Godpsh Ezf Rjfx Ag Tstt Rotor width: 450 mm 3-blade rotor 2 rows of stator blades Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW

Condition: excellent (used), RS simulators Here we offer a temperature test cabinet. Air cooled Gtodpogl Acrefx Ag Tjt Temperature range: -50°C to +100°C Test chamber dimensions: Width 520 mm x height 520 mm x depth 500 mm External dimensions: Width 820 mm x height 1750 mm x depth 1300 mm current consumption: 13,5 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 800 kg Type: TS 150/45 (50) Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, information are reserved!) Further questions we can answer on the phone for you.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 11,010 h, load capacity: 6,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,050 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 4,950 mm, drive type: Diesel, construction width: 2,230 mm, Sideloader Load center of gravity: 700 Fork width: 180 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Godpfxov U Ey He Ag Tett Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ 60/14/45. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would be happy to display your vehicle for consignment sale. Heating, full cab, Platform height: 1050 mm

Condition: ready for operation (used), Year of construction: 2002, Vehicle description Diesel Sideloader JUMBO 50/12/45 Gtjdpfx Ajid R Dneg Tet year 2002 lt. Counter 3.724 hours 5 tons lifting capacity 4,5 meters lifting height 1.2 meters fork length Selling price: 21.950,-- net Also favorable delivery possible !!!

Condition: new, sheet thickness: 45bending length: 2600upper roll diameter: 460 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) Gtsdod Ab Rhopfx Ag Tjt - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 12.500,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, Year of construction: 2009, BOVONE ELB 10/45 – Year 2009 Straight Line Edging Machine Variable angle SPEED [m/min]: 0.35 - 5.4 ARRIS WIDTH [mm]: 5 MITER ANGLE: 0°÷45° MINIMUM SIZE [mm]: up to 12mm – 65 x 65, 85 x 85, 105 x 105 from 12mm to 30mm – 80 x 80, 100 x 100, 150 x 150, 90 x 200 THICKNESS [mm]: 3-30 ELECTRICAL POWER: 400V 50Hz 31kW 72A DIMENSIONS LxWxH [mm]: 8400 x 1250 x 2900 Gjdpsxuppbefx Ag Tstt Backrest extension WEIGHT [Kg]: 4800

Condition: new, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 106653, New ZH for KR30/60. This is a new part supplied by the manufacturer KUKA. Gtjdpfxoxzynuo Ag Tjt

Condition: used, Technical details: diameter: 400 mm passage: 25 mm width: 58 mm revolution per minute: 1800 U/min weight of the machine approx.: 48 kg Power chuck, mechanical Gedju Nlpbjpfx Ag Tstt Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø 235mm Force tension 40kN Guide on one jaw is broken (see picture) *

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 13,135 h, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,060 mm, fork carriage width: 1,545 mm, fork length: 1,800 mm, empty load weight: 11,050 kg, total length: 5,200 mm, drive type: Diesel, construction width: 2,600 mm, Sideloader Load center of gravity: 900 Fork width: 160 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this DFQ50/18/45. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Heating, full cab, Gtjdowmtl Hjpfx Ag Tst

Condition: new, functionality: fully functional, Conveyor Belt EP 630/4 – 800 mm – 5+2 – 15 MPa – PE/PA For sale is a high-quality conveyor belt with the following specifications: Width: 800 mm Gtjdpoxy Nt Rjfx Ag Tjt Type: EP 630/4 Polyester/Polyamide tension members Tensile strength: 630 N/mm 4 fabric plies Cover plates: 5 mm top / 2 mm bottom Rubber quality: 15 MPa (standard industrial grade, abrasion-resistant) Material: PE/PA Condition: New / unused Length: 40 m Areas of Application Ideally suited for use in: - Quarries & gravel plants - Recycling facilities - Agriculture - General industry and conveying technology Benefits - High tear resistance - Durable covers - Good abrasion resistance - Suitable for medium to heavy-duty conveying tasks

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) Gtsdpsfnvviofx Ag Tst *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: used, color: other, emission class: euro1, Part suitable for: trucks Price: On request VAT/taxation: VAT deductible Gsdpfx Ajxr H Icsg Tett = Company information = For further information, you can reach us on weekdays from 8:30 a.m. to 5:00 p.m. and on Saturdays from 10:00 a.m. to 3:00 p.m. by phone. You can also email us at: See you soon!

