Skyjack sj 4632 buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6

Scissor lift Skyjack SJ III 3219

Sittard, NetherlandsNetherlands dealership location
6340 km
2016
used
Type of fuel: Electric Mast: scissor Field of application: Construction Lift height: 579 cm well maintained skyjacks multiple in stock EPA marked Bbpfmvpod2 Transport dimensions (LxWxH): 1.78x0.81x1.64 more
6
Type of fuel: Electric Colour: Red Mast: scissor 2q2yjm Field of application: Construction Lift height: 1.000 cm EPA marked Latest inspection: 2017 more
15

scissor lift SkyJack SJ 8831 E

More Skyjack Sj 8831
Oelsnitz / V., GermanyGermany
6773 km
1999
ready for operation (used)
Bca9vhmx7l Scissor lift by manufacturer SkyJack, type SJ 8831 E, Year of construction 1999, operating hours 3998 lt. Counter read, max. Working height 11.40 m, platform height 9.40 m, drive via 48 V electric motor with integrated charger, wheel formula 4x2, wheelbase 2300 mm, tire size 10-16.5, profile front 10 mm, profile rear 17 mm, overall dimensions in length x width x height 3500 x 2200 x 2700 mm, foldable railing, height without railing 2000 mm, weight 4855 kg, basket load 1134 kg, baske... more
6
Articlenumber : KB-1932 Make : Skyjack Model : SJ8841 Year : 12.1997 Serial no : 40928 Working hours (on servicemeter : 3751 Engine make : Kubota D1105-E Fuel : Diesel Voltage : 12 Dimensions LxWxH (mm) : 3750 x 2200 x 2900 Total quantity in stock : 1 Q0xhofvv Weight (Kg) ca : 5605 Undercarriage (condition in%) : 30 Capacity (Kg) : 681 Max. lifting height (mm) : 12500 Driving height (mm) : 2900 Country of origin : Canada Comments : In fair condition, comes with new battery, lift pressure 160 Ba... more
6
Articlenumber : KB-1930 Make : Skyjack Model : SJ8841 Year : 01.1998 Serial no : 40947 Q0uicnnl Working hours (on servicemeter : 2478 Engine make : Kubota D1105-E Fuel : Diesel Voltage : 12 Dimensions LxWxH (mm) : 3750 x 2200 x 2900 Total quantity in stock : 1 Weight (Kg) ca : 5605 Undercarriage (condition in%) : 30 Capacity (Kg) : 681 Max. lifting height (mm) : 12500 Driving height (mm) : 2900 Country of origin : Canada Comments : In fair condition, comes with new battery, lift pressure 160 Ba... more
6
Articlenumber : KB-1929 Yfq9etzjg Make : Skyjack Model : SJ8841F Year : 07.1997 Serial no : 40814 Working hours (on servicemeter : 4323 Engine make : Kubota D905-E Fuel : Diesel Voltage : 12 Dimensions LxWxH (mm) : 3750 x 2200 x 2900 Total quantity in stock : 1 Weight (Kg) ca : 5605 Capacity (Kg) : 681 Max. lifting height (mm) : 12500 Driving height (mm) : 2900 Country of origin : Canada Comments : In fair condition, comes with new battery, lift pressure 160 Bar, platform 3500 x 1680mm, 2x exta... more
6
Articlenumber : KB-1928 Make : Skyjack Model : SJ8841 Year : 12.1997 Serial no : 40925 Working hours (on servicemeter : 2720 Engine make : Kubota D1105-E Fuel : Diesel Voltage : 12 Dimensions LxWxH (mm) : 3750 x 2200 x 2900 Total quantity in stock : 1 Weight (Kg) ca : 5605 Yfq8rrobe Undercarriage (condition in%) : 30 Capacity (Kg) : 681 Max. lifting height (mm) : 12500 Driving height (mm) : 2900 Country of origin : Canada Comments : In fair condition, comes with new battery, lift pressure 160 B... more


skyjack sj...
daily

New machines via email!

Stay updated!
7

CRON TP4632E

Bornheim, GermanyGermany
6419 km
2011
ready for operation (used)
Hm90g0efc more
6
grinding length 510 mm grinding width 210 mm workpiece height 300 mm grinding wheel size 200 x 38 x 76,2 mm table surface area 500 x 180 mm grinding wheel speeds 2800 U/min total power requirement kW weight of the machine ca. 1800 t dimensions of the machine ca. 2 x 1,3 x 1,8 m Bbp3eogyyf Condition: ready for operation Electric 380 Volt Seperate hydraulic equipment Cooling equipment Draw-off device hydraulisch Digital readout Visulesta 2E Electro-magnetic stretch plate 400 x 180 D... more
4
Tool holder MK 4 Bb7wbbuwc7 Stepless speed adjustment Automatic feed in 3 speeds more
4
Mitsubishi SJ-9-A spindle motor, serial number according to the photo, used, normal wear, 100% functional, included with com. FotosACHTUNG: Please separately request costs for shipping and handling! ATTENTION: Please enquire for charges for packing and transport separately! Bcnnh2ae2n more
5

