Used Tilting Device for sale (14,133)

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Csdpfx Asziww Aekteri Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Year of construction: 2015, condition: ready for operation (used), NanoString nCounter Sprint Profiler Analysis System Technical Specifications * Multiplex analysis: up to 800 targets simultaneously * Sample throughput: up to 24 samples per day * Sample capacity: 1–12 samples per run * Hands-on time: approx. 10 minutes Cjdpj Afcqqofx Akteri * Analytical method: digital molecular counting using fluorescence-labeled reporter probes * Sample preparation and analysis: integrated into a single device * Sample material: total RNA, FFPE-derived RNA, cell lysates, and suitable lysed whole blood samples * SPRINT cartridge reaction volume: 25–35 µl * Dynamic measurement range: up to 6 × 10⁵ total counts * Data export: digital count values, including as a CSV file * Software: nSolver Analysis Software (check availability and license scope) Device dimensions and weight * Width: 107 cm * Depth: 72 cm * Height: 82 cm * Weight: approx. 95.25 kg Technical description has been adopted. You are welcome to visit us for a demonstration. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are subject to change.

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Codpfx Akjziwwijtjri Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: good (used), functionality: fully functional, Year of construction: 2016, This is a professional, mobile cleaning device for injection molding machines and temperature control units. It can effectively flush out contaminated and scaled channels. Upon request, an operating manual for the system can be sent by email. Features of the system: Two-container system made of stainless steel, 1 container for descaling and container 2 for neutralizing agent. Pulsating cleaning through air impulses. Process monitoring. Cjdpfx Ajz Szn Njktjri Reduces cooling times in injection molding by up to 40%.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, overall weight: 579 kg, year of last overhaul: 2024, Equipment: documentation/manual, lighting, type plate available, Mitutoyo QVT1-X404P1L-D 3D CNC Multisensor Measuring Machine Enhanced application possibilities through the combination of tactile and non-contact measurement. Powerful CNC-controlled system for intelligent, simple, and fully automatic measurements. Multiple image processing filter functions ensure reliable results. Flexible switching of probe tip configurations with the MCR20 probe head changer. White LED transmitted light. White LED coaxial light. Programmable 4-quadrant LED ring light. Triangular pattern focusing for low-contrast surfaces. Cedpfx Ake Afdr Astjri Programmable magnification changer with 1x, 2x, and 6x magnification. High-resolution CCD black and white camera. Resolution: 0.0001 mm "One-Click Tool" technology for optimal edge detection.

Condition: good (used), The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Crsdpfx Aksz N Smdetsi

Condition: good (used), Year of construction: 2019, heating cooling device GWK teco tt 50.08 WT2 300°C oil 8 kW Crjdpfxo Aba Eqj Aktoi year: 2019 price: 4.200 € contact: Mr. Rainer Eckerle

Condition: ready for operation (used), Year of construction: 2007, Stiefelmayer Brivisor KL-4 Hardness Testing Machine Testing height: 150 mm (with testing table) Outreach: 200 mm Device footprint: 560 mm x 250 mm x 770 mm (W x D x H) Load range: 0.05 - 10 kgf Weight: approx. 45 kg Year of manufacture: 2007 Vickers: HV 0.1 | 0.3 | 0.5 | 1 | 2 | 3 | 5 | 10 Brinell: HBW 1/5 and HBW 1/10 Crjdpfszzynhsx Aktsi You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Year of construction: 2017, condition: used, Laser cleaning device Manufacturer: Clean Laser Type: intelliScan30 Year of manufacture: 2017 Crsdpfx Ake Aa Nnrjtoi Includes TEKA extraction system 41126ä

Condition: excellent (used), functionality: fully functional, Equipment: foot remote control, Excellent condition Rotating device with adjustable height, featuring joints on both sides (the component does not need to be aligned due to the joints) Motor-driven, with foot pedal, adjustable clamping range for your component Dimensions: Minimum height 550mm, maximum height 1300mm Crsdoz Hvurepfx Aktsi Mounting plate 440 x 300mm Base dimensions per side approximately 1600mm x 1200mm Optionally, a perforated table or a component of any size can be clamped 3000 kg load capacity, motor-braked One side driven, the other side rotates passively.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Canon High Capacity Stacker H1/J1” finishing machine Item for sale: 1 x Canon High Capacity Stacker H1/J1 Condition: This offer is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Compatible with various Canon imagePRESS models, including the C650/C750/C850, C710/C810/C910 and C8000VP/C10000VP. The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Cedez Ixzqepfx Aktsri Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 2000, Robust swiveling milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which is then set on the stop, allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed fence individually, as well as input of the cutter diameter; the cutting depth is automatically calculated. Stop with lifting device can be swiveled away (for arc milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Fold-down stop for plunge milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron fence, left 500mm, right 500mm with two insert guide rails. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed connection, switchable from the control panel. Comfort stand with electrically height-adjustable feed support; this can be swiveled away for machine setup and then easily locked back into place. Dust extraction connection 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belt renewed. Operating manual. Cjdpjzbm Tfsfx Aktori CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse. See "other offers from this supplier."

