Used Telescopic Conveyor for sale (12,714)

Condition: new, axle configuration: 2 axles, Equipment: ABS, Technical data for EBERT TLS 43 ATV special low loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Tare weight according to DIN: approx. 12,500 kg, Low bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 2,700 mm, Outer width: 2,550 mm, Loading edge/low bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low bed to: 3,050 mm, Low bed/telescoping by: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2K paint, Overwidth signage front and rear with red/white signs Fjdjyfvwbspfx Am Ejpp Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from outside in the corners on the left and right, Storage box with cover behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, Spare wheel on the upper deck, behind the partition on the right, Steps on the right side to get from the low bed to the front upper deck, Hydraulic coupling for decoupling on the left side, 6-fold Multi-Faster coupling, 6 lashing points, 3,000 kg capacity, externally on the upper deck / recessed lashing eyes, 2 lashing points, 5,000 kg capacity, on top of the longitudinal girders (towards the rear) Low bed: Climbing aids on the boom – extension, Low bed telescoping by 4,000 mm and lockable every 500 mm, With sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg capacity, externally in the outer frame, 24 attachment tubes 90x90, evenly distributed for low bed widening to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck sloping and perforated for retrofitting ramps, galvanized with adapters. Ramp retaining profiles (Altec) – C-rails at the rear, 6 lashing points, 10,000 kg capacity, externally on the upper deck, 6 lashing points, 5,000 kg capacity, in the excavator well, 8 lashing points, 5,000 kg capacity, for overwidth in the outer frame, Closing of the excavator well at the front and rear with a wooden floor panel (insertable) Electrical system: Use NATO connector, Power comes from the towing vehicle, Rotating beacon at the rear center, Side lights in LED design, Standard rear light for upright mounting (LC5), Work spotlights on the upper deck, to illuminate the low bed, Decoupling: Sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60 l (2x 10 l, 2x 20 l), TEBS modulator, Locking of the extension to the left and right (valve on the side in the rear upper deck), Double shut-off valve Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck Accessories: 2x 4 pieces of wooden plank as support for widening the low bed and intermediate table, 2 pieces of securing wedges for decoupling, 4 pieces of support wedges Upon request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. You can find more information on our homepage. Errors and prior sale are subject to change! Rental possible = Further information = Year of construction: 2021 Tare weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Please contact Tobias Ebert for more information.

Condition: used, functionality: fully functional, Equipment: type plate available, Loading and Unloading Conveyor/Trailer Loader Manufacturer: Pewisys Type: pewiVehicle VEH3-600 Serial No.: I19603/Al Condition: used Adjustable loading and unloading height (hydraulically) Mobile unit with scissor-lift roller conveyor with drive The trailer loader consists of: Infeed conveyor: approx. 1100 mm long Inclined conveyor: approx. 3000 mm long Scissor-lift roller conveyor up to approx. 8000 mm long with 6 motors Belt type: Super Grip PVC Including frequency inverter Including Bauer motor for the conveyor belt Including 6 motors for the scissor-lift roller conveyor Internal article number: 2026110904 Offers will only be provided upon presentation of a valid legal notice; sales are only made to commercial customers! Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until it was dismantled. Thanks to the excellent workmanship of the conveyor system, your material will glide smoothly to its destination, even under high load. Fpedpfs Aiin Uex Am Esp Tailored solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic systems for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, crafts, or the electronics industry.

