Used Surveillance Monitors for sale (4,433)

Condition: not inspected (used), Year of construction: 2008, operating hours: 32,164 h, functionality: unexamined, machine/vehicle number: 3201250, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, workpiece length (max.): 2,695 mm, workpiece width (max.): 1,524 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item between 23/03/2026 and 27/03/2026! The machine is also equipped with a cutting function (see pictures)! TECHNICAL DETAILS Maximum tensile strength stainless steel: 600 N/mm² Sheet thickness stainless steel: 0.5 mm – 1.25 mm Typical sheet thickness stainless steel: 1.0 mm Maximum tensile strength steel: 410 N/mm² Sheet thickness steel: 0.5 mm – 2.0 mm Typical sheet thickness steel: 1.5 mm Maximum tensile strength aluminium: 265 N/mm² Sheet thickness aluminium: 0.5 mm – 3.0 mm Typical sheet thickness aluminium: 1.5 mm Sheet dimensions Length: 405 mm – 2,695 mm Width: 190 mm – 1,524 mm Maximum diagonal: 2,800 mm Maximum centering dimension: 2,500 mm MACHINE DETAILS Hydraulic System Base machine oil capacity: approx. 500 dm³ Shear lift table oil capacity: approx. 20 dm³ Cooling System (Closed) Cooling unit R81: approx. 175 liters Cooling unit R101: approx. 260 liters Service Connections Mains voltage: 400 V Frequency: 50/60 Hz Connection cross-section: 4 × 25 mm² Pre-fuse: 80 A Average current: 42 A Power consumption: 24 kW Control voltage: 24 V AC/DC Industrial PC / Monitor / Power supply units: 220 V AC Open Cooling System Cooling water requirement: approx. 2.0 m³/h Max. inlet temperature: 20 °C Compressed Air Required pressure: 6 – 12 bar Max. air consumption at 6 bar: approx. 2,275 Nl/min Dimensions & Weight Required space (L × W × H): approx. 18,000 × 11,500 × 3,500 mm Transport width: Up to approx. 3,000 mm Nsdpfx Aeycqucjg Iswc Total weight (without oil): approx. 27,760 kg Heaviest component (bending machine): approx. 20,040 kg Operating hours: 32,164 h Robot Manufacturer: KUKA Model: KR 150 L110-2 2000 Year of manufacture: 2008 Weight: 1,285 kg Note: Robot has been modified for use with a magnetic lifter SCOPE OF DELIVERY Available manuals Various spare parts in wooden crates

Year of construction: 2021, operating hours: 5,797 h, condition: ready for operation (used), This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Njdpfjx D Rlpjx Ag Iowc Additional information • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS present

Year of construction: 2015, condition: ready for operation (used), injection weight: 2,424 g, This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine. Additional equipment • Mold Dehumidifier: Incl. hood, spare parts package, piping • Conveyor Belt: Two-sided preform filling system for cartons/grid boxes Machine Benefits Technical Machine Benefits • The package includes two machines along with additional components such as pellet silos, pellet feeder, discharge system for foreign bodies in pellets, dosing unit for color, and platform. Everything seen in the pictures is included. • Max throughput: 390 kg/h pet • Clamping unit: fully electric with toggle drive • Clamping platen: movable, guided on rollers • Type: split version • Dryer: dr815ht-g3 with 4000-liter drying hopper (stainless steel, insulated) • Husky 1: 3 tools - 28 gauge muzzle, 17. 8/26/30. 3 grams • Husky 2: 2 tools - 38 gauge muzzle, 18/29 grams Extra Information Clamping Force Clamping Unit: Fully electric with toggle drive Nodex D Hvwjpfx Ag Ijwc Clamping Platen: Movable, guided on rollers Control Unit Control System: Integrated control system for additional equipment Display for Mold Cooling Water Temperature/Pressure (Flow and Return) Control Output for Color Dosing Unit Lubrication System: Automatic Post-mixing Device: Integrated in the nozzle Tools 48-cavity H-PET Injection Mold Preform Weight: 17.8 g and 30.26 g Punch Size: 50 x 140 mm Includes: 3-position removal plate, basic spare parts package 32-cavity H-PET Injection Mold Preform Weight: 18 g and 29 g (38 mm Bericap) Punch Size: 63.5 x 140 mm Includes: 3-position removal plate, basic spare parts package Functions Temperature Monitoring and Setting Continuous Level Meter Variable Dew Point Setting Conveying: Hot transport of the granulate via vacuum unit P07 to the booster hopper (HAD400) Paint Mixing Units For Solid Paint: Volumetric, 4 dosing screws For Liquid Paint: 4 dosing pumps Preform Production Specifications Preform Weight: 17.80 g Mouth: PCO1881 LW Length: 89.35 mm Wall Thickness: 3.06 mm Base: 2.30 mm Shape: Bell Cavities: 48 Cycle Time: 12.4 ±0.3 s Preforms per Hour: 13935 Annual Production (95% availability): 111205000 Throughput (kg/h): 248 Power Consumption: 506 Wh/kg PET Preform Weight: 29.00 g Mouth: Bericap 38 Length: 108.59 mm Wall Thickness: 3.16 mm Base: 2.42 mm Shape: Bell Cavities: 32 Cycle Time: 13.7 ±0.3 s Preforms per Hour: 8409 Annual Production (95% availability): 67101000 Throughput (kg/h): 244 Power Consumption: 532 Wh/kg PET Preform Weight: 18.00 g Mouth: Bericap 38 Length: 82.04 mm Wall Thickness: 2.70 mm Base: 2.20 mm Shape: Bell Cavities: 32 Cycle Time: 11.3 ±0.3 s Preforms per Hour: 10195 Annual Production (95% availability): 81353000 Throughput (kg/h): 184 Power Consumption: 506 Wh/kg PET Preform Weight: 30.26 g Mouth: PCO1881 LW Length: 122.30 mm Wall Thickness: 3.00 mm Base: 2.30 mm Shape: Grade Cavities: 48 Cycle Time: 14.7 ±0.3 s Preforms per Hour: 11755 Annual Production (95% availability): 93805000 Throughput (kg/h): 356 Husky1 PCO 1881 30,3g 1-1,5l PCO 1881 26,0g 1-1,5l PCO 1881 17,8g 1-1,5l Husky2