Condition: ready for operation (used), Year of construction: 2009, Mahr MarSurf CD 120 Contour and Roughness Measuring Instrument, Surface Measuring Instrument Measuring range: 120mm Measuring force adjustable from 2 mN to 120 mN Mahr ST 500 measuring stand Cedpezmtlqsfx Akteri Year of manufacture: 2009 Accessories: Contour measuring probe: Mahr PCV probe arm 350 Roughness measuring probe (software license for roughness measurement has expired) Mahr calibration standard Mahr cross slide table You are welcome to come and inspect the equipment. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 1988, tilting spindle: Ja -5 bis 45° height adjustment: elektrisch tilting adjustment: elektrisch fence adjustment: manuell height indicator: digital tilting indicator: digital fence indicator: Scala spindle diameter: 30 mm speeds: 3000, 4500, 6000, 8000, 10000 motor power: 6 kW motor brake: Ja, automatisch Credpfozq Dc Ijx Aktoi sustion connection: 2 x 120mm machine length: 1200mm machine wide: 1400mm weight: 1100kg

Condition: used, functionality: unexamined, total width: 120 mm, total length: 120 mm, total height: 120 mm, overall weight: 1 kg, Bender ISOMETER iso685-D-B Insulation Monitoring Device – B91067020 Insulation monitoring device for continuous monitoring of the insulation resistance in unearthed AC, DC, and AC/DC power supply systems. Manufacturer: Bender Product Series: ISOMETER Type: iso685-D-B Article Number: B91067020 Device Type: Insulation Monitoring Device Monitored Network System: IT systems (unearthed networks) Network Rated Voltage AC: 0–690 V Network Rated Voltage DC: 0–1000 V Network Rated Frequency: 1–460 Hz Supply Voltage AC: 24–240 V Supply Frequency: 50–400 Hz Supply Voltage DC: 24–240 V Measured Values: Insulation resistance, network voltage, network leakage capacitance, and frequency Measurement Method: Active AMPPlus measurement method Cedpj Aia Dnsfx Aktsri Measurement Profiles: Predefined measurement profiles for different network conditions Display: Integrated high-resolution graphical LC display Operation: Integrated control elements Communication Interfaces: Ethernet and RS-485 Communication Protocols: Modbus TCP, Modbus RTU, BCOM, Bender Sensor Bus Web Server: Integrated History Memory: Available ISOnet Function: Available, for monitoring coupled IT systems Alarm: When set insulation limit values are undercut Remote Monitoring: Possible via network interface Extension of Voltage Range: Possible via external coupling devices Standard for Insulation Monitoring: IEC 61557-8 Application Areas: Industrial power supplies, converter systems, UPS systems, battery networks, and coupled IT systems.

Year of construction: 2016, condition: used, Turning Device Kolbus DK 670 Year: 2016 Cjdpfxe Ahgfvo Akteri For horizontal turning of single book blocks. Configuration: - tapered roller turning unit - 180° turning (2 x 90° turning) - mobile Max. mechanical speed: up to 60 book blocks/min. Book block format (max): 375 x 305 x 80 mm Book block format (min): 100 x 70 x 2 mm

Condition: excellent (used), Year of construction: 2019, 1.0 unit, two-component dispensing system with material feed and mixer. Manufacturer: KOCH - Technik Type: GK-65 / 612D / GK65 / Year of manufacture: 2019 Cjdpfx Akez Hn Ecsteri

Condition: good (used), Code: 0505 Brand: SCM Model: 150 - CE standard Automatic spindle moulder with tilting spindle, with numerical control programmer (3 controlled axis) for joinery, furniture, bespoke furnishings, wooden joinery, doors, panels, plastics, composite materials and various other applications – CE Standard Technical data: Electronic programmer with 3 controlled axis (spindle lifting – spindle tiltimg – spindle guide) allowing up to 98 programmes to be stored and executed automatically Spindle diameter mm 35 Spindle tilting -10° to +45° Spindle speed rpm 3000/4500/6000/7000/10000 Motor power Hp 7,5 Crjdpj Ad Nz Tefx Aktei Table length mm 2600 Max spindle projection mm 215 Work surface height from ground mm 920 N° 2 dust extraction inlets diameter mm 120 Equipped with Maggi 4-roller automatic feeder Maggi with variable speed control Overall dimensions mm 2600 x 1300 x 1800 h Weight kg 1400

