Used Slitter Rewinder for sale (320)

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Knsdezpbazspfx Ahaoc Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Year of construction: 2006, condition: good (used), functionality: fully functional, VIVA CODIMAG 340 5-COLOR OFFSET LABEL PRINTING PRESS WITH VARNISHING AND HOT-FOIL STAMPING We are pleased to offer the following well-equipped VIVA CODIMAG 340, designed for the high-quality production and finishing of premium labels. The machine combines five offset printing units with an additional varnishing unit, hot-foil stamping, semi-rotary die-cutting, and inline finishing equipment. Its versatile configuration makes it particularly suitable for wine and spirits labels, cosmetics, food labels, and other demanding applications requiring precise printing and decorative finishing. _____ MACHINE DETAILS Manufacturer: Codimag Model: VIVA 340 Ksdpfxeztqi Ho Ahajnc Year of manufacture: 2006 Web width: 340 mm Printing process: Offset printing Printing units: 5 offset printing units Additional unit: 1 varnishing unit Availability: By arrangement • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, screens, and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable web transport throughout the complete production process Decorative Finishing • Hot-foil stamping unit • Hot-stamping equipment • Suitable for metallic, decorative, and premium finishing effects • Inline enhancement of labels without requiring a separate finishing process Converting Equipment • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control and reduction of waste _____ WHY THIS VIVA CODIMAG 340? • Premium Offset Printing Quality The offset printing process is particularly suitable for applications requiring sharp details, fine screens, smooth gradients, and high-quality color reproduction. This makes the machine an attractive solution for premium labels in industries such as wine and spirits, cosmetics, pharmaceuticals, and specialty food products. • Five Printing Units Plus Varnishing The machine is equipped with five offset printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and protected or visually enhanced with a varnish in one production process. • Integrated Hot-Foil Stamping The hot-foil stamping equipment enables metallic and decorative effects to be applied directly inline. This adds significant value to premium labels and reduces the need for a separate offline finishing process. • Complete Inline Production Printing, varnishing, hot-foil stamping, die-cutting, perforating, slitting, and rewinding can be carried out within one production line. This reduces material handling, shortens production times, and improves overall production efficiency. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit offers flexibility for different label formats and repeat lengths. It is particularly advantageous for short and medium production runs, where frequent job changes and flexible format handling are important. • Integrated Corona Treatment The corona treatment system improves the surface tension of the material and supports better adhesion of inks, varnishes, and coatings on a wide range of substrates.

Year of construction: 2016, condition: good (used), CMC PROFI-LINE R-320 Rotary / Semi-Rotary Label Die-Cutting & Finishing Machine 320 mm | Servo Technology | Register Die-Cutting | Rewinding | Professional Label Finishing Dear Sir or Madam, we are pleased to offer the following CMC PROFI-LINE R-320, a professional rotary die-cutting and label finishing machine designed for the converting of self-adhesive labels and narrow-web materials. The machine was manufactured in 2016 and offers a compact yet highly functional configuration for professional label production. With a working width in the 320 mm class, servo-controlled web transport, register-controlled die-cutting, and several winding positions, the machine represents an attractive solution for label converters looking for a flexible finishing system for digitally or conventionally printed label material. The machine is currently installed and can be inspected by prior appointment. _____ MACHINE DETAILS Manufacturer: CMC Maschinenbau GmbH Model: PROFI-LINE R-320 Machine type: Rotary Die-Cutting / Label Finishing Machine Year: 2016 Machine No.: 100 586 Working width: approx. 320 mm Electrical supply: 400 V Frequency: 50 Hz Installed power: 20.5 kW Maximum machine speed according to machine plate: 90 m/min Machine weight: approx. 1,800 kg CE marked _____ DIE-CUTTING SYSTEM The machine is equipped with a professional rotary die-cutting section suitable for the finishing of printed self-adhesive label materials. Visible equipment includes: • Rotary die-cutting station • Magnetic cylinder system • Counter-pressure cylinder • Adjustable die pressure • Heavy-duty die-cutting frame • Servo-controlled material transport • Register-controlled production • Suitable for printed label webs • Matrix / waste separation The machine is particularly suitable for the finishing of digitally printed labels where precise die-cutting registration is required. _____ REGISTER CONTROL The machine is equipped for register-controlled operation, allowing the die-cutting process to follow pre-printed material. This makes the machine suitable for: • Digital label production • Flexographically printed labels • Pre-printed self-adhesive materials • Short- and medium-run label finishing The servo-controlled system helps maintain stable web positioning during production. _____ WEB HANDLING The machine is equipped with an extensive web path and several web-handling components. Visible on the machine: • Electronic web guiding system • Web guide sensor • Multiple guide rollers • Controlled material feed • Adjustable web tension • Pneumatic shafts • Several rewinding / waste winding positions The web guiding system contributes to precise material alignment before and during the die-cutting process. _____ UNWINDING The machine includes a professional unwind section for roll-fed production. Kedpfoz Ea N Rsx Ahaenc Features visible on the machine include: • Pneumatic unwind shaft • Roll-fed material handling • Controlled web tension • Adjustable web path • Material guiding system The machine is suitable for typical labelstock, paper and film-based self-adhesive materials. _____ REWINDING