Center Lathe POTISJE PA 65

Mönchengladbach, GermanyGermany dealership location
6371 km
1991
used
turning diameter over bed:1200 mm turning diameter over slide rest:1000 mm Bcbyribk30 turning length:6000 mm turning dia. in gap:1600 mm spindle bore:140 mm spindle turning speed range:2 - 800 U/min feeds - longitudinal:0,049 - 5,6 mm/U feeds - cross:0,024 - 2,8 mm/U threading metric:0,75 - 64 mm/Stg. threading WHITWORTH:16 - 64 inch tailstock quill taper MT:6 main drive:28 kW max. torque on the spindle:5000 Nm weight of the machine ca.:14 t total power requirement:30 kW dimensions of the mach... more
5
Producer: - Malasja - Type: E2X76A Latex 330 Yru2ao - Year of production: 2016 - Device weight: 188 kg - Printing speed: up to 17 m2 / h - Print width: 1.63 m HPE2X76A plotter designed for printing large-size banners has 2 printheads number of cartridges 7 HP Latex ink, water-soluble, with undercoat wallpapers and others. Overall dimensions 2 561 x 840 x 1380 mm. more
1

PALL SASJ051 M01068

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
Nfylp more
15

Lathes Potisje PA 65 DC

Babberich, NetherlandsNetherlands dealership location
6320 km
1990
ready for operation (used)
Technical data Turning diameter over bed Ø1300 mm SteuerungsartConventionel 2 axis dri Ss2z8w Diameter of Bettschlitten1000 mm Turning diameter in the pit Ø1630 mm Drehlänge6000 mm Werkstückgewichtca 5000 kg Spindelbohrung140 mm Speed range / stufen500 R... more
4
Mitsubishi SJ-9-A spindle motor, serial number according to the photo, used, normal wear, 100% functional, included with com. FotosACHTUNG: Please separately request costs for shipping and handling! ATTENTION: Please enquire for charges for packing and transport separately! Bcnnhro9hm more
4

Center Lathe POTISJE PA 45

Dreieich, GermanyGermany dealership location
6568 km
1977
used
turning diameter over bed 910 mm turning diameter over slide rest 600 mm turning length 3300 mm 2c7r7gijh center height over bed 450 mm turning diameter in the gap 1200 mm centre distance 3300 mm bed width 660 mm spindle bore Ø 140 mm turning speed range 11 - 500 U/min power requirement 15,0 kW taper in tailstock-quill MK 6 dia. of quill 120 mm quill stroke 410 mm coolant voltage 400 V total power requirement 15,5 kW weight of the machine ca. 8 t dimensions of the machine ca. 5,70 x 1,40 x 1... more
1
Grinding length: 450mm, grinding width: 200mm, workpiece height: 300mm, table dimensions: 630x130mm, grinding wheel dimensions: 200x38mm, length: 1800mm, width: 1400mm, height: 1800mm, weight: 1.5t. Bkxmsdh more
6
Swing over bed: Ø900 mm. Swing over cross slide: Ø600 mm. Spindle bore: Ø140 mm. Distance between centres: 3.500 mm. Accessories: Cb3jykrs 4-chuck Ø800 mm. 4-chuck Ø850 mm. Faceplate Ø800 mm. 3-chuck 1 open support/rest. Transport can be arranged worldwide. Price includes loading on truck or in container. more
15

Lathes Potisje PA 45 DC

Babberich, NetherlandsNetherlands dealership location
6320 km
1990
ready for operation (used)
Technical data Turning diameter over bed Ø910 mm SteuerungsartConventionel turning lathe Diameter of Bettschlitten600 mm Turning diameter in the pit Ø1240 mm Drehlänge4000 mm Werkstückgewicht5000 kg Spindelbohrung140 mm Nec0v Speed range / stufen500 RPM ... more
4
All Bradley servo motor MPL-B310P-SJ22AA, serial number according to the photo, good condition, 100% needed, functional, included with com. photos Cpdqwc7o more
6

Articulated boom lift Palazzani TSJ 23

Sittard, NetherlandsNetherlands dealership location
6340 km
2005
used
Type of fuel: Diesel Mast: articulated arm Field of application: Construction Yrqxvk EPA marked more
2