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 9, This 9-axis TRAUB TNL 32 swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 swiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation Nwjdpex D Drcjfx Ag Iec • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: Connection D 150 mm for central extraction Additional equipment • None specified (no robots, bar feeder, chip conveyor, or external automation listed)

Condition: ready for operation (used), Year of construction: 2023, controller manufacturer: KUKA, controller model: smartPAD, number of axes: 6, This 6-axis KUKA KR 10 R1440-2 robot arm manufactured in 2023 features a payload capacity of 10 Kg and a range of 1440 mm. It includes a KUKA KRC4 compact control cabinet, smartPAD teaching pendant, and various interfaces for enhanced functionality. Ideal for tasks requiring precision and flexibility. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 10 R1440-2 machine we have for sale. Contact us for more information about this machine. Nwedex R E Stspfx Ag Ioc Additional equipment • Transfer gripper and support contour with integrated vacuum feedthrough • Bellows suction cup, lifting plate • Parallel gripper, terminal box • QC 90 quick-change system, pneumatic coupling • Robot 3D energy chain • Documentation in German and English Machine Benefits Qualitative Machine Benefits • Range of 1440 mm • Different transfer systems for various tasks Technical Machine Benefits • Compact plug-in control cabinet with kuka smartpad teaching pendant • Selogica programming interface in german and english • Fixed stops to limit the workspace • 4 x vacuum equipment (venturi principle) with blow-off function • 4 x 5/3 pneumatic valves with vented center position • 4 x 5/3 pneumatic valves with locked center position • 2 x eight freely programmable inputs for polishing with gripper-side sensors • Pneumatic maintenance unit with compressed air monitoring • Device interfaces for peripheral control • Payload capacity of 10 kg Extra Information Machine still under power

Year of construction: 2006, condition: ready for operation (used), This EUBAMA S6 rotary transfer was manufactured in 2006. It features a robust base frame, hydraulic fittings, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. Ideal for precision, it also includes a face turning head and a length control system with a pneumatic cylinder and laser. Contact us for more information about this machine. • Base frame • Accessories for base frame • Hydraulic fittings • Unit carrier (left) TK420 • 108 bores • Pipe (coolant return) • Flange shaft with face gearing • Stöber servo motor with planetary gearbox • Limit switch monitoring • Protective hood • Form turning unit - material guide • Guide axis • Cover plates with empty stations • Milling unit with NC feed • Clamping with toothed belt pulley z1=16 • Toothed belt pulley Z1=16 • Toothed belt pulley Z2=20 • Toothed belt 25 AT10 / 730 • Hydraulic power unit 70 100 04358 32 dm³/min • Central lubrication • Deflection plate T - T Additional equipment • Part ejection console • Straightening and feed rollers • Clamping change parts station 1 Nwedpfx Agex D If Te Ijc • Tools and tool holders • Operating tools S6 • Ejector with gripper • Clamping jaws (plates) • Press-in unit for internal hexagon socket • Face turning head PCD 100-01-101 • Length control with pneumatic cylinder and laser • Reel support (Star cross) • Extension (coil height) • 2-jaw chuck • Pneumatic accessories (for 4 cylinders) • 24-volt filling unit integrated with emergency stop valve • DA 300 compressed air maintenance system

Condition: ready for operation (used), Year of construction: 2022, operating hours: 123 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK One 828D, table width: 650 mm, table length: 850 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, This 3-axis DMG M1 vertical machining center was manufactured in 2022. It features a Siemens SINUMERIK One 828D control, a spindle speed of 12,000 rpm, and a table size of 850 x 650 mm supporting up to 600 kg. Equipped with a 24-place tool changer and both internal and external cooling systems, it ensures precise milling operations. If you are looking to get high-quality milling capabilities consider the DMG M1 machine we have for sale. Contact us for more information. Additional equipment • Automation interface with 6-axis robot, high dynamics • Siemens PLC and HMI with safety module Nwodpsx D Rw Eefx Ag Iec • IDS industrial camera with Halcon Vision integration Machine Benefits Qualitative Machine Benefits • Schunk clamping technology Technical Machine Benefits • Operating unit: handwheel + touch panel • Spindle cooling: water-cooled, temperature monitoring • Cooling lubricant: internal & external cooling, 20 bar • Chip conveyor: left-sided, belt conveyor • Pneumatic system: integrated with external pressure gauge field • Led work area lighting • High-precision 3-axis cnc machine with automation preparation • Compact footprint • Ideal for precise milling, manual or automated • Renishaw tool and workpiece probe Extra Information Machine still under power

