Used Schaffer 3550 for sale (202)

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Cake thickness: 30 mm Bcedpernnt Iofx Aglou Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 610, Cutting and printing line for 3-layer cardboard with flexo printers (2-colour printing) Bedpfx Agswl Izyolecu - maximum sheet size 950 x 2200 mm (skip - feed 1200 mm) - minimum sheet size 260 x 280 mm Machine dimensions length - 3550 mm width - 3660 mm height - 3500 mm weight 8000 kg power consumption - 8 kW Feeding unit to the device using a strip. The operation is supported by sucking the sheet with an air pump

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 23130745, total length: 3,500 mm, total width: 1,550 mm, total height: 2,570 mm, power: 1,351 kW (1,836.85 HP), fuel type: electric, volume flow: 2,239 m³/h, pressure (max.): 28 bar, Used Frick / York SGC 2313 - Sabroe SAB 233 S screw compressor skid for R717 (ammonia). Complete with a Schorch DQ7250S-PB83P-Z electric motor – 60 Hz – 110 kW – 3550 rpm with additional cooling, Sabroe OHU 07629 oil separator with a capacity of 1371 liters, Sabroe OF 2111 oil filter, Vahterus PSHE 3HH-66/2/1 Q-plate oil cooler, oil pump, and a Unisab 3 controller. The compressor has a displacement of 2239 m³/h. Capacity: 1351 kW at -6.7 °C/+35 °C. Bodpexyk Enjfx Aglscu

Condition: refurbished (used), Year of construction: 1999, operating hours: 11,000 h, functionality: fully functional, Sabroe SAB 128HF Refrigeration compressor Fully revised 110kW motor 400/440v/3-50/60hz 2950-3550 rpm. Refrigerant: HFC or R717 (Nh3) Bcjdpfx Aoxw Tqujglou

Condition: good (used), dimensions (l x w x h)approx. : 3550 x 2400 x 2300 mm weight approx. 7000 kg coil weight : 6000 kg: Coil width 1250 mm Max coil diameter: 2500mm Bcodpehhyzcjfx Aglju Coil inside diameter: 480-510mm Without control cabinet!

Condition: new, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,130 mm, Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN Bcodpfx Agoxluzwjlou ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: good (used), Code: 0060 Brand: SAOMAD Model: UTP 150/6 - CE Standard Tenoning machine for wooden frames, doors - CE Standard Technical data: Circular saw unit: Blade diameter mm 400 F30 - Motor Hp 4 - Cutting height mm 125 - Horizontal shifting mm 150 Cutterhead unit: Cutterheads lenght mm 150 - Max opening between cutterheads mm 185 - Cutterheads diameter mm 160 - Motor Hp 3 - Horizontal cutterheads adjustment shaft tenoning unit: Shaft diameter mm 35 - Useful working length mm 160 - Motor Hp 5,5 - Vertical and horizontal adjustment - Max tool diameter mm 320 Manual tilting tenoning carriage mm 600 x 600 Pneumatic workpiece holders Inclinable graduated fence +/- 45° Sliding safety guards N° 3 suction ports diameter mm 140 N° 1 suction port diameter mm 80 Bjdsv Hqfxopfx Aglecu Compressed air 6 atm Overall dimensions mm 3550 x 1400 x 1600 h

Condition: used, Year of construction: 1999, pressure 130 t chamfer lenght 3550 mm distance between columns 3060 mm dayligth 510 mm Control Cybelec DNC 80 throat 320 mm stroke 250 mm work height max. 900 mm weight of the machine ca. 12000 kg dimensions of the machine ca. 4,05x2,1x2,85 m Control Cybelec DNC 80 Y1;Y2;X;R axis Die shift with hand wheel 4 stop fingers hydraulic stamp clamping WILA Bedpfxevxwqfo Aglscu hydraulic die clamping System Amada 2 pcs. support arms saftey 2-hand / foot operation Various stamps and matrices

