Used Strapping Machine for sale (84,701)

Condition: good (used), Strapping machine, packaging machine -Through hole: 500 x 500 mm -Strapping band: 5 mm -Core diameter: 60 mm -Coil width: 120 mm -Pressing the pedal triggers the automatic strapping. Knjdpfx Aob A Ibcogzof

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and from the price that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Kodpst Uzv Tefx Agzsnf Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: good (used), Year of construction: 2011, Strapping machine Mosca SONIX-MP / RO-M-Fusion, year of manufacture 2011, in good condition, immediately available. We also have other Mosca machines in stock. If interested, we are happy to provide information about additional machines available at our facility. You are welcome to inspect the machine at our site by prior appointment. Knsdovx Rgajpfx Agzof

Condition: good (used), ErgoPack 726X X-Pert Pallet Strapping Machine with Gate A device for strapping loads with PP and PET straps. Manufactured in 2022. Very good condition. The 726X model features a heat sealer and a „tail” that passes through the pallet and feeds the strap to the operator without bending. Additionally, the machine is equipped with a module for tall pallets, known as a gate. Manufacturer’s description: The ErgoPack 726X is used to strap almost any type of load using PP (polypropylene) or PET (polyester) strap. The device is fully automatic (tensioning, sealing, and cutting the strap). It is characterized by high efficiency and ease of use, ensuring excellent results with minimal physical effort. The device is controlled from a control panel. Knjdpfx Agjx Nct Ejzsf

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 109292, conveyor belt width: 650 mm, total width: 1,100 mm, total height: 1,500 mm, total length: 1,800 mm, overall weight: 400 kg, input voltage: 240 V, table height: 800 mm, working height: 800 mm, input current: 3 A, ISC Recycle offers a used MOSCA Sonixs-TR-6 Pro automatic strapping machine, sold as is. This industrial machine is designed for automatic strapping of cartons, parcels, and single-unit loads. It is particularly suited to logistics, industrial, and order preparation environments requiring reliability, consistency, and improved productivity. - Brand: MOSCA - Model: Sonixs-TR-6 Pro - Type: Automatic strapping machine - Serial number: 109292 - Strap width: 8 mm Kjdpfx Aex I Naisgzjnf - Intermediate roller table: approx. 800 mm - Year: 2015 - Power supply: 100–240 V / 50–60 Hz - Condition: Used – sold as is Advantages: - Fast and precise automatic strapping - Robust construction for heavy-duty use - Suitable for logistics and industrial lines - Efficient solution to optimize packaging and shipping - Quantity available: 1 unit - Price: €9,425 excl. VAT Availability: Immediate

Condition: new, Year of construction: 2025, Automatic strapping machine for 100% recyclable paper strap, compatible with PP strap, strap width 5, 8, 9 or 12 mm, arch size 550 x 400 or 650 x 500 mm, speed 55 cycles per minute, automatic strap feeding and ejection, tension adjustable via potentiometer. Knjdpfx Ajx Hvu Rsgzof

Condition: good (used), Year of construction: 2013, Professional strapping machine with internal frame dimensions of approximately 1050 mm width x 800 mm height, manufactured by a renowned company, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward spool change and threading system. - Band width as per manufacturer’s specification from 8 to 19 mm; machine is fitted with a 12 mm strap roll. - Up to 24 strapping cycles per minute possible. - Adjustable strap tension from 50 to 1200 N. - Manual start via hand button or durable foot switch / alternatively, automatic operation selectable (sensor in tabletop). Kedpfxjx Nf Avs Agzjnf - Equipped with ergonomic rollers on the tabletop. - Sealing method: heat sealing. - Automatic strap feed. - Machine is movable on casters. - 230 V / 50 Hz. - Documentation includes operating manual, spare parts lists and circuit diagrams. The machine can be demonstrated under power.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 223A011643003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-12 mm Year: 2016 Machine-No.: 223A011643003 Condition: Refurbished Features: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap control ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional ⦁ DAT Direct-Access-Technology Torque-controlled retraction force, adjustable Kedpfx Agsukvgrjzenf ⦁ Adjustable transport speed ⦁ Machine mobile ⦁ Table height continuously adjustable ⦁ Package flow monitoring Special features: • Right machine (viewed in the direction of conveyance) • EMERGENCY STOP button in the Easy Control control unit • Signal exchange: 2 x mating connector with tool • Additional light barrier for attachment to the front or rear conveyor • Signal exchange: Do not strap the package. To the front-running machine • External button: Do not strap the package • Strap tension dependent on the package height (laser sensor) • Pneumatic package press (600x600) • Double press beam 600 • Feed protection on the table top, inlet side