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details measuring range X-axis 400 mm measuring range Y-axis 400 mm diameter max. 350 mm weight of the machine ca. 420 kg dimensions of the machine ca. 1,23 x 0,75 x 1,91 m Additional information Used Tool Presetter in very good condition. Checked by a service engineer from SPERONI. Test report available. Automatic measuring Pneumatically Activated Axis Movement Spindle Disk Brake Camera CCD LCD Monitor 22" Nwodoyml Rmopfx Ag Ioc Label Printer DYMO 1 off toolholder for HSK 32 Other tool holders in other sizes are available from the manufacturer. Axis Resolution 1µ Software: Speroni Pro Vision PC DELL Optiplex GX 745 – Pentium Dual-Core CPU E 5200 / 2,50 GHz, 1,00 GB RAM (PC was changed approx. 5 years ago) Optionally, the following adapter can be obtained from the manufacturer: ISO 40 holder HSK 63 A/C holder

Condition: used, mileage: 32 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,150 kg, first registration: 02/2026, emission class: euro6, color: white, number of seats: 9, total length: 5,050 mm, total width: 2,275 mm, total height: 2,040 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 34212 Subject to errors and prior sale! ---- OPTIONAL EQUIPMENT * Electrically adjustable, heated, and folding exterior mirrors * Electric tow bar preparation kit (wiring harness and tow module) * 2nd row windows: Quarter windows in the side windows * Ford Key Free system - including Ford Power start function * Lockable glove compartment with lid * 70 l fuel tank * Inductive charging station for mobile devices - Qi standard Nwjdpfx Aowi Df Ajg Isc * LED headlights - LED high beam - LED low beam - LED daytime running lights including integrated LED front indicators - Static cornering lights - High Beam Assist * Radio: Ford audio system with 13-inch multifunction display and Ford SYNC 4 including navigation - DAB/DAB+ - FordPass Connect - 13-inch TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink (wireless) and touchscreen - Amazon Alexa Built-in Voice Assistant ADDITIONAL EQUIPMENT * 2 grab handles on the driver and passenger side * 2-stage unlocking for the passenger compartment and cargo area * ABS (Anti-lock Brake System) * Electrically adjustable and heated exterior mirrors * Exterior mirror housings made of black-gray plastic * Rubber-coated floor, full-length * Roof console * Double rear door * Tachometer * Third brake light (with LEDs) * ESP - Hill Start Assist - Safety Brake Assist - Traction Control * Electric front windows with quick-down/up function for the driver's side * Electronic parking brake * FordPass Connect - Wi-Fi hotspot with 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Glove compartment with lid * Heated rear window - fixed * Rear window wiper * Interior lighting in the passenger compartment * Interior lighting, front * Automatic climate control, front * Cargo area lighting (LED) * Plastic steering wheel * Small center console * Driver Alert System * eCall Emergency Call Assist * Package: Technology Package 2 (Trend): Ford audio system with 13-inch multifunction display and Ford SYNC 4 - Camera-based Pre-Collision Assist - Driver Alert System - Traffic Sign Recognition System - Wrong-Way Driver Warning - Lane Assist including Lane Keeping Assist - Front and rear Parking Sensors - Cruise Control - Intelligent Speed Limiter with speed limit display - Rearview camera * Front and rear Parking Sensors * Diesel Particulate Filter (DPF) with SCR catalyst * Radio accessories: 10 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: 6.5 J x 16 steel wheels with 215/65 R 16 tires * Sensico leather-look gear knob * Rain-sensing windshield wipers * Headlights with LED low beam headlights - including high beam assist * Sliding door, right * Mud flaps, front and rear * Fixed side windows, third row, right and left * Fixed side windows, second row, right and left * Half-height side panel trim * Power steering * Front seat belts * Seats: Rear Seat Package 3 - 2nd row with 3 individual seats - 3rd row with 3-seater bench seat * Seat Package 11A: Driver's seat, 4-way manually adjustable - Passenger double seat, fixed - Driver and passenger headrest - Driver's lumbar support - Passenger airbag - Side airbags, right and left - Curtain airbags, front, right and left - Plus Style fabric upholstery, seat center panel in Black Onyx, rest in Ebony * Start-stop system * Power outlet: 12-volt connection in the cargo/passenger compartment * Front and rear bumpers partially in body color

Condition: new, Year of construction: 2026, functionality: fully functional, A multihead weigher is a highly precise weighing system that simultaneously weighs products on multiple load cells. The ideal combination is calculated automatically, ensuring the target weight is reached with minimal deviation. Multihead weighers are especially suitable for free-flowing products. When combined with a vertical packaging machine, they provide a continuous, automated packaging process. Multihead weighers reduce product loss through exact weight combinations and enable higher cycle rates, particularly for expensive or delicate products. Features - 10 to 36 heads available - Automatic frequency adjustment of vibration for uniform and precise product distribution - Automatic zero adjustment during operation for improved accuracy - Self-diagnostic alarm via popup window for easy troubleshooting - Option to select single or multiple drops for higher weights - Software-controlled side discharge for non-conforming weights, minimizing film and product waste - Live display of individual amplitudes for precise monitoring and control of each vibrator - Live display of individual weighing results - Centralized load cell feeding control replaces photoelectric sensor - Forced discharge function for frozen products to prevent melting when not selected - Weighing cells supplied by HBM Nwsdew Ekh Nepfx Ag Ijc - Program memory for parameter settings - Weigher available as a waterproof system at additional cost Technical Data - Max. speed: 60 weighings per minute (wpm) - Weight: 430 kg - Weighing range: 10–5,000 g - Accuracy: +/- 1.0–1.5 g - Hopper capacity: 1.3L, 2.5L, 4L & 5L - Control panel: 7'' touchscreen - Drive system: stepper motor - Level control: load cell - Surface: optionally stainless steel, surface-treated, or Teflon (other finishes on request) - Material: Stainless steel 304 - Connection: 220V / 50Hz