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Mark Andy Digital Pro3 PLUS Hybrid Digital Printing Machine with Semi-Rotary Die-Cutting Unit Installation: April 2024 Running meters: approx. 96,000 linear meters from April 2024 to April 2026 Web width: 330 mm Digital print width: max. 318 mm Flexo print width: max. 330 mm Digital resolution: 1200 x 1200 dpi Digital printing speed: approx. 23.5 m/min Digital printing: 4 colors Flexo printing: 2 flexo units Flexo drying: air-cooled LED UV Materials: BOPP, PET, PP, paper Digital Front End / RIP: PDF workflow Power supply: 240 V, 50–60 Hz Configuration and equipment: Mark Andy Digital Pro3 PLUS hybrid digital press 2 flexo printing units Semi-rotary die-cutting unit Knodpfx Asy Ul I Ajhasc Latest generation flexo printing stations Semi-rotary die-cutting, expandable Unwinder for laminate / KP available Bypass for “flexo only” production or blank labels available Rewinding system Air-cooled LED UV drying PDF digital workflow Suitable for roll-to-roll label production Accessories included: 2 x printing cylinders: 80Z and 96Z 1 x Spilker Airboy Further accessories according to final confirmation Technical highlights: The machine offers a strong combination of digital printing, flexographic printing, and semi-rotary die-cutting in one compact production line. The uploaded technical specification confirms a maximum web width of 330 mm, a digital print width of 318 mm, 1200 x 1200 dpi resolution, and a digital production speed of 23.5 m/min. The layout drawing shows a complete production concept with unwind, semi-rotary die-cutting section, print station, digital engine, and rewind system, making the machine suitable for efficient short-run and medium-run label production.

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder Knjdpfozqnxtsx Ahaoc 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: used, Year of construction: 1996, Technical Specifications: • Working width: 1050 mm • Unwind diameter: 1250 mm • Rewind diameter: 800 mm • Shaftless unwinder • Shear cutting system Knedpfez Erq Hjx Ahaoc • Pneumatic knife holders • Fully automatic knife positioning • Turret rewinder with automatic roll removal • 3” friction shaft • Generator brake on unwinder • Unwind tension control via dancer roll system • Web edge control Equipment & Features: • Labeling device • Vacuum splicing table • Siemens S7 control system • Removal stand with push-off device • Automatic roll removal