Condition: used, Year of construction: 2018, operating hours: 640 h, load capacity: 200 kg, empty load weight: 2,980 kg, fuel type: electric, ATN Piaf 1000R. Year of manufacture: 2018. Working height: 10 meters. Lateral reach: 3.40 meters. Working weight: 2980 kg. 24-volt battery. Integrated charger: 230 volts. Video available via WhatsApp. Fpedsz Dbwtepfx Am Eep Price net + 21% VAT or net export with VAT number. We speak Dutch. We speak German. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 66 h, load capacity: 227 kg, lifting height: 13,940 mm, platform length: 760 mm, platform width: 1,830 mm, empty load weight: 7,400 kg, transport length: 6,830 mm, transport width: 1,790 mm, transport height: 2,000 mm, construction height: 2,000 mm, fuel type: electric, tire size: 230 × 370 mm, wheelbase: 2,030 mm, ground clearance: 240 mm, color: blue, Whether it's maintaining lines above a production facility or reaching a light fixture behind a row of machines, the articulating boom of the Genie Z-45/25J DC allows the work platform to be positioned even when the lift cannot be positioned directly under the work area. This electric articulating telescopic boom lift reaches a working height of up to 15.94 m and a lateral reach of 7.65 m. Inside buildings, the lift operates quietly and without local emissions. The upper structure pivots without a rear overhang, which is an advantage when there is limited space next to the chassis. With the 1.52 m long boom arm and the platform that can be rotated by 160°, the work platform can be aligned along a facade or parallel to a machine. Technical data: - Year of manufacture: 2025 - Condition: Used equipment - Operating hours: 66 h - Maximum working height: 15.94 m - Maximum platform height: 13.94 m - Maximum lateral reach: 7.65 m - Maximum overall height: 7.24 m - Platform load capacity: 227 kg Fjdpfxe Ai Ngxj Am Ejpp - Work platform: 1.83 m wide and 0.76 m deep - Drive: battery-electric, 48 V, two-wheel drive - Transport dimensions (L × W × H): 6.83 × 1.79 × 2.00 m - Weight according to data sheet: approx. 7,400 kg - Internal equipment number: 2897 Price: €47,990.00 net, plus 20% VAT. At HDM in Wolfsbach, you will receive rental, sales, service, and repair from a single source. Lease purchase, financing, and the purchase of used machines are also possible. Would you like to inspect the lift or receive a quote? Contact us via Maschinensucher, by phone, or via WhatsApp and mention the equipment number 2897. HDM GmbH – Wolfsbach Safe working at any height.

Condition: new, functionality: fully functional, Year of construction: 2026, power: 36 kW (48.95 HP), load capacity: 227 kg, lifting height: 15,590 mm, platform length: 760 mm, platform width: 1,830 mm, empty load weight: 7,394 kg, transport length: 7,580 mm, transport width: 2,290 mm, transport height: 2,130 mm, construction height: 2,130 mm, fuel type: diesel, fuel tank capacity: 64 l, tire size: 315/55 D20, schaumgefüllte Geländereifen, wheelbase: 2,030 mm, ground clearance: 370 mm, color: blue, Equipment: all wheel drive, For assembly work on facades and steel structures, the work platform of the Genie Z-51/30J RT can be positioned even if the space directly below the work area is obstructed. This diesel-powered articulated telescopic boom lift reaches a working height of up to 17.59 m. The maximum lateral reach is 9.37 m, and the maximum outreach height is 7.39 m. The 1.52 m long platform arm and the platform that can be rotated by 160° make it easier to align at the assembly point. When rotating, the rear does not protrude laterally beyond the chassis – an advantage when working near facades or between steel supports. For driving on uneven construction site terrain, the boom lift is equipped with all-wheel drive, an active oscillating axle, and foam-filled off-road tires. Technical data: - Year of manufacture: 2026 - Condition: New - Operating hours: 0 h - Maximum working height: 17.59 m - Maximum platform height: 15.59 m - Maximum lateral reach: 9.37 m - Maximum outreach height: 7.39 m - Platform load capacity: 227 kg - Work platform: 1.83 m wide and 0.76 m deep - Engine: Deutz TD2.2L turbocharged diesel, emission stage V - Engine power: 36 kW / 49 hp - Drive: All-wheel drive - Transport dimensions (L × W × H): 7.58 × 2.29 × 2.13 m - Standard weight: approx. 7,394 kg Price: 57,500.00 € net, plus 20% VAT. Fsdpj Ai Nfhjfx Am Ejpp At HDM in Wolfsbach, you can get rental, sales, service, and repair all from one source. Lease-purchase agreements, financing, and the purchase of used machines are also possible. Would you like a quote or want to know if the boom lift can reach your assembly point? Write to us directly via Maschinensucher or contact us by phone or WhatsApp. HDM GmbH – Wolfsbach Safe working at any height.