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Nwjdpfxjyl T U Ds Ag Ioc Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm Nedpfx Asx Nr Tueg Iswc • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data is based on the original order confirmation. The seller cannot guarantee that it matches the current condition. TECHNICAL DETAILS Nwodpfx Aeym Uu Usg Iec Load capacity: 12,000 kg at load center 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Lowered height: 4,895 mm Extended height: 8,100 mm Mast tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm STEINWEG Stone Clamp Type HG1T-6000S TECHNICAL DETAILS Clamping width: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Load capacity: 6,000 kg Double clamping bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in stable and clean welded construction Splayed clamping arms with rotatable mounting With hydraulic cylinders, required valves, lines and fittings Including oil pressure gauge and connecting hoses to the rotator Additionally: one pressure gauge mounted 180° opposite the standard gauge Load arm & extension TECHNICAL DETAILS Extension: 1.6–2.1 m Load capacity: 8,000 kg at outreach of 1.6–2.1 m EQUIPMENT 1 telescopic forklift jib, double-beam design, with infinite rotator and pendulum suspension Including connecting hoses to the forklift 1 hydraulic extension with extension cylinder 1 pair of stabilizers (2) for pendulum movement compensation Integrated sideshift with sliding guides, sideshift range: 250 mm Wireless Pressure Monitoring (Clamp Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30 °C to +85 °C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC System: Electronic control with 7" touchscreen Driver’s seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable sideways ADDITIONAL EQUIPMENT Front mud guards Rear mud guards External mirrors on high-mounted fenders Turbo II heavy-duty air filter Additional hydraulic function Quick couplings on carriage Accumulator/shock absorber 60 bar / 2 L in lift hydraulics Hydraulic oil tank pre-heating Additional LED headlights, 2 × on mast Reverse alarm LED beacon Electric cables above the mast Power connection 400 V, 3-phase Blue Spot lighting front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with speed boost EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/Analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Adjustable A4 writing surface LED reading lamp Diesel auxiliary heater + engine water heater Sun visor (roof/front) Panoramic rearview mirror Installation of attachments from other manufacturers Central lubrication system, basic version with 14 lube points

Condition: used, Year of construction: 2016, Automatic cutting table system for textile and leather Manufacturer: Atom Model: FlashCut Easy 222 Nwjdpfx Agjyf Euio Ioc Year of manufacture: 2016 CNC control Usable cutting/table area: 1,000 x 600 mm Maximum cutting height: 20 mm Static vacuum table with single-zone clamping High-performance vacuum turbine, 4 kW output Servo drive for X, Y, and Z axes Safety features with light curtain monitoring and emergency stop switch 1 high-intensity light projector Vacuum power: 4 kW Connected load: 6.5 kW 380 Volts, 3-phase, 50 Hz Compressed air: 6 bar, 200 l/min (when using pneumatic tool attachments) 9 bar, 400 l/min Software DXF converter for reading and converting CAD files Interactive layout software license Automatic nesting software license CAD software module for easy creation of geometries Multi-tool head, 20 mm cutting height Comprising 5 tools: 1x tool module for all cutting tools 2x punching modules with integrated extraction, punch diameter 1 - 8 mm Ink cartridge for applying markings 1x badge needle 1x laser pointer Machine dimensions: 1,600 x 1,235 x 2,190 mm Weight: 440 kg Reference no.: 9226

Condition: used, Year of construction: 2016, Automatic cutting table system for textile and leather Manufacturer: Atom Njdpfx Asyf Egxjg Iewc Model: FlashCut 2H 1660B UP Year of manufacture: 2016 CNC control Working area: 1,540 x 1,200 mm Cutting window: 1,540 x 600 mm Maximum cutting height: 20 mm Maximum traverse speed: 80 m/min Maximum acceleration: 1G Vacuum output: 1 – 8 kW Connected load: 5.5 kW 380 Volt, 3 phase, 50 Hz Compressed air: 6 bar, 200 l/min (when using pneumatic tool holders) 9 bar, 400 l/min Equipped with 2 independently operating multi-tool heads, each comprising: Tool module for all tool inserts Pen module for marking 2 punching tools with different diameters Minimum diameter: 1 mm Maximum diameter: 8 mm One needle Perimeter conveyor belt (feeds material into the working zones) Vacuum table divided into 300 x 300 mm quadrants High-performance vacuum turbine with frequency control up to 1 – 8 kW High-intensity projector Servo drive for X, Y, and Z axes Safety device with light barrier monitoring and emergency stop switch Machine dimensions: 2,210 x 2,506 x 1,841 mm Weight: 1,630 kg