Condition: used, Year of construction: 2001, 8 colors Printing width (endless sleeves) Max.: 1270 mm Printing width (non-endless sleeves) Max.: 1250 mm Maximum mechanical machine speed: 460 m/min Gear pitch: 10 mm Printing length / repeat: 300–1200 mm Material width: max. 1320 mm Materials Suitable for processing: LDPE, PP, PA: 20–150 µm HDPE, OPP: 12–100 µm Laminated films: max. 120 µm Paper: 30–120 g/m² Unwind / Rewind Maximum roll diameter, unwind: 1000 mm Maximum roll diameter, rewind: 1000 mm Core inside diameter: 76 mm Core outside diameter: 85 mm Maximum roll weight: 1240 kg Knodpfxszvfgfj Ahaoc Drying system Printing unit supply air: max. approx. 5,250 m³/h Printing unit fresh air: approx. 2,620 m³/h Bridge supply air: max. approx. 8,430 m³/h Bridge fresh air: approx. 2,150 m³/h Recirculated air: approx. 5,600 m³/h Supply air temperature, printing unit: max. 100 °C Supply air temperature, bridge: max. 120 °C Equipment / Features W&H Turboclean ink supply system Unwind and rewind units Drying system Corona treatment Operator control system Printing cylinders and accessories Anilox rollers Portalift system

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical Data Material: Printed or unprinted shrink films Film types: PVC, PET, OPS shrink film Film thickness: approx. 28–100 µm Minimum sleeve width: approx. 50 mm Maximum sleeve width: approx. 300 mm Maximum unwind diameter: approx. 600 mm Maximum rewind diameter: approx. 600 mm Sleeve width tolerance: approx. +/- 0.15 mm Outer web overlap: approx. 0–1 mm Glue position: Adjustable Maximum production speed: Up to 500 m/min Maximum sleeve roll weight: approx. 50 kg standard Power supply: 240 V / 50 Hz Compressed air: Minimum 6 bar, dry and oil-free, approx. 40 litres/min _____ Machine Configuration Based on available information, the machine is equipped with the following main units: Unwinding Section • Unwinding unit • Cantilevered unwind shaft • Pneumatic arm for supporting the master roll • Core adapter for 76 mm core diameter • Core adapter for 152 mm core diameter • Electromagnetic brake controlled by an ultrasonic sensor • Automatic web guiding with ultrasonic sensor Gluing / Solvent Application • Solvent application unit for gluing • Pressurized solvent tank • Speed-dependent glue quantity control • Adjustable glue seam position Sleeve Forming Section Kjdpfx Aezka T Aehaenc • Longitudinal pre-cutting / perforation unit with two perforation wheels • Semi-automatic forming tool for sleeve widths from approx. 50 to 300 mm • Adjustable guide rollers for sleeve forming • Roller sets for laying the film around the forming bar • DCM control system for sleeve width measurement Rewinding Section • Rewinding unit • Machine control cabinet • Touchscreen control

Year of construction: 2012, condition: used, Ratiostretch RS10/2 Kedpfx Ahek Abpleajnc RA1978 Height: 2540 mm Width: 1650 mm Turntable diameter: 1650 mm Length: 2600 mm maximum rewindable product weight:2000 kg maximum wrappable product height: 2330 mm maximum wrappable product basic dimensions 1100x1200 mm Turntable speed: 12 rpm (max.) / 3 rpm (min.) Lifting carriage speed: 4 m/min (max.) / 0.6 m/min (min.) Turntable height: 85 mm Voltage: 230V, 50Hz, 6A Year of manufacture 2012 weight: 480 kg Foil width: 450-500 mm Foil diameter: 240 mm Roll weight: up to 20 kg Foil thickness: from 7 µm Current mounting: embedded in floor, optional drive-on ramp available Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We are looking forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG

Condition: used, Year of construction: 2014, Folding machine MBO T700/4 Year: 2014 Description: - 4 page folder - MBO Navigator Feeder Kedpfxeyzdt Dj Ahaonc - Round pile feeder: R 700 - Pump Buckle folding unit: 1 MBO FP 10 - Automatic buckle plate adjustment - First buckle folding section with 4 buckle plates - Slitter shaft cassette - Perforating shaft - Anti noise hood(s) - Excluding delivery Max. mechanical speed: 30 - 230 m/min Maximum size range: 68 x 120 cm Minimum size range: 15 x 20 cm

