Used Sheet Filter for sale (15,667)

Condition: used, functionality: unexamined, Ferwood code: RU0005521 - Manufacturer code: 14.F5.GBD-YM00 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer refurbishment service, please contact us. 8.5 KG - 46X39X27 Rsdpfx Ageycftaoljn

Condition: used, functionality: unexamined, Ferwood code: RU0005521 - Manufacturer code: 14.F5.GBD-YM00 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer refurbishment service, please contact us. 8.5 KG - 46X39X27 Redpfx Ageycfr Ajljn

Condition: used, functionality: unexamined, Ferwood code: RU0005521 - Manufacturer code: 14.F5.GBD-YM00 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer refurbishment service, please contact us. 8.5 KG - 46X39X27 Rodpfx Agjycfrijlsn

Condition: used, functionality: unexamined, Ferwood code: RU0005521 - Manufacturer code: 14.F5.GBD-YM00 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer refurbishment service, please contact us. 8.5 KG - 46X39X27 Rsdeycfnqspfx Aglsn

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, As-new AL-KO POWER UNIT 300P dust extraction filter, 2019 Acquired just before the pandemic as a dust extraction system for a CNC machine. Very little usage, under 900 operating hours. The Biesse Rover milling machine is also for sale in a separate listing. Buyer is responsible for dismantling and removal of the unit. Rsdpfx Agsxz Rg Iolen The AL-KO Power Unit is a highly efficient, enclosed filter system equipped with a clean-air side fan. The system complies with H3 filtration class requirements: return air dust concentration is below 0.1 mg/m³. Supplied fully assembled for easy and fast installation and commissioning. Dust is collected into containers beneath the filter, enabling simple removal of shavings from under the machine. The filtered air can be returned to the workshop or discharged outside via a dedicated duct system. The enclosed design ensures low operating noise and a dust-free environment around the unit. The dust concentration of the return air is just one tenth compared to conventional bag-type extractors! Filter cleaning is performed automatically with compressed air or mechanically via shaker devices. Automatic cleaning is controlled by a vacuum sensor. Post-cleaning is performed when the unit is switched off. The filter media is Class C and features antistatic properties. Filter bag replacement is quick and easy via the light-opening roof panel on the filter. By positioning the extraction fan on the clean-air side, the system offers advantages over conventional units in terms of fire safety, noise level, and maintenance-free operation. Mechanical pre-separation of chips reduces wear on the filter media and lowers the filter load, ensuring maximum filtration efficiency. The Power Unit series achieves noise levels as low as 69 dB! In addition to wood, AL-KO dust extraction systems are also suitable for other machinable materials such as plastics, stone, cement, gypsum, and aluminium. POWER UNIT 300P - Extraction port D 300 mm, max. air flow 6,000 m³/h - Motor power 7.5 kW – filter area 30 m², collection containers 3x250 l - Includes compressed air cleaning - Includes automatic shutoff system

Condition: excellent (used), Year of construction: 2018, REF: MM5727 1 x Zumex Food Engineering juice extraction and flitration system with elevator. Manufactured completely in stainless steel. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Serial number - 454293.  ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification: Sizes     Head Unit     Oranges/MIN     KG/H     L/MIN     L/H 9-10-11     Kit 9     150,35     902,4      6,01     360,84 Rjdpfxot Uirce Aglsn 5-6-7-8     Kit 8     133,68     1145,4     7 ,64     458,22 2-3-4     Kit 7     116,94     2338,8     1 5,59     935,53 Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5m L x 1m W x 2.2m H. CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: good (used), functionality: fully functional, Sheet Cleaning Machine Jeros 5015/828 for 2-edge trays short side raised stainless steel design with oiling system DGUV V3 tested exclusively by us connection 400V, 16A CEE plug Used machine Options: sheet trolley maintenance contract service package delivery service training & commissioning Redjyaklcspfx Aglsn spare parts box Visit us!