Condition: new, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,130 mm, - Max. Tragkraft 2500 kg - höhe 5.85 m - Max. Reichweite 3.40 m - Ausbrechkraft mit Schaufel 3427 daN - Aufwärtsneigewinkel 12 ° - Abwärtsneigewinkel 117 ° - Wenderadius (über Räder) 3.31 m - Gewicht 4800 kg - Bereifung Pneumatisch - Heben 8 s - Senken 5.40 s - Teleskop ausfahren 5.60 s - Teleskop Einfahren 4.30 s - Ankippen 3.50 s - Auskippen 3.60 s - Hersteller Kubota - Motornorm Stage V, Tier 4 final - Zylinderzahl / Tragfähigkeit der Zylinder 4 - 3331 cm³ - Nennleistung Verbrennungsmotor - Leistung 75 Hp / 55.40 kW - Max. Drehmoment / Motorumdrehung 265 Nm @ 1400 rpm - Zugkraft 3550 daN - 12V Batteriekapazität 110 Ah - Getriebetyp Hydrostatisch - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. Fahrgeschwindigkeit 24.90 km/h - Max. Fahrgeschwindigkeit (kann je nach geltenden Vorschriften variieren) 25 km/h - Parkbremse Automatische negative Parkbremse - Festellbremse Ölbad Lamellenbremsen an den Vorderachsen - Hersteller der Achsen Dana - Typ Hydraulikpumpe Zahnradpumpe - Hydraulikfördermenge / Hydraulikfördermenge – Hydraulikdruck 90 l/min-235 bar - Motoröl 11.20 l - Hydrauliköl 115 l - Fassungsvermögen des Kraftstofftanks 63 l - Geräuschpegel im Fahrerstand (LpA) 76 dB - Umgebungsgeräusch (LwA) 104 dB Bsdpfx Agsxd E Iljlocu - Schwingungsbelastung Hand/Arm < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Antriebsräder (vorne / hinten) 2 / 2 - Sicherheit / Kabinen-Zertifizierung Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 - Steuerungen JSM

Condition: new, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,130 mm, Maximale seitliche Reichweite: 3.40 m Bcjdpfexd D Spsx Aglou ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: used, Year of construction: 2006, BIGLIA B 301 M LATHE Max. bar working diameter: 42 mm Max. chuck working diameter: 220 mm Max. working length: 380 mm Max. swing diameter: 400 mm MAIN SPINDLE: Variable speed range: 100-5000 rpm Spindle nose: ASA 5" Spindle bore: 55 mm Front bearing inner diameter: 90 mm Chuck diameter: 165/210 mm Motor power: 11-15 kW (50%) TURRET: Number of positions: 12 Type: bidirectional External tool shank: 20x20 mm Boring bar shank: Ø25, Ø32 mm Indexing time (1 position): 0.15 sec LIVE TOOLS: Number of positions: 12 Variable speed range: 50-4000 rpm Motor power: 3.7 kW (50%) HYDRAULIC TAILSTOCK: Automatic quill stroke: 100 mm Morse taper: No. 4-5 Manual positioning: 380 mm Bcedpjxw Eabefx Aglju AXES: X axis travel: 160 mm (145+15) Z axis travel: 380 mm (360+20) B axis travel: 440 mm DIMENSIONS – WEIGHT: Overall size with chip conveyor: 3500 x 1754 x 1935 mm (H) Weight with chip conveyor: 3550 kg

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 412 kW (560.16 HP), type of cooling: air, overall weight: 3,550 kg, total width: 1,900 mm, total length: 5,370 mm, total height: 2,420 mm, AIRCOOLED CHILLER HITACHI RCUE 412 kW Bjdjxxwflspfx Agljcu Cooling capacity: 412 kW(12/7 — 35°C) Year of manufacture: 2009 Options: with economizer Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 2 pcs. Hitachi (screw) Number of fans: 12 pcs. Type of refrigerant: R407C Dimensions: 5.37 x 1.90 x 2.42 m. Weight: 3550 kg. Working hours: 29382/21390 h. Condition: Very good