Year of construction: 2008, condition: ready for operation (used), machine/vehicle number: LF 020, Min. / max. web width: 150 – 330 mm Min. / max. paper weight: 90 – 160 g/m² Max. unwind roll diameter: 1000 mm Kjdey Shztopfx Ahasnc Max. rewind roll diameter: 400 mm (300 mm when using the 3-shaft turret) Core diameter: Unwind: 76 mm / Rewind: 40, 45 and 76 mm (3 sets of 3 shafts) Max. speed: 200 m/min Description: Unwind with splicing tables and clamping devices, web guiding and tension control (including automatic web clamping during stop operation as well as dancer rollers), up to 12 rotary or 12 stationary knives within a pneumatically controlled slitting unit, edge trim extraction, interactive digital control panel with color touchscreen, program memory, settings management, counting functions (labels or running meters), and inspection control (missing label detection), fully automatic 3-shaft turret rewinder for non-stop operation. All required safety devices are installed on the machine.

Condition: used, Year of construction: 2013, General technical data: Knsdpfxjyplyae Ahasc Machine type: Flexographic printing press Web width: 530 mm Number of colors: 10 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • Turning bar • Delam/Relam unit – 1 color • Cold foil unit – 1 • Die-cut station – 1 • Master gap unit – 1 • Rewind shaft – 1 • 10 UV GEW lamps • 3 sets of sleeves • 10 anilox rollers • 3 magnetic cylinders

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. Knsdpfxov Hcwte Ahasc used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill

Condition: ready for operation (used), Year of construction: 1995, A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine. Knjdpfx Ahoyt N Dqoaec

Condition: ready for operation (used), Year of construction: 1996, A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible. Knsdpfxox I Rpro Ahajc

Condition: used, Year of construction: 2009, Folding machine MBO Navigator K800.2/6 S-KTL Year: 2009 Description: - 16 page folder - Pallet feeder: FP 120 - Pump: Year 2018 Kjdpsxg Nlmjfx Ahaenc Folding unit MBO K800.2/6 S-KTL - Parallel fold unit with 6 buckle plates - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hoods for upper folding buckles - Excluding delivery Max. mechanical speed: 10 - 180 m/min Maximum size: 780 x 1200 mm Minimum size: 170 x 250 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, TECHNICAL CONFIGURATION Printing and Drying • 6 flexographic printing units • UV drying system • Hot-air drying system • Combination of UV and water-based ink applications possible, depending on production requirements • Varnishing capability Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Adjustable turn bar system • Turn bar can be positioned flexibly between the individual printing units Converting Equipment • 2 rotary die-cutting stations • 1 die-cutting station equipped with a gap system • Slitting unit • Perforation unit • Inline finishing and converting capability Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration during production Included Accessories The machine is offered together with a selection of production accessories, including: • Magnetic cylinders Knjdpfx Ahoztqcmeajc • Printing cylinders • Anilox rollers A detailed accessory list can be provided upon request. _____ WHY THIS GALLUS EM 280?  Complete Inline Production Solution The machine combines printing, varnishing, die-cutting, perforating, and slitting in one production line. This allows finished labels to be produced in a single pass and reduces additional handling between production stages.  Flexible Six-Color Configuration The six flexographic printing units provide sufficient color capacity for a wide range of standard and premium label applications. The additional varnishing capability enables protective or decorative surface finishing.  UV and Hot-Air Drying The combination of UV and hot-air drying increases production flexibility and allows the machine to process different ink and coating systems.  Flexible Turn Bar System The adjustable turn bar can be positioned between different printing units. This offers additional flexibility for reverse-side printing, adhesive-side printing, and special multilayer label applications.  Two Rotary Die-Cutting Stations The two rotary die-cutting stations allow more complex converting operations to be carried out inline. One station is equipped with a gap system for improved adjustment and production accuracy.  Integrated Quality Inspection The camera inspection system supports continuous quality control during production and helps minimize waste caused by printing or registration errors.  Proven Gallus Engineering The GALLUS EM 280 is known for its mechanical stability, long service life, and straightforward operation. It remains a reliable production platform for medium-sized label converters, specialist applications, and international export markets. Very Well-Maintained Condition The machine is located in Germany and has been maintained in very good overall condition. Based on the available information, we rate the machine at approximately: Condition: ★★★★★☆☆ 8 out of 10 stars.