Condition: new, Year of construction: 2026, Troughed belt conveyor | Trough belt conveyor | Belt conveyor Demonstration machine Make: S&F GmbH Type: MFB-500/3 Belt width: 500 mm Centre distance (A-A): 3,000 mm Conveying capacity: approx. 20 m³/h (at 0 ° incline) Drive: Gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Fode Ai Rfyjpfx Am Espp Machine weight: approx. 300 kg Machine colour: RAL 5012 Light blue Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 2 h, power: 36 kW (48.95 HP), load capacity: 454 kg, lifting height: 13,860 mm, platform length: 760 mm, platform width: 1,830 mm, empty load weight: 7,421 kg, transport length: 6,650 mm, transport width: 2,290 mm, transport height: 2,250 mm, construction height: 2,250 mm, fuel type: diesel, fuel tank capacity: 64 l, tire size: 315/55 D20, wheelbase: 2,030 mm, ground clearance: 370 mm, color: blue, Equipment: all wheel drive, The Genie Z-45 XC is suitable for assembly work on facades and steel structures, where tools and materials need to be transported into the platform along with the personnel. In the unrestricted working area, the platform can support 300 kg. For heavier loads, up to 454 kg is available in the restricted working area. The articulated boom allows you to reach assembly points behind an awning or steel strut. The maximum working height is 15.86 m, and the lateral reach is up to 7.55 m. The work platform can be rotated 160° and aligned parallel to the facade. When swiveling, the rear remains within the machine width. The diesel platform is equipped with all-wheel drive and an active oscillating axle for access on the construction site. Technical data: - Year of manufacture: 2025 - Condition: Used equipment - Operating hours: 2 h - Maximum working height: 15.86 m - Maximum platform height: 13.86 m - Maximum lateral reach: 7.55 m - Maximum overall height: 7.44 m - Platform capacity: 300 kg (unrestricted) / 454 kg (restricted working area) - Work platform in standard version: 1.83 m wide and 0.76 m deep - Drive: Diesel, all-wheel drive - Transport dimensions with retracted boom (L × W × H): 6.65 × 2.29 × 2.25 m - Standard version weight: approx. 7,421 kg - Internal equipment number: 2915 Price: €52,000.00 net, plus 20% VAT. At HDM in Wolfsbach, you can get rental, sales, service, and repair all from one source. Lease-to-own, financing, and the purchase of used machines are also possible. Would you like to inspect the platform or receive a quote? Contact us via Maschinensucher, by phone, or via WhatsApp. Please state the equipment number 2915. Fjdpfx As Ai Sk Ijm Espp HDM GmbH – Wolfsbach Safe working at any height.