Condition: used, functionality: fully functional, These are two tilting cooking kettles with volumes of 200 and 150 liters, manufactured by Electrolux Thermaline, Swiss made, type BOT150E.MZ35.F981---4 / BOT200E.MZ35.F181--4. The kettles were in operation in a food production facility until its closure. We had the opportunity to connect the kettles shortly before dismantling to check their basic functions. The central cooling system for cooling down was already disconnected but is said to have been functioning until the end of production. Credpfjz Rulfsx Aktji The two tilting cooking kettles are offered for sale as a package. Due to their age, they are sold without warranty, as is. Exploded views / parts lists / wiring diagrams are available. Videos demonstrating the basic operation of the units can be sent upon request. Price on request! You will receive an invoice with VAT shown. Our used equipment service for you: • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional • Flexible shipping or self-collection options • Competent advice – before and after the purchase • Provision of operating manuals, connection diagrams & spare parts • Inspection according to DGUV V3 Technical data: • W x D x H: Dimensions and weight will be provided shortly • Power connection: 400 V / 245 kW / 50-60 Hz • Weight: approx. • Serial number: 32600176 / 21900039 Condition: used, fully functional, without warranty Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like a consultation, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 am to 1:00 pm and from 2:00 pm to 5:00 pm. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2021, condition: used, For inquiries regarding the device, Mr. Herden is at your service (available by phone at [phone number]). Optimas vacuum device SV 200 E incl. suction plate & other accessories / Year of manufacture: 2021 / in stock & immediately available / in excellent condition Price: €2,190.00 net / €2,606.10 gross - Weight: 21 kg - Load capacity: 200 kg - Vacuum pump: 16 m³ Features: - incl. suction plate & other accessories (see photos) In our warehouse, we have a very large selection of various devices that are immediately available! Mr. Herden (Tel. [phone number]) will gladly assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Magni telescopic loader sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Crodez Ht Hlspfx Aktsi Internal No.: 003674 = Further Information = Year of manufacture: 2021 Unladen weight: 21 kg Please contact Marius Herden for further information.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AW028566, The A-Ward Eco Scrappa is a container tilting system (Tilting Container Loader) manufactured by the New Zealand-based company A-Ward Global. The system is specifically designed for the scrap and recycling industry: • Functionality: 20-foot and 40-foot sea containers can be tilted and emptied continuously at angles ranging from -10° to 90°. Container tilter with a universal frame. Autonomous hydraulic system with remote control. Crodpfx Akez Rk Rwetei The system is operated by an operator, and the system includes an integrated weighing system, allowing containers to be precisely balanced during the loading process.

Condition: excellent (used), Locking device Crjdpfx As Ahfilektsi Manufacturer: DALEX, Type: VI 5T Designed to limit network load Suitable for connecting 5 resistance welding machines.

Condition: used, Used SCM T150K model shaper with tilting spindle. 2.2 kW fence recovery unit. Shaper fence can be detached from the worktable. Credpsz Rzu Tjfx Aktoi Fence position adjustment with handwheels and mechanical height indicators. Shaper motor: 7.5 HP. Automatic star/delta starting with rotation reversal. Spindle rotation speeds: 3000/4500/6000/7000/10000 rpm. Removable front fence. Shaper spindle tilt: -10/+45°. Table length: 2550 mm. Max. profiling tool diameter: 250 mm. Fast sector table as a replacement for the rings on the table. Weight: 745 kg. Dimensions: 2550x1200x1300 mm. CE marking.

Condition: used, Year of construction: 2011, Spindle swiveling: Yes, -45 to +45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling vice adjustment: Manual Height indicator: Mechanical counter Swivel angle indicator: Mechanical counter Milling stop indicator: Mechanical counter Milling spindle diameter: 30mm / new milling spindle Spindle speeds: 1500, 3000, 4500, 6000, 9000 Motor power: 4 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Crodpfx Aezdzbuektoi Machine length: 1000mm Machine depth: 1200mm Weight: 580kg

Condition: excellent (used), Stainless steel substructure Crjdpfe Ab Izmox Aktsi Cast iron pan 400 V 16.25 kW 1,400 x 850 x 760 mm (W x D x H) -20% discount when picking up the item at the Erfurt location by October 30, 2026.