Condition: used, Year of construction: 1996, functionality: fully functional, Max. roll diameter: 1,300 mm Roll core: 76 / 100 / 152 mm (unwinding), only 152 mm (rewinding) 2 rotogravure stations + inline adhesive coating unit Drying: diathermic oil system, vertical + horizontal tunnels Cooling rollers after each station Control: Siemens S5, DC drives Processes: barrier coating, lamination (paper + aluminum/plastic), inline primer CE certified, incl. thermal oxidizer (RTO25) and steam generator (Ferroli) Kedpfx Ahjz It D Hjaonc

Condition: used, Used Machine Features and Technical Specifications: - High-performance multi-blade saw - Heavy-duty cast iron construction - Robust feed chain consisting of precision links connected directly to one another - Wear-resistant guide surfaces on the feed chain with an extremely low coefficient of friction - Automatic chain lubrication - 4-point saw shaft bearing arrangement for maximum stability - Saw sleeve with tapered seat and self-centering mechanism - 4 pressure rollers for precise cuts even with thin workpieces - 4 rows of slitter and deflector fingers - Cutting height up to 110 mm with a 350 mm saw blade diameter - Minimum cutting length 250 mm - Clamping width of the saw sleeve: 300 mm - Min. and max. saw blade diameters: 200/350 mm Knsdpfx Aszk N Ucjhaoc - Saw shaft speed: 4,200 rpm - Feed speed: 4–48 m/min - Conveyor chain width: 300 mm - Saw bush diameter (with 2 wedges, 20 x 5 mm): 70 mm - Work table height: 750 mm - Exhaust connection diameter: 200 mm - Airflow at 25 m/sec: 3,500 m³/h - Motor: 25 kW - Feed motor: 1.1 kW - With laser alignment beam - Sound emission: 98.3 dB(A) at idle without dust extraction - During operation: 107.1 dB(A) - Workplace-specific emission level: 81.8 dB(A) at idle without dust extraction - During operation: 91.2 dB W(A) - Dimensions: 170 x 140 x 190 cm - Weight: 1,800 kg

Condition: used, Year of construction: 2008, Technical data: Knjdpoxlrd Nofx Ahaoc Printing Section - 5 × UV Flexo Printing Units - 5 × UV Dryers - Web Inspection: BST PowerScope 300 – Web Inspection System Unwinder - Max roll diameter: 1250 mm - Heavy-duty construction with pneumatic shaft and web tension control - Integrated splice table and web guiding system Rewinder - Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module - Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) - Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section - 24” - Supports reprocessing or secondary processing of pre-printed materials Additional Modules - Ben Bunch 500 - Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) - Cross Cutting Cylinder (inline sheeting or perforation — precise longitudinal or transverse cutting) - Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Condition: used, Year of construction: 1995, Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Variable print repeat: 14”–26” Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct Ksdpfx Aozzaz Ushaonc 24” printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind shaft • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening Die Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and perforation station including: o Common paper infeed with pull wheels o Length perforation o Space for two file-hole groups o IMR block with duplex sprocket punching (245–485 mm) o Pile marking device o Length slitting o 24” file-hole punch unit o Common anvil cylinder for two cross-perforation cylinders up to 28” o Variable zig-zag folder (5”–16”) o 2 × 24” cross-perforation cylinders Control & Equipment: • Main drive motor frame • Press control panel • Main electrical cabinet • Plate bender

Year of construction: 2004, condition: ready for operation (used), Max. web width: 330 mm Min. / max. paper weight: 90 – 160 g/m² Knedpfxoy Shz Ho Ahasc Max. unwind roll diameter: 700 mm Max. rewind roll diameter: 400 mm Core diameter: Unwind: 76 mm / Rewind: 76 mm Max. speed: 230 m/min Description: Unwind unit, splicing table with clamping device, web guiding and web tension control (including automatic web fixing during stop operation), single punching station (no tools included) with rewind for the punching grid, up to 12 slitting knives in a cutting unit with separators for slitting and/or longitudinal cutting of the rolls, extended operator panel for settings, counter (labels or meters) as well as inspection control (missing label detection) with visual check, 2 driven rewind shafts for fast and efficient production. All safety devices are installed on the machine.