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2026, 3 & 4 Edge Sheet Metal Cleaning Machine Rjdpfsw S Slnjx Aglsn Mica Model: CBP-3 Single-operator Mobile stainless steel construction Maximum sheet size: up to 600 x 800 mm Pull-out drip tray below for easy cleaning Dimensions: 2234 x 630 x 1372 mm (LxWxH) The versatility of this tray/sheet cleaner is demonstrated by its ability to process even 4-edge trays with edge heights of up to 24 mm. Debris and dirt are collected below the machine on an easily removable and cleanable tray. The unit is fully mobile and can be easily moved to any desired location after use. The entire construction is glass bead blasted, making the surfaces as smooth and hygienic as possible. Connection: 400V, 1 kW, 16A CEE plug Weight: 205 kg Brand new equipment With warranty & spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Sheet cleaning size up to 600 x 1000 mm Sheet greasing/oiling system Service package Delivery service Operator training & commissioning Visit us!

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Rodpfx Agohmmfkolen Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Year of construction: 2003, condition: excellent (used), EMC Mains filter Make Hitachi for frequency inverter Redpfx Asgrhimsglsn Filter for FFFB - SJ300- 750/900 HF,L 300,100 HF further data,see picture 3 x 220 Ampere length 1000 mm width 300 mm height 190 mm

Condition: as good as new (ex-display), FN 350 Single-phase EMC filter for motor drives and inverters compact filter solution for single phase inverter applications Touch-proof connection terminal enables compliance with EN 55011/14/22 compliant with ICE 60950 Frequency : dc -400 Hz Leakage current 4.9 to 11 mA Sensing power standard high 8 pieces available Rsdpfx Agocdzyrolen

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Schroder, controller model: POS 2000, working width: 3,200 mm, folding beam adjustment: 300 mm, installation height: 1,737 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, back gauge adjustment: CNC-controlled, overall weight: 4,380 kg, total length: 4,568 mm, total width: 2,450 mm, total height: 1,737 mm, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, 2006 Schröder SPB 3200 x 3.0 CNC Folder – POS2000 Control – Very Good Condition Machine Manufacturer: Schroder Machine Model: SPB 3200 x 3.0 CNC Folder Machine Type: CNC Sheet Metal Folder Year: 2006 Condition: Very good High-Quality Used CNC Sheet Metal Folder for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2006 Schröder SPB 3200/3.0 CNC Folder, a high-precision universal sheet metal folding machine from one of Europe’s most respected manufacturers. Rjdpfoyakn Rox Aglon This machine is in very good condition and is fully equipped with sharp tooling, box & pan tooling, and extra bending rails, making it ideal for both standard and complex folding applications. The control screen has been upgraded to a larger display, improving visibility, usability, and operator comfort. Key Features & Benefits Schröder SPB 3200/3.0 CNC Folder 3200 mm working length 3.0 mm mild steel capacity Schröder POS2000 CNC control Upgraded large control screen Includes extensive tooling package Rear roller support table fitted Heavy-duty industrial build Excellent accuracy & repeatability Ideal for fabrication, HVAC, cladding & precision sheet metal work Included Tooling & Equipment Rear Roller Support Table Box & Pan Folding Tooling Sharp Sheet Metal Folding Tool Extra Bending Bars / Rails This tooling package allows for maximum flexibility, from straight folds to boxes, pans, trays, and complex profiles. Technical Specifications – Schröder SPB 3200/3.0Machine Type: Universal CNC Sheet Metal Folder Year: 2006 Control: Schröder POS2000 Condition: Very Good Capacity Usable working length: 3200 mm Maximum sheet thickness: 3.0 mm Beam & Adjustment Upper beam daylight: 300 mm Vertical adjustment of bending beam: 300 mm Drive & Power Upper beam drive: 4.4 kW Bending beam drive: 4.4 kW Nominal power: 9 kVA Pneumatics: 6 bar Machine Dimensions Machine length: 4568 mm Machine width: 2450 mm Machine height: 1737 mm Machine weight: 4380 kg Ideal Applications Sheet metal fabrication HVAC ducting & panels Architectural metal & cladding Enclosures, trays & cabinets General engineering & contract folding Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines inspected & honestly described Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Rsdpfx Agetvb Iuolen Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: new, ADVANCED FILTERING SOLUTIONS: Filtra.4 made by EUROMAQUINA Filtra4 is the optimal filtration system to achieve a high degree of filtration and purification of industrial liquids. Design and implementation of complete turnkey systems IT ELIMINATES THE IMPURITIES that affect the quality of the emulsion. • Mechanical chips & swarfs • Floating solid elements • Insoluble oils (from greasing, oil carried by raw material, hydraulic oils, oils from slides, etc.) APPLICATIONS of Filtra4 Filtra4 is the optimal solution for various sectors such as: • Tube: both welded as Seamless • Machining centers: grinding, turning • Bars: turning, straightening and polishing • Steel transformation / forming plants • Forging or cold stamping IT IMPROVES THE EFFICIENCY of uour industrial processes 1. No consumables It completely eliminates the use of expensive consumables such as filtering paper or mesh. Filtra4 is an automatic filter that does not require consumables, saving both operating costs, and waste management by extracting them separately. 2.“Zero” maintenance Thanks to its internal self-cleaning system, Filtra4 remains in optimal condition without requiring maintenance intervention. With Filtra.4, you enjoy continuous operation and increased operational efficiency, without concern for maintenance tasks that cause downtime. 3. High degree of filtration Filtra4 offers highly efficient multi-stage filtration that ensures accurate separation of floating particles and non-soluble oils. 4. Full-surface rotating skimmer Our rotating skimmer allows complete separation and removal of undesired oil contaminants. 5. Automatic mixing addition Forget about adding oil manually. Our system allows to add the necessary amount of soluble, with the desired % of oil. 6. Single or integrated Filtra4 adapts to your needs. It can be integrated into an existing production line to optimize its performance, new and individualized for a specific equipment or centralized to supply multiple lines, providing the flexibility and efficiency that your industry demands. For detailed information, visit our dedicated website: No consumables: Automatic filtering without the use of consumables such as paper or filter mats “Zero” maintenance: Internal self-cleaning system High degree of filtration: Multi-layer filtration with separation of sludge, fine particles and non-soluble oils Rsdowq Ngujpfx Aglen Full-surface rotating skimmer: Complete and separate removal of contaminating oils Automatic mixing addition: with the desired % of oil Individual or integrated: Can be integrated in one line or centralised for several production lines