Condition: new, functionality: fully functional, power: 45 kW (61.18 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,000 kg, lifting height: 4,095 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telescopic Loader 3518T – the versatile farm loader with a telescopic arm for demanding tasks. Advantages of the H&R 3518T Wheel Loader with Telescopic Arm Powerful engine: Yunnei common-rail diesel engine with Bosch injectors and Bosch control system, 45 kW / 61 hp. Exhaust turbocharger with intercooling for improved responsiveness in the lower speed range. Euro-5 emission standard with particulate filter, without AdBlue. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic circuit to operate additional attachments such as mowers, bale grabbers, snowplows, etc. Comfortable cabin for all-day use: The H&R wheel loader offers a spacious cabin with an adjustable seat, diesel preheater, and rear-view camera, as well as heating and ventilation. This allows you to carry out even longer tasks comfortably and safely. H&R loaders are technically and visually optimized and thoroughly tested in our facility. In addition, each machine receives extensive rust protection. Our wheel loaders comply with CE standards according to the EU Machinery Directive. For our machine, there is a TÜV Süd expert report for obtaining an individual operating permit in accordance with §21 StVZO (road approval / operating permit as a self-propelled working machine). Important features of the H&R 3518T telescopic loader: • Full equipment • Extendable telescopic arm for greater reach • Includes standard bucket (190 cm) and pallet fork • Powerful and robust - versatile • Compact design ensures high maneuverability despite the size • Comfortable cabin with heating and ventilation • Joystick with electronic gear selection for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rear-view camera with display • MP3 radio and USB port for entertainment during work • Ball-head trailer hitch with socket for additional use of trailers • Coolant preheating 220V for reliable cold-start capability and increased engine life. • Hour meter to monitor operating times and maintenance intervals • CE compliant according to EU Machinery Directive • Extensively optimized in Germany • 1 year spare parts guarantee Fpsdpfjulac Tex Am Esp Price Net: €28,660.00 VAT: €5,445.40 Gross: €34,105.40 Financing possible! Optional Road approval / operating permit: €480 Extended warranty (2 years): €590 Transport Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 45 kW / 61 hp Emission class: Euro 5 Lifting capacity 1800 kg Lifting height: 4095 mm (underside of standard pallet fork) Discharge height: 3451 mm (standard bucket tilted) Wheelbase: 2272 mm Tires: 20.5-70 R16 Dimensions: 4890 x 1870 x 2570 mm Weight: 4220 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, Year of construction: 2026, load capacity: 4,000 kg, lifting height: 20,000 mm, total length: 7,900 mm, Telescopic forklift JCB 540-200 Drive Diesel Year built 2026 Lifting height (mm) 20,000 Fpjde Afz Dpjpfx Am Eep Lifting weight (kg) 4,000

Condition: used, Year of construction: 2013, Technical details: band width: 600 mm voltage: 460 / 60 V / Hz total power requirement: 3,5 kW weight of the machine approx.: 2300 kg dimension machine xH: ca. 9,0 x 1,4 x 3,0 m hinged type chip conveyor, as good as new With coolant tank incl. pump (submersible centrifugal pump) Delivery rate 250 l/min. = sufficient for a conveying height of 25m Chip insertion length (A) 3000mm (attachment with sheet metal tray with rubber coating 3000 x 1100mm) Total insertion length 5000mm Belt width (H) 600mm Discharge height (C) above floor 1800mm Fpjdpju Nupdofx Am Esp The chip conveyor has 4x swivel wheels underneath and can be fixed to the floor with bolts. *

Condition: good (used), Year of construction: 2001, operating hours: 20,900 h, functionality: fully functional, Channel baling press Paal Konti 275 D, year of manufacture 2001, with shredder and chain belt conveyor Paal KEM-1500, year of manufacture 2005 Technical data: Manufacturer Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20,900 as of 10/2026 Pressing force 75 t Total connected load 106 kW Fjde Afwy Hspfx Am Ejpp Feed opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable Tying 4-way automatic Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveyor speed: 0.29 m/s Nominal width 1500 mm Axle distance 17500 mm Length of feed belt: approx. 10000 mm Length of rising section: approx. 9000 mm Gooseneck: approx. 1000 mm Inclination angle: 28° Materials: Paper, cardboard, light waste, plastic waste Note: The press is currently still in operation. Dismantling is planned for December 2026. An inspection under operating conditions is possible. The complete documentation including the CE declaration is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale is reserved and the offer can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without any guarantee or warranty.