Year of construction: 1970, condition: ready for operation (used), A complete extrusion line with a Reifenhäuser extruder and a gravimetric system Plast-Control (2006) is available. 1) Unwinder 1. 2) Primer unit and hotmelt unit for water-based adhesive lamination. 3) Dryer. 4) Unwinder 2. 5) Dolci extruder for extrusion lamination. 6) Unwinder 3. 7) Two printing units with additional dryer. 8) Extruder Reifenhäuser. 9) Rewinder. 10) Guide roller in the basement. 11) Web guiding under unwinder 1 in the basement. 12) 2x resin silos in the basement. This is a complete extrusion line with peripheral equipment. Documentation available. An on-site inspection is possible. Knodpsw R Dhrefx Ahasc

Condition: good (used), Year of construction: 2019, XEIKON CX3 Manufacturer: Xeikon  Model: CX3  Technology: Dry toner digital printing  Year of manufacture: 2019  Counter reading: 23,840,536 A3 prints  Machine condition: Very good, currently in production Web width and format  Maximum web width: approx. 330 mm  Maximum print width: approx. 322 mm  Format: roll-to-roll Knodpfxeyhpyzj Ahaoc Speed and productivity  Maximum printing speed: up to approx. 19.2 m/min  Productivity: up to approx. 1,540 m²/hour (depending on job and coverage) _____ Technical configuration (as visible and confirmed) • Xeikon CX3 digital color printing engine • Integrated unwinder • Integrated rewinder • Roll-to-roll configuration • 5th color unit – White • Additional special colors available: Blue and Orange • Continuous manufacturer service contract in place • Machine currently running in production _____ Electrical data (according to nameplates) • Power supply: 3-phase, 220–240 V / 380–415 V • Frequency: 50 / 60 Hz • CE compliant _____ Included equipment • Unwinding unit • Rewinding unit • Digital front end and control panels • Safety systems and emergency stops • All standard accessories installed on the machine _____ Operational status • Machine is fully functional • Currently in operation • Regularly maintained under manufacturer service agreement _____

Condition: used, Year of construction: 2007, General Information • Machine type: Modular flexographic printing and converting press • Maximum printing width: 510 mm Printing Units Number of printing units: 3 Drive system: Dual drive per printing unit Printing technology: Flexographic Plate cylinder pitch: 1/8" Plate Cylinders (1/8") • 3 × Z88 • 3 × Z92 • 3 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 3 × Z140 Die-Cutting Units Number of die-cutting stations: 3 Counter-pressure cylinders: 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) Magnetic Cylinders (1/8") • 2 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 4 × Z140 • 3 × Z176 • 3 × Z184 • 2 × Z192 • 1 × Z222 Anilox Rollers Total anilox rollers: 13 Volumes (cm³/m²): 4.1 / 5.04 / 6 / 6 / 6.3 / 6.09 / 8 / 8.25 / 9.58 / 13 / 13.51 / 16.57 / 30 • 2 new anilox rollers included Coating & Special Units • Sleeve holders for varnishing: - 3 × sleeve holders Z88 - Including mounting station • Screen printing unit • Laminating station Drying Systems UV systems: 3 × UV units Uviterno, 240 W/cm NIR drying: 2 × NIR modules for water-based systems (Lambda Technology) Web Handling & Rewinding Grid winders: 2 × rail-mounted grid winders (up/down) Rewinder: Double-spindle rewinder for roll-to-roll operation Delivery: Conveyor belt for single labels Web cleaning system Complete set of non-stick rollers Corona & Web Guiding Corona treater: 2 kW (SIT) Web guiding system: • Erhardt+Leimer (E+L) • 2 × ultrasonic sensors • 1 × line sensor Kedpfjx Ngflex Ahasnc Inspection & Register Control Video inspection system: E+L Elscan Register control: • Sensotec • Register control for 5 stations (3 printing + 2 die-cutting) Inserter control for pre-printed rolls