Condition: good (used), functionality: fully functional, Year of construction: 2010, SCHECHTL MAZ/310/CNC-MRA-VSP motorized swivel bending machine The motorized swivel bending machine MAZ 310 has a working length of 3100 mm and bends 2.50 mm steel. The MAZ is the strongest and at the same time the most flexible in the team of eccentric machines. Working Length 3100mm. Capacities Steel 2.5mm Aluminium 4.0mm Stainless Steel 1.5mm Copper 2.5mm Zinc 3.5mm Redpfx Agsyczhgolon Opening height 140mm Dimensions 4410mm length 2200mm width 2150mm height 3750kgs weight

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, 5 processing stations, Production width: 230 - 1250 mm, Production length: 500 - 2400 mm, Material thickness: 0.63 - 1.0 (1.5) mm, Material type: Steel 1203, bright, Mains voltage: 400 V 50 Hz, Power: 150 kW, Hydraulic pressure: max. 150 bar, Air pressure: max. 10 bar. Rodox Thqwjpfx Aglen The control system has been renewed by SIEMENS.

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57900 € 1094.31 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW Rsdpowiquksfx Agljn 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/sek 10 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl. OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1770,00 Conveyor belt with vacuum system - 3,0 kW € 5150,00 Additional PVC coated rollers on infeed and outfeed side € 1510,00 Air pressure system for cleaning the conveyor belt € 1290,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4670,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 3200,00 magnetic conveying system - 2 groups, 200 x 200 mm € 12020,00 Dema...