Gear Shaping Machine LORENZ SJ 7/1000-8474

Metzingen, GermanyGermany dealership location
6677 km
1962
used
max. wheel diameter 1000 mm gear width 160 mm max. module 7 Rjwg9ngip min. module 0,5 total power requirement 4,5 kW weight of the machine ca. 5 t more
6
Type of fuel: Diesel Colour: Red Mast: telescopic Field of application: Construction JLG 860 SJ * 2002 Bb8evrnceb * 6316 hours * Perfect working condition * 28.21 m working height * 23.51 mtr range * 4x4 drive * Incl. books and documents EPA marked Latest inspection: 2017 more
12
Hydraulic surface grinder Jakobsen SJ 12 Magnetic disk: 550x200mm Height: 170cm Width: 185cm Depth: 95cm Feeds in all three axes with operating manual 6 wheel shots 20 wheels Apparatus for the grinding wheel balancing Fully functional with coolant system with grinding wheel dressing good condition may be viewed on the spot and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, ... more
1

Center Lathe CONTUR SJ-470

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6725 km
used
WORKING RANGE TURNING - swing diameter (max) 470 mm - turning diameter (max) 235 mm - worpiece length max. 1000 mm BED GAP / BRIDGE Mt9vs0 - swing in gap 690 mm MAIN SPINDLE - spindle bore diameter 58 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 - spindle diameter 58 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - adva... more
5
All Bradley servo motor MPL-B430P-SJ22AA, serial number according to the photo, good condition, 100% needed, functional, included with com. photos T77g0erp more
6

Gear Shaping Machine LORENZ SJ7A/1000

Malsch, GermanyGermany dealership location
6597 km
used
max. wheel diameter 1000 mm gear width 200 mm max. module 7 min. module 0,1 distance table - lower edge of ram 450 mm no. of strokes 31 - 175 Hub/min Vq2lvm total power requirement 6 kW weight of the machine ca. 5,2 t Raiser Block 80 mm more
4

Gear Shaping Machine LORENZ SJ 7/1000-9066

Metzingen, GermanyGermany dealership location
6677 km
1962
used
max. wheel diameter 1000 mm gear width 160 mm max. module 7 min. module 0,5 total power requirement 5,5 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H9iy9z0t3 more
4

FLAT GRINDING MACHINE JAKOBSEN SJ 25

Brügg, SwitzerlandSwitzerland dealership location
6614 km
ready for operation (used)
Technical data Table length 450 mm Table width 180 mm Execution: Hydraulic Maximum distance between ... more
13
The ECOCA CNC lathes of SJ-20 series combine speed, power, accuracy and efficiency of production. The 45° inclined bed design allows a good chip fall and a rapid changeover of tools and clamping device. The compact dimensions are ideal for small production plants and guarantee maximum profitability. Generously Z-axis dimensioned linear in X and guarantee maximum rigidity and damping for best availability and durability. ECOCA SJ-20 MC CNC lathe CNC control FANUC 0i-TD screen 10.4 "includi... more
1

Center Lathe CONTUR SJ-520

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6725 km
used
WORKING RANGE TURNING - swing diameter (max) 520 mm - turning diameter (max) 260 mm - worpiece length max. 1500 mm MAIN SPINDLE - spindle bore diameter 78 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 - spindle diameter 78 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - advance x-axis (max.) 0.4 mm/r - pitch of spindle ... more
4
All Bradley servo motor MPL-B310P-SJ22AA, serial number according to the photo, good condition, 100% needed, functional, included with com. photos Etbgvjn more
6

- USED- 2-AXIS CNC LATHE ECOCA SJ 30B

Matelica (MC), ItalyItaly dealership location
7213 km
1996
ready for operation (used)
MAX ROTATING DIAMETER: 580 mm MAX TURNING LENGTH: 460 mm MAX TURNING DIAMETER: 280 mm BAR PASSAGE: 75 mm SPINDLE: 4200 rpm; 11-15 Kw; 254 mm X-AXIS TRAVEL: 190 mm Z-AXIS TRAVEL: 520 mm RAPID FEEDS X-Z: 20 - 20 m/min TURRET HEAD: 12 POS CONTROL UNIT: FANUC O-T WEIGHT: 4700 Kg Bciyhyuk2o OVERALL DIMENSIONS: 3355 x 2140 x 1900 mm ACCESSORIES: SWARF CONVEYOR; TOOL PRESETTER NOTE: COMPLETO DI UN SET DI MORSETTI PRICE: On demand more
15