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,300 kg, first registration: 02/2026, color: grey, number of seats: 9, total length: 5,450 mm, total width: 2,275 mm, total height: 1,981 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal Number: 49256 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Fixed tow bar * 2-zone automatic climate control with electric auxiliary heater * Heated steering wheel in Sensico leather-look * Adaptive matrix LED headlights - LED low beam incl. all-weather light - Glare-free LED high beam - LED daytime running lights incl. integrated LED front indicators - Static LED cornering light - Speed-dependent headlight range adjustment - LED taillights * Sliding doors, right and left * Technology Package 6: Exterior mirrors electrically adjustable, heated and foldable - Audio system with 13-inch multifunction display, Ford SYNC 4 incl. navigation - Blind Spot Assist incl. CTA rear cross-traffic brake assist - Pre-Collision Assist, camera and radar-based - Driver drowsiness alert - Lane departure, lane keeping, lane change assist, lane centering pilot - Traffic sign recognition - Wrong-way driver alert function - Park Pilot front/rear - Adaptive cruise control incl. Stop&Go function - Intelligent speed limiter with speed limit display - 360-degree camera ADDITIONAL EQUIPMENT * 2 grab handles on driver and passenger side * Two-stage unlocking for passenger and load compartment * ABS * All-wheel drive * Rubber flooring * Roof console * Double-wing rear door * ESP - Hill Start Assist - Emergency Brake Assist - Traction Control * Front electric windows with quick-up/down function * Electronic parking brake * Ford Power start function * FordPass Connect – WiFi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windscreen * Lockable glove compartment * Fixed heated rear window Nwedjyai R Rspfx Ag Ijc * Rear window wiper * Interior lighting in passenger compartment * Small center console * Driver drowsiness alert * Emergency call assistant eCall * Park Pilot front and rear * Particulate filter: Diesel particulate filter (DPF) with SCR catalyst * Radio accessories: 10 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 16, Trail design - double-spoke, matte black - with 215/65 R 16 C 109 T BSW tires * Column-mounted gear lever * Windscreen wipers with rain sensor * Front and rear mud flaps * Fixed side windows, second and third row, right and left * Black (plastic) side skirts with silver inserts * Power steering * Front seat belts * Seats: Rear seat package 3: 2nd row with 3 individual seats - 3rd row with 3-seat bench * Seat package 36: Driver's seat 4-way manually adjustable - Fixed double front passenger seat - Fold-out tray on passenger seat - Height-adjustable headrests - Heated seats for driver and (outer) front passenger - Driver's seat with adjustable inboard armrest - Lumbar support for driver - Passenger airbag, front side and curtain airbags - Feeltek imitation leather Trail upholstery * Start-stop system * Socket: 12-volt outlet in load/passenger compartment * Rear bumper – black (plastic) with silver insert * Front bumper – Trail design, partially painted in body color, with silver insert and Signal Yellow accents * Trail design decals in Signal Yellow accent color * USB port for the 2nd row * Recirculation heater * 4 lashing eyes * Immobilizer * Heat-insulating glass, medium tint * Central locking with remote control – includes second remote key ...and much more. ---- One owner. German specification. Errors and prior sale excepted.

Condition: used, mileage: 32 km, power: 171 kW (232.50 HP), fuel type: hybrid, gearing type: automatic, overall weight: 3,215 kg, first registration: 01/2026, color: black, number of seats: 8, total length: 5,050 mm, total width: 2,275 mm, total height: 2,008 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 22168 Errors and prior sale reserved! Nwjdjym Igqopfx Ag Iec SPECIAL EQUIPMENT * Electrically swiveling tow hitch * B&O Sound System with 15 speakers and up to 1000 Watts * 7.5 J x 19 alloy wheels in Active Design in Absolute Black * Heated steering wheel * Adaptive Matrix LED headlights – LED low beam incl. all-weather light – glare-free LED high beam – LED daytime running lights incl. integrated front LED indicators – static LED cornering light – speed-dependent headlight range control – LED rear lights * Exclusive package: Panoramic roof – Rear seat package 21 (6 seats, sliding doors right and left, 2nd row with 3 individual seats, outer seats heated, middle seat with storage table on backrest, 3rd row with individual seats) – 15 B&O speakers – Ambient lighting * Panoramic roof non-opening * Technology package 6: Exterior mirrors electrically adjustable, heated and foldable – Audio system with 13-inch multifunction display, Ford SYNC 4 incl. navigation – Blind spot assist incl. CTA rear emergency braking assist – Pre-collision assist, camera and radar based – Driver fatigue alert – Lane assist, lane keeping, lane change assist, lane pilot – Traffic sign recognition – Wrong-way warning function – Front/rear Park Pilot System – Adaptive cruise control, incl. Stop&Go function – Intelligent speed limiter with speed limit display – 360-degree camera – Sensico leather-look steering wheel ADDITIONAL FEATURES * 2 grab handles for driver and passenger sides * 3 USB ports for the 2nd row * ABS * Front storage compartment * Passenger airbag with deactivation function * Driver airbag * Battery: H7 AGM single battery * Roof console * Silver roof rails * Thatcham anti-theft alarm system with interior monitoring in cab incl. central locking plus double locking * Front power windows with quick up/down function * Electronic parking brake * Ford Key Free System incl. Ford Power start function * FordPass Connect – WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Glove compartment with lockable lid * Passenger compartment interior lighting * 3-zone automatic climate control – with automatic temperature control for driver, passenger, and rear, individually adjustable – auxiliary heating system – R-1234yf refrigerant – electric auxiliary heater – electric temperature control in the rear * LED rear lights * 1-phase charging cable, length: 5m * Inductive charging station in center console for mobile devices, Qi standard * Large center console * eCall emergency assistance system * Picnic light * Tire repair kit * Tire pressure monitoring system * Windshield wipers with rain sensor * Sliding door with pull-in aid * Sliding doors right and left incl. sun blinds for 2nd row * Rail-based flexible seating system * Fixed side windows, second and third rows * Seat package 29: Single front passenger seat manually adjustable in 4 ways – driver’s seat electrically adjustable in 5 ways – seat heating for driver and passenger – inner and outer armrests – lumbar support for driver electrically adjustable – lumbar support for passenger – passenger airbag – side airbags left and right – front head/shoulder airbags left and right. Part leather trim, fabric upholstery, synthetic leather/velour * Socket: 12-volt connection in passenger compartment * Carpet throughout vehicle * Front USB port * Tie-down rings