Year of construction: 2002, condition: excellent (used), Hinge width 300 mm Fsdpfx Amsmdqx Ho Eopp Slide-in width - / height 390 x 100 mm Insertion length 4615 mm Height from floor to lower edge of chip ejector 700 mm Hinge drive 0.37 kW Transport dimensions L x W x H approx. 5965 x 750 x 1010 mm (height without feet!) Weight approx. 500 kg Foot height adjustable yes This hinged chip conveyor manufacturer TEKNICALDE model TC 1 ½ 300 was used on a CNC bed milling machine MTE Kompakt. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Harbs TB150/3500 heavy-duty conveyor belt with pneumatic stopper. Technical data: - Width: 150 mm - Length: 3,500 mm Fpjdpfx Aszrx Nfjm Ejp

Condition: used, Heavy-duty roller conveyor with length stop and ruler. Fsdpfxezrx N Ss Am Espp Technical data: - Length: 3,100 mm - Width: 650 mm - Height: 1,050 mm - Roller height: ~ 920 mm - Roller width: 440 mm

Condition: used, Sicko return conveyor for returning workpieces to the operator after processing on (for example) multi-blade saws or planers. Compatible with the multi-blade saw (1328-400217). Technical data: - Length: approx. 6,000 mm Fjdpoztvu Uefx Am Eepp - Width: approx. 2,900 mm - Height: approx. 780 mm - Workpiece length: max. approx. 4,000 mm - Workpiece width: max. approx. 900 mm

Condition: like new (used), Year of construction: 2019, Manufacturer Niverplast, available for sale: Item 01) 3.0 pcs flat belts, width x length, 2,400 mm x 600 mm Item 02) 1.0 pc flat belt, width x length, 2,600 mm x 500 mm Fjdpfx Aoyifraem Ejpp Item 03) 1.0 pc flat belt, width x length, 3,000 mm x 600 mm Item 04) 5.0 pcs flat belts, width x length, 1,600 mm x 600 mm Item 05) 1.0 pc flat belt, width x length, 2,400 mm x 450 mm Item 06) 2.0 pcs flat belts, width x length, 900 mm x 600 mm Item 07) 3.0 pcs roller conveyors, width x length, 665 mm x 665 mm

Condition: used, Conveyor belt for collecting finished parts – a transporter with a storage bin For sale: an industrial conveyor belt designed for the automatic collection of finished parts from production machines. The device collects parts directly from the machine and stores them in a bin. Once the bin is full, the operator uses a foot pedal to start the conveyor belt, which empties the accumulated material into a box or container. Features: * Conveyor belt for collecting finished parts * Large bin for storing finished parts * Foot pedal-controlled emptying * Electric drive with a gearmotor * Robust steel construction * Compatible with various production machines * Facilitates the collection, buffer storage, and packaging of finished parts Applications: wood industry, furniture industry, and other production lines requiring the collection and periodic emptying of finished parts. Fsdpfj Agu E Hsx Am Eepp Condition: used. Dimensions: Height from the ground: approximately 120 cm Belt width: 39 cm Width at the loading side: 80 cm Height at the loading side: 100 cm.

Condition: new, Year of construction: 2026, operating hours: 2 h, load capacity: 1,800 kg, lifting height: 4,537 mm, fuel type: diesel, motor manufacturer: Yanmar, gearing type: hydrostat, empty load weight: 3,200 kg, total height: 1,995 mm, total width: 1,725 mm, H&R 4518 ST Side Telescopic Handler with Cab Low overhead clearances and high loading points: a compact telescopic handler for agriculture, equestrian facilities, warehouses, commercial operations, and horticulture. TECHNICAL DATA Rated load: 1,800 kg Lifting height (bottom edge of pallet forks): 4.537 m Yanmar diesel engine: 33 kW / approx. 45 hp, Euro 5 Hydrostatic drive and all-wheel drive, up to 20 km/h Length without bucket: 3.10 m; Width: 1.725 m; Overall height: 1.995 m Unladen weight: 3,200 kg EQUIPMENT Euro quick coupler with hydraulic quick-change system and electric unlocking lock; additional front hydraulics with continuous operation; differential lock; selectable front steering, all-wheel steering, and crab steering; joystick with electronic gear selection; ROPS/FOPS cab with heating, ventilation, and radio; reversing camera; LED work lights; overload indicator with visual and audible warning; German operating manual. PRICE AND SCOPE OF DELIVERY Base machine with Euro quick coupler: €39,970.00 net + €7,594.30 VAT (19%) = €47,564.30 gross. Bucket, pallet forks, air conditioning, and other attachments available as optional extras at an additional cost. Shipping costs upon request. Attachments shown in the images are only included if explicitly agreed upon. The usable lifting capacity depends on the load and lifting height; the load chart is the determining factor. Fsdpfx As Agrm Uem Ejpp Optimized and tested by H&R in Germany. Personal German-speaking advice, technical support, a digital maintenance database, and an online shop for service and spare parts. Viewing and test drives are available in Falkenberg by appointment. Tell us about your application – we will advise you on the right equipment!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 500 mm, 2000 x 500 mm Fpodpfxey N A Rds Am Eep