Condition: excellent (used), functionality: fully functional, Technical data for the document shredding system: Manufacturer HSM GmbH + Co KG General data for the two-stage shredder system: Type Duo Shredder 5750 Year of manufacture 2015 Operating hours 3,093 hours Throughput capacity up to 800 kg/hour, depending on material Rated power 30 kW Rated current 62 A Bcjdpewrybrofx Aglsu Particle cutting size 6 x 40 - 53 mm Fuse protection 63 A gG/gL/C/K Weight of shredder approx. 2500 kg Data on the pre-shredder: Shredder type V 570 Working width of the cutting unit 500 mm Particle size 20 x 155 mm (w x l) Nominal power of pre-shredder 2 x 5.5 kW Nominal current of pre-shredder 2 x 11.5 A Data on the secondary shredder: Shredder type P 500.2 Working width of the cutting unit 500 mm Particle size 6 x 40 – 53 mm (w x l) Nominal power of secondary shredder 9.2 kW Nominal current of secondary shredder 18 A Security level according to DIN 66399 P-3, O-2, T-3, E-2 Baling press data: Type KP 100.1 Year of manufacture 2015 Operating hours 2,377 hours Pressing force 9 - 12 t Bale weight 40 – 150 kg/bale, depending on material Cycle time 7–16 seconds Feed chute dimensions 450 x 580 mm Bale size 630 x 500 x 400-1000 mm (w x h x l) Triple horizontal binding Press dimensions 3990 x 2225 x 1735 mm (l x w x h) Weight of press approx. 1000 kg Dimensions of entire system, conveyor belt, shredder and press: 9560 x 2071 x 3550 mm (l x w x h) Function description: This is a complete system consisting of a feed conveyor belt, a two-stage shredder and a horizontal baling pres. The material is fed onto the conveyor belt, shredded in two stages and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts for the system. Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length Bodpfsvvvw Eox Aglocu 15100 mm Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Year of construction: 1990, condition: used, pression: 250 t Bsdpfx Ae Dqaqsgljcu working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included Bcodpjd Ih S Uofx Aglou

Condition: excellent (used), Year of construction: 2011, 5-axis gantry machining center for the production of components for chairs, tables, doors, etc. from wood and MDF Max. useful working area (X-Y-Z) mm: 3550 x 1800 x 750 Spindle power: 2 x 7.5 KW Bcjdpfsxau Uysx Aglou Spindle speed: 2000 - 18000 rpm Equipment: Frame 2 x movable loading tables 4-spindle head 2 x loading magazines Numerical controller Electrical cabinet Control panel Protective cabin

Condition: ready for operation (used), Technical characteristics Works with IDRACAM software Axis X, course 3550 mm Axis Y, course 1100 mm Axis Z, course 425 mm Electrospindle rotation : 0°/90°/180° Bsdpfx Aoundhloglscu Work capacity : Axis X = 3500 mm Axis Y = 540 mm with electrospindle in vertical position at 90° Axis Y = 460 mm with electrospindle in horizontal position 0° or 180° Axis Z = 300 mm with electrospindle in vertical position at 90° Axis Z = 250 mm with electrospindle in horizontal position 0° or 180° Axis displacement : Axis X : 80 m/mn, acceleration 2,8 m/s Axis Y : 25 m/mn, acceleration 2,8 m/s Axis Z : 25 m/mn, acceleration 2,8 m/s Spindle : ISO 30 DIN 69871 Power : 4 kW Rotation speed : 12000 tr/mn 6 tool holder charger tool changing time : 8 secondes Maximum tool weight : 5 kg Max tool diameter : 220 mm Air Pressure : 7 bars Machine at CE normatives Power and Motors Power: 7 Kw Overall dimensions Lenght: 5000 mm Width: 1785 mm Height: 2470 mm