Condition: used, mileage: 32 km, power: 171 kW (232.50 HP), fuel type: hybrid, gearing type: automatic, overall weight: 3,300 kg, first registration: 02/2026, color: black, number of seats: 8, total length: 5,450 mm, total width: 2,275 mm, total height: 1,979 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Internal Number: 48217 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Trailer hitch, electrically swiveling * Heated steering wheel * Panoramic roof, non-opening * Radio: B&O Sound System with 15 speakers and up to 1000 Watts * Wheels: 7.5 J x 19 alloy wheels in sport design, matte black * Electric sliding door on right and left – with hands-free function and including sunshade blinds in the 2nd row of seats – Ford Key Free System (keyless entry/locking) including Ford Power Start function * Technology Package 6: Exterior mirrors electrically adjustable, heated and power-folding – Audio system with 13-inch multifunction display, Ford SYNC 4 including navigation – Blind Spot Assist including CTA reverse emergency braking assistant – Pre-Collision Assist, camera and radar-based – Driver fatigue alert – Lane departure, lane keeping and lane change assistant, lane centering pilot – Traffic sign recognition – Wrong-way driver warning – Park Pilot System front/rear – Adaptive cruise control including Stop&Go function – Intelligent speed limiter with speed limit display – 360-degree camera – Steering wheel in Sensico leather look FURTHER EQUIPMENT * 2 grab handles on driver and passenger sides * 2-stage unlocking for passenger and cargo area * 3 USB ports for the 2nd row of seats * ABS * Front storage compartment * Passenger airbag with deactivation function * Driver airbag * Battery: H7 AGM single battery * Roof console * Thatcham-approved anti-theft alarm system – with interior monitoring in driver’s cab and cargo area including central locking with double locking * Front electric windows – with quick up/down function * Electronic parking brake * FordPass Connect – WiFi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windscreen * GT stripes on the bonnet, lower front bumper and tailgate – including side decorative stripes * Lockable glove compartment * Heated rear window * Rear spoiler * Interior lighting in passenger compartment * Front interior lighting * 3-zone automatic climate control – with automatic temperature regulation for driver, front passenger, and rear, individually adjustable – with auxiliary heater – with R-1234yf refrigerant – Electric supplemental heater – Electric temperature control in rear * LED rear lights * LED headlights – LED high beam – LED low beam – LED daytime running lights including integrated front LED indicators – Static cornering light – High beam assist * Charging cable, single-phase, length: 5m * Inductive charging station in the center console for mobile devices * Large center console * Emergency call assistant eCall emergency system * Rear seat package 19: 6 rear seats, includes: 2nd row, 3 individual seats, center seat with folding table on backrest – 3rd row with 3 individual seats * Picnic lights * Tire repair kit * Tire pressure monitoring system * Windscreen wipers with rain sensor * Sliding door with power close assist Nwedpsx Sbbtofx Ag Isc * Rail-based flexible seating system * Fixed side windows, second and third row * Seat package 19: Driver's seat electrically adjustable in 5 ways – Passenger individual seat, manually adjustable in 4 ways – Heated seats for driver & passenger – Armrests inside and outside – Driver's lumbar support electrically adjustable & passenger manually – Passenger airbag, side airbags right and left, front head-shoulder airbags right and left – Partial synthetic leather trim Sport, seat center panel in Digital Aqua fabric, upholstery in synthetic leather/ve

Condition: used, mileage: 63 km, power: 100 kW (135.96 HP), first registration: 04/2024, fuel type: diesel, overall weight: 3,025 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal Number: 56467 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT - Airbag (passenger side) - Towbar preparation kit – Electrical preparation set for towbar – wiring harness, 13-pin socket and trailer module for retrofitting a towbar - Exterior mirrors, electrically adjustable, heated and folding – with integrated indicators - Rear window, fixed and heated – interior mirror – partition wall with window - Rear window wiper including washer nozzle and automatic activation when reverse gear is engaged Nwedpsqmcg Hsfx Ag Isc - Cargo area lighting (LED) – extra bright - Package: Cargo Area Protection Package – High sidewall paneling – cargo compartment lighting (LED), extra bright - Seats: Seat Package 11A – Driver's seat, 4-way manually adjustable – Double passenger seat with load-through flap, fixed – lumbar support for driver – Plus Style fabric upholstery, seat center section in Black Onyx, remainder in Ebony - Socket: 12-volt outlet in the cargo area (D-pillar) - Partition wall (metal) with window ADDITIONAL EQUIPMENT - 2-stage unlocking for passenger compartment - 6-speed gearbox - ABS electronically controlled with EBD - Driver’s airbag - Electrically adjustable exterior mirrors - Exterior mirror housings made of black plastic - Battery: H7 AGM single battery - On-board computer - Roof, flat - Roof console - Twin rear doors/180° (without window) - Rev counter - Third brake light - Electronic safety and stability system - Front electric window lifters - Electronic handbrake - FordPass Connect - Heated windscreen - Floor mats: rubber mats in front - Grab handles, driver and passenger side - Lockable glove compartment with lid - Front interior lighting - Automatic climate control, front - Headrests (3) - Fuel tank 55 l - Paint: solid color - Cargo area lighting (LED) - Steering wheel: plastic steering wheel - Small center console - Emergency call assistant - Package: Technology Package 2 (Trend) – Ford audio system with 13'' multifunction display and Ford SYNC 4 – Pre-Collision Assist, camera based – Driver fatigue alert – Traffic sign recognition system – Wrong-way driving warning – Lane keeping system incl. lane keeping assist – Park pilot system front and rear – Cruise control – Intelligent speed limiter with speed limit display – Rear view camera - Particulate filter: diesel particulate filter - Radio: Ford audio system with 13'' multi-function display - Radio accessories: 4 speakers - Wheel trims - Tire repair kit - Tire pressure monitoring system - Wheels: steel 6.5 J x 16 with 215/65 R16 R - Windscreen wipers with rain sensor - Headlights with LED low beam - Sliding door: sliding door on the right - Rear mud flaps - Front mud flaps - Power steering - Seatbelts - Start-stop system - Ford Power start function - Bumpers front and rear partially painted in body color - Partition wall (metal) without window - Door handles made of black-grey plastic - Door hinges, 90 degrees - Recirculation heater - 6 lashing eyes - Immobilizer - Heat-insulating, lightly tinted glazing - Central locking with remote control ...and much more. ---- First owner. German specification. Errors and prior sale excepted. 2 years manufacturer’s warranty from initial registration (can be extended upon request). We are happy to take your vehicle in part exchange. Financing/leasing possible with no down payment! Still have questions? We are happy to advise you! Because, despite ongoing checks, deviations of the vehicle from the above description cannot be ruled out, we w