Condition: used, Automatic packing machine Manufacturer : MAIR Model : .90.D.5.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE/M/TS-31 J-WILT/4MR Working range Kodpfx Aovtp Hbjgzonf Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 3,5 - 10 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/5/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3,5 – 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 3 Tn

Condition: good (used), Year of construction: 2002, functionality: fully functional, Mosca Bundle Strapper – PD-TRC-3 (2002) Knjdpox Ekvtofx Agzef Professional strapping machine for bundling cardboard stacks, die-cut sheets, or bale support. Key Features: • 415V 3-phase motor • Automatic arch strapper • German-built reliability • Ideal for end-of-line packaging • Working when removed Price: £4,500

Condition: good (used), Year of construction: 1997, I will sell Mosca RO-M-P2, good condition. Ksdev Uphuopfx Agzonf

Condition: used, Year of construction: 2007, functionality: fully functional, Mosca strapping machine for strapping printed products Ksdpfxex Il Ehs Agzenf

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, year of last overhaul: 2025, Mosca ROM Fusion, arch size 600 x 500 mm, 5 mm PP strap, activation by button or pedal, throughput 55 to 60 cycles per minute, automatic strapping feed and ejection, electronically adjustable strap tension, brushless drive system without belts or chains, 180° rotatable control panel. Several machines available with single or double pedal. Knodpfx Agswvabyjzof

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 410B010616003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616003 Year of manufacture: 2006 Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Kedpowcq E Asfx Agzenf Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) ⦁ Strap scanning ⦁ Strap ejector ⦁ Strap infeed, automatic ⦁ Strap cutting blade ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: EXS-128, overall weight: 170 kg, total length: 111 mm, total width: 60 mm, input voltage: 230 V, input frequency: 50 Hz, workpiece weight (max.): 170 kg, 🔹 General Information Brand: ITT Jetpak Model: EXS-128 Type: Strapping Machine (Band Binding Machine) Year of Manufacture: 2013 Serial number : S14075818 🔹 Technical Specifications Strapping Method: Semi-automatic banding/strapping machine Strap Type: Polypropylene (PP) strap Strap Width: 9mm – 15mm Tension Range: 7– 70 kg Cycle Speed: Approx. 28 straps per minute (50 Hz) Maximum package size: Standard arch: 850 (Width) x 600 mm (height) Ksdpsv Eczpsfx Agzonf 🔹 Physical & Power Details Machine Dimensions (LxWxH):111 × 60× 150 cm Weight: 170 kg Table Height: Standard working height (approx. 836 mm) Input Voltage: 220V / 1PH (single-phase) Power Consumption: 0.6 kW Rated Power : 2.7 A 🔹 Key Features ✅ Fully automatic: strapping, tensioning, welding and cutting done automatically when package placed and start button pressed. ✅ Adjustable Tension: Ensures secure bundling for various package sizes ✅ Easy to Use: User-friendly control panel for simple operation ✅ Durable & Reliable: Designed for continuous operation in industrial settings ✅ Compact Design: A Space-saving machine suitable for different work environments Safety/Controls : Includes emergency stop, main power switch, and proximity/foot-pedal option 🔹 Typical Applications Logistics & Warehousing: Carton bundling, securing parcels Manufacturing & Production: Strapping product batches for transport Printing Industry: Binding newspapers, magazines, and print materials Retail & Packaging: Securing goods for storage and shipping