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 1,948 h, load capacity: 227 kg, lifting height: 11,140 mm, empty load weight: 6,615 kg, construction height: 2,080 mm, fuel type: electric, Telescopic articulated boom lift GENIE Z30/20N Year of manufacture: 2006 According to the hour meter: 1,948 operating hours Fsdpfx Asz Du Ilem Eopp 11.14 meters working height 9.14 meters platform height 6.53 meters lateral reach 227 kg payload 6,615 kg total weight - Telescopic boom - Articulated boom - White tires - Integrated charger - 48V - Ready for immediate use - Well-maintained machine - Upon request: new Austrian inspection certificate provided before delivery! Selling price: €6,600 net Affordable delivery also possible!

Condition: new, functionality: fully functional, Work platform / lift / trailer-mounted platform Matilsa Parma 12t Max. working height: 12m Max. lateral reach: 6m Drive: 230 V Hydraulic outriggers Fedpfx Amj Afbzze Eepp Telescopic includes: Roller drive, Rotating basket, Light bar DELIVERY TIME UPON REQUEST We have work platforms ranging from 7 to 17m.

Year of construction: 2023, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Magni hydraulic telescopic boom JT 2500 I / 2.5 tons / suitable for RTH & TH series / year of manufacture: 2023 / NEW unit / in stock & immediately available Price: €7,890.00 net / €9,389.10 gross - Max. lifting capacity, retracted: 2,500 kg - Max. lifting capacity, extended: 1,500 kg - Length, extended: 2,690 mm - Length, retracted: 1,790 mm - Automatic attachment recognition: yes This attachment is suitable for the RTH and TH series. Product code: ATT-04-021 We have many other attachments for Magni in our warehouse that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will gladly provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Magni range! Errors and prior sale excepted! Internal ID: 022235 = More information = Fpodpfx Aezr Tw Djm Eop Year of manufacture: 2023 New: Yes Please contact Marius Herden for further information.

Condition: excellent (used), functionality: fully functional, total length: 1,600 mm, total width: 200 mm, overall weight: 50 kg, power: 0.18 kW (0.24 HP), type of input current: three-phase, input voltage: 220 V, input frequency: 50 Hz, input current: 1 A, Length: 160 cm Width: 20 cm Fpsdpfxs Aibc Rj Am Ejp Height of the cleats: 2 cm Adjustable conveyor belt height Two units available Net price: 550 EUR / unit

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: ZCFCE35A505716230, lifting height: 17,700 mm, platform length: 1,400 mm, platform width: 700 mm, overall weight: 3,500 kg, transport length: 7,160 mm, transport height: 2,950 mm, construction height: 2,950 mm, fuel type: diesel, color: white, Equipment: ABS, Android Auto, IVECO 35S14 p3750-EuroVI-E MY24 2P, no export model + comfort package Fpodpfx Ams Ah Ezgo Eop Socage Connect Recovery system, remotely controlled emergency lowering SocageSafe Workplace safety lights Position lights on the rear bumper

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 400 h, load capacity: 4,500 kg, lifting height: 10,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 10,300 kg, total length: 5,040 mm, drive type: Diesel, construction width: 2,350 mm, Rigid telescopic forklift Fodpfx Amexfm Nye Espp Mast type: Telescopic Technical condition: New Front tires size: 500/70 r 24 michelin xcml Rear tires size: 500/70 r 24 michelin xcml