Condition: used, mileage: 58,171 km, power: 106 kW (144.12 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,810 kg, first registration: 05/2022, emission class: euro6, color: white, number of seats: 9, total width: 1,920 mm, total height: 1,881 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1047. TA Z1021 ---LOCATION: 04425 Taucha, Gerichtsweg 4 Contact phone number: Mr. Ralph Bergel: By email: ---EQUIPMENT * Park Pilot, rear parking aid with acoustic warning signal when reversing * Doors: Glazed rear wing doors with 180° opening angle, rear window wipers, and heated * Anti-lock braking system (ABS) with cornering brake control and brake assist * ABS including brake assist and adaptive brake light * Storage compartments – Center console compartment, front – Overhead storage shelf above windscreen, open – Door pockets in front doors (fit 1.5-liter bottles) – Open glove compartment – Closed storage compartment on passenger side dashboard * Driver and front passenger airbags * Side airbags, 1st row * Exterior mirrors, electrically adjustable, heated, and manually foldable * Exterior mirror housings in black * Hill Start Assist * On-board computer * Third brake light * Maintenance-free diesel particulate filter including SCR catalytic converter with AdBlue * Radio accessories: Digital radio reception DAB+ (Digital Audio Broadcasting) – Provides more radio program options. Receives digitally broadcast radio stations and traffic info. * Tachometer * Three-point seatbelts at all seats – Seatbelt force limiters, front – Double seatbelt tensioners, front – Warning tone and light for unfastened belts, front * Electronic Stability Program (ESP Plus) * Windows: Fixed side windows, 2nd row * Electric front windows with one-touch function * Cruise control and speed limiter * Transmission: 6-speed manual * Interior mirror, manually dimmable * Child safety locks, mechanical, 2nd row * Air conditioning, front with particle and odor filter – Manual recirculation mode * Steering wheel: Comfort steering wheel (PU), flat-bottomed * Paint: Solid color * Steering column adjustable for reach and height * Rear fog lights with integrated reversing lights * Radio BT with Graphic Info Display – Audio: Bluetooth audio streaming – Telephone: hands-free via Bluetooth interface – Display of phone book and call lists – Up to 5 mobile phones can be paired – General: Voice control of connected smartphone possible (e.g. Siri, Google voice control) – USB port – 4 speakers * Tire pressure monitoring system * Side impact protection * Side protection strips – black * Speed-sensitive power steering * Seats: Fabric seats 'Meltem' (9-seater) – Comfort driver's seat: 4-way adjustable with folding function for single sliding door – Fixed passenger double seat bench – 2nd row: bench with ISOFIX mounting, removable without tools – 3rd row: monoblock bench, removable without tools – Height-adjustable headrests * Sun visors for driver and front passenger * Start/Stop system * 12-volt socket in the center console * Daytime running lights * Traction control with engine and brake intervention (TC Plus) * Door: Sliding door, passenger side * Full glazing * Electronic immobiliser Nodoud Eyajpfx Ag Iswc * Tinted thermal insulation glazing * Central locking with remote control …and much more. ---Vehicle is in unprepared condition! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to take your vehicle in trade. Financing/Leasing also possible without down payment! Do you have further questions? We are happy to advise you!

Condition: good (used), Year of construction: 1990, CNC Machining Center Manufacturer: MORI SEIKI Model: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel distances X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse speed: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw diameter: 36 mm Feed drives: FANUC AC, X/Y-axis Model 5, Z-axis Model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Spindle taper: BT 40 Njdpfjt Rg E Ssx Ag Iswc Pallet: Pallet size: 315 x 315 mm Pallet indexing increment: 7.5 degrees Indexing accuracy: + / - 2 seconds Repeatability: + / - 1 second Pallet clamping force: 3,400 kg Max. workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec Collet clamping time: 7 sec Max. tool diameter: 110 mm Max. tool length: 250 mm Max. tool weight: 8 kg Special accessories: Workcompletion indicator with warning light Magazine for 30 tools Operating hours display Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Footprint: 1,900 x 2,300 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. Nwjdow Tt R Ispfx Ag Iec - All machines offered are available for viewing at our warehouse.