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Bcjdjnygvrspfx Agleu Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Contour Control – Excellent Condition!! Technical Data: - Year of manufacture: approx. 1994, Machine No. 10525 - Fixed angle table - Spindle speed: 17 to 3550 rpm - Infinitely variable feed in 3 axes from 0 to 1600 mm/min - Drive output: 6 kW - Travel X/Y/Z: 500/430/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 1,800 kg - Dimensions (LxWxH): 1.8 m x 1.8 m x 1.9 m Bodpfxsw Sv Ias Agljcu Accessories and Equipment: - HS 401 contour control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples About the Machine: For sale is a Hermle UWF 802M tool milling machine with HS401 contour control. This universal milling machine is in excellent condition. The contour control is very easy to operate, allowing for length and radius compensation within the program. No advanced CNC knowledge is required. Of course, the Hermle can also be operated manually without the control system. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically inspected by us. Take the opportunity to view and test the Hermle under power at our premises.

Year of construction: 2024, condition: new, Länge/Breite/Höhe: 3200mm/1550mm/2750mm Weight: 3550 kg Bending force: 60 tons Bending length: 2050 mm Passage between stands: 1700 mm stroke: 265mm Installation height: 530 mm Projection: 410 mm table height: 900 mm table width: 104 mm Y Fast speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Bsdpfefgz U Sox Aglecu Europ. bottom tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motor-driven crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guide along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: excellent (used), Year of construction: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS, cycle-controlled, year of manufacture 1998, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical specifications: Bcodpfjwyn Rqjx Aglsu Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed rate X and Y: 2 to 1600 mm/min, stepless Feed rate Z: 2 to 1000 mm/min, stepless Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable in 18 gear steps - Vertical milling head swivels to the right and left - Hydro-mechanical tool clamping vertical and horizontal - Automatic central lubrication - Separate coolant unit - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight: approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with NC control HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take this opportunity to view the machine under power on-site and see its condition for yourself.

Condition: like new (used), Year of construction: 2001, Gildemeister NEF 320 K Cycle-Controlled Lathe Siemens Sinumerik 810 DL Control Year of Manufacture: 2001 Very Good Original Condition Technical Specifications: Year of manufacture: 2001 Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Centre distance: 750 mm Cross travel: 185 mm Feed X: 4 m/min Feed Y: 4 m/min Rapid traverse X: 8 m/min Rapid traverse Y: 10 m/min Spindle nose DIN 55027 size 6 Spindle bore: 52 mm Drive power (100%): 7 kW Bcedpfxewx Rbpo Agleu Speed range: 14–3550 rpm (2 ranges) Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: ISO MK 5 Dimensions: 2600 x 1440 x 1440 mm Machine weight approx.: 2.0 t Accessories and Equipment: About the Machine: Offered here is a Gildemeister NEF 320 K cycle-controlled lathe with cycle control, year 2001, in very good original condition. The machine is, of course, fully operational. The slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is very user-friendly and allows for surface finishes similar to grinding. The machine comes from a training workshop of a large industrial company. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: new, functionality: fully functional, machine/vehicle number: VF630N368RD002314, mileage: 250 km, power: 323.62 kW (440.00 HP), first registration: 09/2025, fuel type: diesel, maximum load weight: 26,000 kg, tire size: 385/65 R22.5 + 315/80 R22.5, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2024, warranty duration: 24 months, Equipment: ABS, air conditioning, compressor, cruise control, differential lock, low noise, navigation system, onboard computer, retarder, soot filter, traction control, trailer coupling, New and fully equipped Renault C440 6x4 with Palfinger container hook system and hydraulically extendable bumper Bcodpfxeu U I Die Aglou

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VF610A369PD041734, mileage: 75,000 km, power: 353.04 kW (480.00 HP), first registration: 07/2023, fuel type: diesel, overall weight: 19,000 kg, tire size: 385/55 R22.5 - 315/70 R22.5, wheelbase: 3,800 mm, fuel: diesel, fuel consumption (combined): 22 l/100km, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: ABS, additional headlights, air conditioning, compressor, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, soot filter, spoiler, traction control, trailer coupling, Renault T High 480 Turbo Compound with aero pack Bcsdpfx Agouivwyolou