Condition: like new (used), Drills grinder LA PRORA model Beta a.p. 45 for drills diameter 5 to 45 mm Gtodjivt Rxspfx Ag Tjt

Condition: excellent (used), functionality: fully functional, load capacity: 45,000 kg, total height: 4,450 mm, total length: 4,600 mm, total width: 11,800 mm, table load: 45,000 kg, pivoting range: 360 °, N.02 AVAILABLE Gedsxuq Acspfx Ag Tstt BODE CRADLE-TYPE WELDING POSITIONER Capacity: 50 t Maximum workpiece diameter: 5,000 mm Table with through central hole Ø 500 mm Table diameter: 5,814 mm, 8 guideways Table rotation: 360° Table tilting: +90° / -30° Eccentricity: 300 mm Variable rotation speed: 0.0045–0.18 rpm Variable table tilting speed: 0.0030–0.12 rpm Overall dimensions approx.: 10,200 x 4,300 x 3,700 mm USED EQUIPMENT BODE CRADLE-TYPE WELDING POSITIONER Capacity: 45 t Maximum workpiece diameter: 6,500 mm Table with through central hole Table diameter: 7,314 mm, 8 guideways Table rotation: 360° Table tilting: +105° / -30° Eccentricity: 230 mm Variable rotation speed: 0.00675–0.27 rpm Variable table tilting speed: 0.003–0.12 rpm Overall dimensions approx.: 11,800 x 4,600 x 4,450 mm USED EQUIPMENT

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 9,539 h, load capacity: 5,000 kg, lifting height: 4,460 mm, fuel type: diesel, mast type: simplex, construction height: 3,150 mm, fork carriage width: 1,460 mm, fork length: 1,380 mm, empty load weight: 8,340 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,200 mm, Sideloader Load centre: 700 mm Gtedpfxsw Aipmj Ag Tot Fork width: 180 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Pneumatic Front tyres size: 8.25-15 Rear tyres type: Pneumatic Rear tyres size: 8.25-15 Description: In addition to this Bulmor model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive terms are always available. We are also happy to purchase your used machine independently of a new acquisition. Our owner, Mr. Peter Sawitzki, will be glad to provide you with detailed advice about this S50D. P.S.: Our forklift master workshop specializes in repair, maintenance, overhauls, and special construction for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale. Cab heating, full cab, Platform height: 1040 mm

Condition: good (used), functionality: fully functional, Year of construction: 2013, load capacity: 6,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,080 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 12,100 kg, color: red, Equipment: cabin, ID43482 Machine type: side loader Brand: Bulmor Gedsxn Sfrspfx Ag Tott Model: HX JEQ 60/16/45 Year: 12/2013 Engine: electric Battery voltage: 80V Load capacity: 6000 kg Lifting height: 4500 mm Lowered mast height: 3080 mm Weight: 12100 kg Tyres: solid rubber, standard

Condition: used, Year of construction: 2014, Transnorm curved belt conveyor right bend 45°-800-700 IR1600 RA2435 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 1600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Gtjdpfsxqt R Iox Ag Tjt Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Locking hook, guy hook, cabinet hook, locking hook, locking bracket, folding bracket lock -Locking bracket: folding bracket unused -Number: 512x brackets available -Price: per piece / minimum order 10 pieces. Gtodpfxeuqf Hhe Ag Tot -Dimensions: 120/45/H20 mm -Weight: 0.2 kg/piece

Condition: used, Pillow Block Housings, Plummer Block Housings, Pillow Block Pillow Block Housings, Pillow Block Housing Unit, Pillow Block Housing Units, Pillow Block SKF, Pillow Block Housing Unit Gtedjiq Tiaepfx Ag Tjt -Pillow bearing: Bearing block, inner Ø 50 mm -Quantity: 4 pieces -Price per piece -Dimensions: 210/50/H170 mm -Weight: 3.3kg/pcs

Condition: used, Abrasive bodies, ceramic abrasive bodies, polishing bodies for rotary vibrators, vibratory finishing systems, vibratory finishing rotary vibrators, trowal systems, continuous vibrators Godpfx Aoink Tbeg Tstt -Condition: used -Manufacturer: Rösler, ceramic grinders 40/45/45 mm 1 box -Content: 71 kg -Price/delivery: complete -Transport dimension.: 600/400/H220 mm -Total weight: 72 kg