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, displacement volume: 392 cm³, injection pressure: 1,670 bar, injection weight: 359 g, mold height (min.): 250 mm, overall weight: 4,900 kg, Equipment: documentation/manual, Here we, as a specialist dealer in injection moulding machines, offer the following well-maintained, used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery From July 1, 2025, used machines can benefit from a special depreciation allowance of 30% per year. In addition to the lower purchase price compared to new machines, you can also apply the same tax depreciations as for new equipment (Key term: Growth Booster, (§ 7 Section 2 EStG-E)). The machine is immediately available in our warehouse in Hannover, Germany and has been tested. Manufacturer: Arburg Type: 470C 1500-350 Serial No.: 196184 Year of Manufacture: 2004 Operating Hours: 30,665 h Dimensions (L/W/H): 4.50 x 1.60 x 2.10 m Weight: 4,900 kg Functionality: Fully operational Condition: Very well maintained Special Features Control: Selogica Screw diameter: 50 mm, highly wear-resistant Shot weight: 359 g Injection pressure: 1,670 bar Shot volume: 392 cc Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Mold height: 250 mm Max. platen distance: 750 mm Ejector stroke/force: 175 mm Nwjdjxn Aygjpfx Ag Ijc Clamping unit: Hydraulic Motor power: 18.5 kW Heating power: 9.4 kW Total power: 30.0 kW Extras - 2 additional injection units: 25 mm and 30 mm - 1x core pull - Conveyor belt integrated into the machine bed - Handling interface - Geiger removal device - Selector unit - 2x air blowers - Accumulator for fast injection - Electrical connection for pneumatic shut-off nozzle - Technology level 2, servo-driven control pumps - 9 electrical heating control zones - Interface for temperature control unit (mold) - Interface for color dosing system - Equipment package - Advanced monitoring and motion controls, production management, optimization, operator assistance, quality assurance, and documentation Warranty up to initial commissioning Loading/Shipping Free loading onto buyer’s truck or delivery to site for reimbursement of freight cost from our warehouse in Hannover, Germany Financing On request – hire purchase option Available immediately from our warehouse in Hannover, Germany or delivered to your premises against freight cost reimbursement. The machine is offered fully functional, ownership is solely ours, and it can be viewed under power. About our company and machines: - We only sell machines we own, sourced from running production, available from our Hannover warehouse - All machines are inspected and tested before dismantling - We do NOT sell insolvency goods, nor do we act as brokers trading third-party equipment - All offered machines come from successful companies where maintenance and care are standard - All machines are available for inspection in our warehouse

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, machine/vehicle number: 196184, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, Equipment: documentation/manual, Here we, as a trading company for injection moulding machines, are offering the following well-maintained used injection moulding machine. Of course, we also purchase well-maintained injection moulding machines from the year of manufacture 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current notice – Tax information and advantage for used machinery: Njdew Rm Hdepfx Ag Iswc From 01.07.2025, used machines will also be eligible for a special depreciation allowance of 30% per year for tax purposes. In addition to the more attractive price compared to a new machine, you may claim the same depreciation amounts as with new equipment (ref: Growth Booster, § 7 Abs. 2 EStG-E). Used Injection Moulding Machine with 2 additional available injection units (25 mm and 35 mm) Machine is currently fitted with a 50 mm injection unit. See document for download. Manufacturer: Arburg Type: 470C 1500-350 Year of manufacture: 11/2004 Machine No.: 196184 Control system: Selogica Operating hours: 30,665 h Regularly serviced by manufacturer Clamping Unit Clamping force: 1500 kN / 150 tons Tie bar spacing: 470 x 470 mm Mould mounting plates: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mould installation height: 250 mm Maximum daylight between platens: 750 mm Injection Unit 50 mm (high wear-resistant) Shot volume: 392 ccm Shot weight: 359 g Screw diameter: 50 mm Injection pressure: 1670 bar Extras - 2 additional injection units: 25 mm and 30 mm - 1 x core pull - Conveyor belt installed in machine bed - Handling interface - Geiger part removal device - Selection unit - 2 x air blowing ports - Accumulator for fast injection - Electrical connection for pneumatic shut-off nozzle - Technology level 2: servo-driven proportional pumps - 9 electrical heating circuits - Interface for mould temperature control unit - Interface for dosing unit - Equipment package - Extended monitoring, extended movement controls, production control, optimisation/operator guidance, quality assurance, documentation Visible peripheral devices not explicitly named are not included in the scope of delivery. - Immediately available from our warehouse in Hanover. Free loading or free delivered, subject to shipping costs - Function tested (guaranteed functionality up to initial commissioning)

Condition: like new (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, machine/vehicle number: 196184, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, Equipment: documentation/manual, Used injection moulding machine – with 3 interchangeable injection units (25, 35, and 50 mm) Currently fitted with 50 mm unit Includes Geiger picker, integrated conveyor belt From ongoing German production, fully functional See document for download Manufacturer: Arburg Model: 470C 1500-350 Year of manufacture: 11/2004 Machine No.: 196184 Nedpfevhb Iysx Ag Iewc Control system: Selogica Operating hours: 30,665 h Regularly serviced by manufacturer Clamping unit: - Clamping force: 1,500 kN / 150 tons - Tie bar distance: 470 x 470 mm - Platen size: 650 x 650 mm - Ejector stroke: 175 mm - Opening stroke: 500 mm - Min. mould height: 250 mm - Max. daylight between platens: 750 mm Injection unit (50 mm): - Shot volume: 392 cm³ - Shot weight: 350 g - Screw diameter: 50 mm - Injection pressure: 1,670 bar Alternatively, 25 mm and 35 mm injection units included Extras: - Geiger picker - Handling interface - 2x air blow-offs - Accumulator for fast injection - 9 electric heating zones - 4 free cooling circuits - Optional equipment packages: Extended monitoring, enhanced motion controls, production management, process optimisation / operator aids, quality assurance, documentation - Electric conveyor belt - Sorting unit Documentation and software available in German (fully comprehensive) - Immediately available from our Hannover warehouse, loaded ex works or delivered (shipping at cost) - Function tested (guaranteed function up to first commissioning)