Gear Shaping Machine LORENZ LORENZ SJ7/500

Rostock, GermanyGermany
6587 km
as good as new (ex-display)
Gear Shaping Machine LORENZ SJ7-500 Category Gear Shaping Machine LORENZ - SJ7/1000 Gear Shaping time immediately Freight basis ex Warehouse more
6
Centring hole grinder Fabr. WMW Suhl type SJXZB/1 size 160 x 1000 LO Fabr.# 141/86/87 Technical data: KL. / gr. Drilling / grinding length 50 / 1000 mm Spindle retainer: MK 3 KL / gr. Workpiece diameter 6 / 160 mm Gqjcgbzai Grinding head in the Arbor hole 125 mm Oszilationsgroesse 0-5 mm Oszilationsdoppelhuebe 125 / min 2 speeds of 55 / 110 RPM Power 4 kW Weight 620 kg External dimensions L x D x H 550 x 800 x 1200 mm with: -motor. Material rotation -Oscillation -Control cabin... more
1

EDM machine Ingersoll CENTER 400 / 64 bit HSJ

Burbach, GermanyGermany dealership location
6496 km
2002
reconditioned (used)
Year of build 2002 generator 70 amps - multi pulse control Mitsubishi - 64-bit CNC HSJ high speed jump in Z (up 18.000 mm/min) 7wv7jwb9a Travel (X, Y, Z) 400 x 300 x 300 mm Bowl (W x D x H) 650 x 500 x 340 mm integr. C-axis measuring resolution 0.001 degrees electrode changer 20 plate changer accessories CO2 fire-extinguishing, integr. Cartridge filtering capacity work table 500 kg, State overhaul more
6

Laser cutting machine WUHAN Golden Laser GJMSJG-150300DT 800W YAG lamp pump laser

Eutighofer Straße 144a, 73525 Schwäbisch Gmünd, DEGermany
6698 km
2015
good condition (used)
Information on the machine: Manufacturer:-WUHAN Golden laser Model: GJMSJG-150300DT 800W YAG lamp-pump laser Juxd83 Year of constr.: 2015 The advantage of this machine is that it requires no cutting gas but the supplied air compressor is sufficient to cut up to 8 mm steel. Table length: 3000 mm Table width: 1500 mm Laser power: 800W Laser operating hours: approx. 880 h Hours of operation: 1255 hours Total power: 18 KW Weight: 5600 kg more
5
All Bradley servo motor MPL-B430P-SJ22AA, serial number according to the photo, good condition, 100% needed, functional, included with com. photos G9vfysgfq more
3
drilling capacity steel/GG: 40/55 mm spindle taper: 4 MK arm length: 345 mm table size: 500 mm Ø spindle sleeve stroke: 170 mm Nhtwkw0n spindle turning speed range: 150, 300, 440 u. 880 rpm engine: 380 V, 2/3 kW space needed: 1070 x 750 x 1940 mm weight: 700 kg more
10

Gear Shaping Machine LORENZ LORENZ SJ 7/1000

Rostock, GermanyGermany dealership location
6587 km
good (used)
Description: 1 used Gear Slotting machine, Make: LORENZ Model: SJ 7 max. Wheel Dia. max outer tooth 1.000 mm. Wheel Dia. maximum at about 750 mm internal gearing. Gear width 160 mm Module range from 0.5 to 8,6 Max workpiece weight 200 kg stroke 160/180 mm stroke positions for maximum adjustment. 140 mm internal spindle taper MK 4 spindle bore 160 mm workpiece height between the plate and blow head 330 mm height in the slide guide 380 mm stroke rates 31-175 min Feed ... more
3
Digital large format printer: Gzfyzi2vs Roland SOLJET Pro II v SJ-645EX 64-inch printer Model SJ-645EX Printing/Cutting Method Piezo Inkjet method Manufacturer: Roland Model: Roland Soljet ProIIV 645EX Year: unknown Equipment: 8 Colors Availability: Immediately Defects: None, was under maintance contract Machine is connected and can print Price: on request more
8
Grinding range 500x250x275mm Table size 500x180mm Cmbfqhye Balancing device MARCELS MASCHINEN CH more
4

Frequency inverter Hitachi SJ200, SJ100

Waldstr. 17, 57250 Netphen-Deuz, DEGermany
6492 km
2006
good (used)
Frequency inverter Siemens DM8 230R LOGOI 230 RC Bbva3fvwu8 was last built in a cold circular sawing machine cutting Hunter LT 520 The manual is available more
5
Recording: MK 4 drilling capacity: steel/35/45 mm speed: 40-720 RPM. infinitely adjustable via AZ gearbox, Variator and 2 levels, engine auto. Feed: 0.09 - 0.16 - 0.28 mm / Rev. Zfoux8gv new Rev counter, Main switch fitted. Deflection circuit-breakers are retrofitted,. Spindle stroke: 180 mm maximum distance spindle nose to table: 770 mm throat depth: 345 mm turntable: diameter 560 mm, rotatable Table height with hand crank and rack and pinion drive power: 3.1 4.6 HP Voltage: 380 V, 16 ... more


skyjack sj...
daily

New machines via email!

Stay updated!

to

to

Edit search
SKYJACK SJ 4632
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close