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Redpfx Agsx T Ah Dslen Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: used, Year of construction: 1997, functionality: fully functional, BOTTERO 507/CBM – Year 1997 Double-sided loader 6 positions per side Rsdpfxsycti Nj Aglon Maximum dimensions 3650 x 2750 mm Thickness 2-19 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Salvagnini Roboformer G2 DMP – Automated Press Brake Cell Location: Finland Rodpfxox H Av Ij Aglsn Availability: Immediately For sale is a fully automated Salvagnini Roboformer G2 DMP press brake cell, designed for efficient and high-precision sheet metal forming. The system includes robotic handling with loading, centering, sheet turning and off-loading stations, making it ideal for serial production and unmanned operation. General Information Brand: Salvagnini Model: Roboformer G2 DMP + RBF / KR / CMF40 / RF Category: Sheet metal machinery Subcategory: Press brake cell Year of manufacture: 2008 Country of origin: Italy / Netherlands Control system: Salvagnini Availability: Immediately Technical Data Maximum workpiece width: 4000 mm Equipment / Accessories Press brake: LVD 4000 Robot: KUKA KR 150 L110-2 Loading station: Yes Centering station: Yes Off-loading station: Yes Sheet turning device: Yes Additional Information Fully automated bending solution High productivity and repeatability Suitable for demanding sheet metal production 📌 Please verify technical details with the seller. 📩 Ask for a quote including delivery.

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity Rjdpfxew Dd Hpj Aglsn - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: used, Year of construction: 2012, For sale: Combined sheet metal and tube laser cutting machine BLM ADIGE-SYS LT COMBO This unit is designed for both sheet and tube/profile cutting in a single system – the ideal solution for versatile and flexible production. The machine is connected and fully operational, available for inspection and demonstration under power. Single owner. Complete service history available, the machine has been consistently maintained with annual technical servicing. Rodpfx Asyaavdjglsn Manufacturer: BLM Group Model: ADIGE-SYS LT COMBO Technology: Fiber laser Year of manufacture: 2012 Laser cutting hours: 8543 h Should you have any additional questions, we are happy to advise.

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: M0335, Cyril Bath type 20 T Hydraulic Swing Arm Profile Stretch Forming Machine year 1997 Rsdpfx Ageqcu Acolon serial number M0335 capacity 20 t engine power 126 kW electric connection 400 V description With control Cyril Bath Monitor Type: Flexscan 685 12 CNC axes 4 auxiliary axes Stretching force 20–200 kn Bending angle 2 x 95 degrees Rotation stretching cylinder 2x –45/225 degrees Component length from 762 to max 3810 mm Hydraulics from Rexroth with 2 x hydraulic pumps: 45 kW each Various spares available

Condition: ready for operation (used), Year of construction: 1998, A SULT dust extraction and filtration system with cartridges is available. Air volume flow: 3000m³/h, filter area: 84m², air pressure: 6bar, compressed air consumption: approx. 10Nm³/h, max. operating temperature: 70°C, fan speed: 2980rpm, total pressure drop: 4100Pa, number of cartridges: 4. Machine dimensions X/Y/Z: approx. 2000mm/900mm/5000mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible. Rodpfx Ajyfv N Dsglsn

Condition: good (used), total height: 800 mm, total width: 650 mm, total length: 2,200 mm, Used SEITZ ORION plate filter, equipped with 50 plates measuring 400 × 400 mm, designed for filtration of wines, juices, musts, and other food-grade liquids. This high-capacity model is particularly suitable for professional wineries, wine merchants, or food processing sites seeking a large filtration area in a widely used standard format. The robust construction of the filter, combined with a mechanical screw clamping system, ensures excellent stability during operation and reliable use over extended filtration cycles. The filter is compatible with standard 400×400 filter sheets, which are readily available on the market. Rjdpfxeyf Hndj Aglsn TECHNICAL SPECIFICATIONS - Brand: SEITZ ORION - Type: horizontal plate filter - Number of plates: 50 - Plate size: 400 × 400 mm - Structure: stainless steel frame and plates - Clamping: mechanical screw - Instrumentation: pressure control manometers - Connections: stainless steel - Mobility: rolling chassis Applications: - Wine filtration (clarification, pre-bottling filtration) - Juices and fermented beverages - Food industry applications - Regular filtration or as an addition to an existing filtration line This SEITZ ORION 400×400 plate filter – 50 plates – is an economical, reliable, and immediately operational solution for professionals needing high filtration capacity without the investment in new equipment. DIMENSIONS - Length: 2,200 mm - Width: 650 mm - Height: 800 mm Balanced format, offering high filtration capacity while remaining compatible with integration into existing cellars or workshops. ANNEXES - 6-month warranty - CE compliant