Condition: good (used), Year of construction: 2011, functionality: fully functional, • Model: Humboldt HU 702 • Year of manufacture: 2011 • Machine number: 11049896 • Machine type: Strapping machine • Application: Automatic strapping of cartons, packages, and printed materials • Features: - Reliable fully automatic strapping system - High throughput for fast packaging processes - Precise and secure PP/PET strap tensioning - Robust construction for continuous industrial operation - User-friendly control and maintenance system • Application areas: Printing houses, logistics, packaging, shipping, post-processing Kodpjx Aig Nsfx Agzjnf • Condition: Standard machine

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, workpiece length (max.): 5,600 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 600 mm, No reserve price – guaranteed sale to the highest bidder! Kedsxw U U Ujpfx Agzjnf TECHNICAL DETAILS Max. workpiece width: 2,100 mm Max. workpiece length: 5,600 mm Max. workpiece height: 600 mm

Condition: used, Year of construction: 1998, functionality: fully functional, Mosca strapping machine RO-M-P2 for bundling printed products Kjdpsx Il D Rjfx Agzjnf

Condition: used, Year of construction: 2015, functionality: fully functional, For sale is a maturation unit from the manufacturer Brüning Haus, year of manufacture 2015. Equipped with powered roller conveyors before and after the machine. The machine is used and sold without warranty. Knedoxy Nunjpfx Agzef

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 410B010616004, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616004 Year of manufacture: 2006 Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) Kodpfx Ajwd I Idjgzjnf ⦁ Strap scanning ⦁ Strap ejector ⦁ Strap infeed, automatic ⦁ Strap cutting blade ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: ready for operation (used), Year of construction: 2016, Offered is a fully automatic strapping machine for PP strap, year 2006. The machine has defects. Electronic strap tension control 50-450N, polypropylene (PP) strapping band width: 12mm, core diameter X/Y 200mm/280mm, heat-seal joint, cycle performance 30 strappings/min, package dimensions X/Y: min approx. 100mm/30mm, machine dimensions X/Y: 1450mm/600mm, working height: 800mm, weight: approx. 220kg. Inspection possible by arrangement. Knedpfoxy R D Rex Agzef

Condition: used, Year of construction: 2003, The binding machine is suitable for binding long bar materials, long joined materials and materials with elastic or simple plastic wire. Long materials can be pushed through a tunnel in the middle of the machine. The binding machine can bind long materials together by knotted loops. Dq98On The machine is suitable for binding single and double strings. The binding machine can add any number of loops to long materials. The elastic cord keeps the joined materials together during transport. Kjdpfx Asvyhmtogzonf

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 112A011713008, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 112A011713008 Year of construction: 2017 for parcels max. 600 mm width x 600 mm height 12-month guarantee (excluding: machine control, travel costs and wear and tear) Properties / features: - ASLF anti-strap loss function permanent strap control - Automatic tape feed - Strap width 5 - 12 mm, optional - Operator terminal with soft tension button - DAT Direct-Access-Technology - Torque-controlled retensioning force, adjustable - Single item strapping - Foot switch on the operator side - Mobile machine Kjdpfx Agewclgnezjnf - Table height infinitely adjustable - Table top hinged at the front and removable at the rear - Machine colour: Frame RAL 7004 / Frame RAL 7016 - Internal strapping coil - Mains connection at the top - Strapping tape 5x0.47mm, white, 7000 m/coil, polypropylene DIN EN 13 394 The machines are delivered with this strap, the remaining strap is included. - Table top front 600, hinged - Rear table top 600, screwed

Condition: used, Year of construction: 2004, The binding machine is suitable for binding long bar materials, long joined materials and materials with elastic or simple plastic wire. Long materials can be pushed through a tunnel in the middle of the machine. Knedpfx Agsvyhl Nozef The binding machine can be used to bind long materials together using knotted loops. The machine is suitable for binding single and double strings. The binding machine can be used to attach any number of loops to long materials. The elastic cord holds the joined materials together during transport.

Condition: good (used), Year of construction: 2004, The binding machine is suitable for binding long bar materials, long joined materials and materials with elastic or simple plastic wire. Long materials can be pushed through a tunnel in the middle of the machine. The binding machine can be used to bind long materials together using knotted loops. The machine is suitable for binding single and double strings. Kedpfx Agevyhhqozsnf The binding machine can be used to attach any number of loops to long materials. The elastic cord holds the joined materials together during transport.