Used Wire Saw for sale (9,732)

Condition: used, Year of construction: 2011, 1 unit panel saw HOLZMA HPP250/38/38 with piping, as per photos and inspection, self-disassembly required. Colour: grey. Year of manufacture: 2011. Condition: used. Payment method: advance payment by bank transfer. Storage location: carpentry workshop/Hall 1. Shipping: Pickup only – shipping is not offered for this item! Nsdpfx Aox Ifbcjgzewr

Condition: used, Year of construction: 2015, cutting diameter 225 mm saw band length 2450 mm cutting width 240 mm dimensions of saw-band 2450 x 27 x 0,9 mm capacity 90 degrees: flat 240 x 160 mm capacity 90 degrees: square 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 155 x 115 mm capacity 45 degrees: square 140 mm capacity 60 degrees: round 90 mm capacity 60 degrees: flat 90 x 90 mm capacity 60 degrees: square 90 mm weight of the machine ca. 240 kg Features: - Manual band saw machine - One-sided miter Nsdpex Hp Dxjfx Agzewr - Automatic lowering of the saw bow - Cuts from 0° to 60° left - Coolant device

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, AGIECUT Progress V2 Year of manufacture 2009 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage Nwedpfxsvax Iuo Agzjr With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator with power module AGIEVISION control unit Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Year of construction: 2000, operating hours: 4,800 h, condition: ready for operation (used), General Data Machine weight 1200 kg Measurements height 2000 mm Nwsdpfjx H U Ebex Agzsr Dimensions Machine Length 3200 mm Control Unit Brand FANUC Model 18i-W Main Drive Number of axis 5 Movement X-Axis Movement 320 mm Z-Axis Movement 180 mm Y-Axis Movement 220 mm This 5-axis FANUC ROBOCUT α-0iA was manufactured in 2000. It features a travel distance of X-axis 320 mm, Y-axis 220 mm, Z-axis 180 mm, U-axis 120 mm, and V-axis 120 mm. With a maximum workpiece weight of 500 kg and total power consumption of 13 kVA, it's equipped with a Fanuc 18i-W control system. Consider the opportunity to buy this FANUC ROBOCUT α-0iA wire edm machine. Contact us for more information about this machine. Application Types EDM

Condition: excellent (used), Year of construction: 2001, Mayer FH2-3520 Veneer Saw, precision-cutting saw with jointing unit (planer head) and veneer alignment table Robust machine construction by Mayer A video of the machine in operation can be provided upon request. For tear-free, joint-tight cutting of veneer, including thick-cut veneer Maximum cutting length: 3500 mm Nwodex Hqtzspfx Agzsr Saw unit and jointing unit are combined into a single assembly, so only one unit needs to be moved. Easy-to-guide saw unit glides on linear guides. Rear support table with pass-through finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Drive motor for saw: 1.8 kW, milling (planing) unit: 1.2 kW The motors can conveniently be activated via the handle and only run when needed. Fine-cut blade fitted with carbide tips, sharpened Planer head Z4, fitted with new carbide reversible blades, spare blades included Practical front veneer storage, extendable for the planer unit Extraction connection 100 mm with extraction duct CE mark Operating manual Service tools Original paintwork, only minor touch-ups Dimensions approx. 5050 x 1700 x 1400 mm (L x W x H). Weight approx. 900 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available in our warehouse—see "Other offers from this supplier."

Condition: used, Year of construction: 2007, Carriage length: 3000 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilting adjustment: electric Rip fence adjustment: handwheel Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 2800 / 4000 / 5500 rpm Nodpfxex I Ah Tj Agzswr Motor power: 7.5 kW Extraction connection: 80 and 120 mm Machine length: 3500 mm Machine width: 1900 mm Weight: 1200 kg

Condition: used, Year of construction: 2000, 1 pc. ALTENDORF F45 CE panel saw Nodpfxex Ifaxe Agzewr Max. saw blade diameter 450 mm, includes various saw blades and cabinet, angle guide, fence, voltage 400V, current 13.5A, power 5.5kW, as per images and inspection, self-dismantling required Color: green Year of manufacture: 2000 Condition: used Payment method: advance payment by bank transfer Storage location: Carpentry workshop / Hall 1 Shipping: Collection only – no shipping offered for this item!

Condition: new, Band saw machine Make: OPTIMUM Model: S 275 NV Art.Nr.: 3300265 Condition: new machine Section (round): 225 mm Cutting speed: 20-90 m / min Nodpfedynpcjx Agzjwr equipped as standard with: -Horizontal vise -Back fence - automatic shut-off after the end of the cut -Späneräumbürste -Coolant system -Manual

Condition: good (used), Scoring circular saw blade, scoring circular saw blades Nodpfxeb D I Ato Agzjwr -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Year of construction: 2000, condition: ready for operation (used), Main Drive Number of axis 5 Nwodpfsx H A Nusx Agzer Movement X-Axis Movement 320 mm Z-Axis Movement 180 mm Y-Axis Movement 220 mm This 5-axis FANUC Alpha 0iA wire EDM machine was manufactured in 2000. It features X, Y, U, V, and Z axes with a maximum travel of 320 mm, 220 mm, 120 mm, 120 mm, and 180 mm respectively, all at speeds up to 900 mm/min. It can handle a workpiece mass up to 500 kg and has a machine mass of 1.2 tons. Power capacity is 13 KVA. Consider the opportunity to buy this FANUC Alpha 0iA wire EDM machine. Contact us for more information. Application Types EDM

Condition: new, total height: 4,700 mm, cutting width (max.): 1,100 mm, overall weight: 19,000 kg, power: 90 kW (122.37 HP), saw blade length: 10,450 mm, The VTZ PLUS is MEBOR’s exceptionally FAST vertical band sawmill system, designed for high capacity as well as quality-oriented sawing. Its SMART design combines speed, energy efficiency and high recovery of wood. Nwedsrlm N Ujpfx Agzsr

Condition: used, Cutting height at 90°: 135 mm Cutting length: mm Mitre range horizontal: - Mitre range vertical: -60° to +60° Roller conveyor / support table: no Nedpfx Asx I Ai Dogzswr Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Workpiece clamp: yes Spray device: yes Extraction port: 100 mm Machine length: Machine width: Weight: 110 kg

Condition: used, Year of construction: 2005, Technical Data: Cutting Capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm Nwsdpfx Agsx Irx Ijzsr +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest remnant length: 35 mm Total connected load: 2.0 kW Saw motor, frequency controlled output: 1.5 kW Infinitely variable cutting speed (frequency controlled): 20 – 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and Weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height (upper section lowered), approx.: 1460 mm Height (upper section raised): 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Carbide saw blade guides, replaceable - Mechanical material clamping - Hydraulic feed for cutting - Mechanical saw blade tensioning - Saw blade cleaning by a driven, easily replaceable wire brush - Coolant system: feed via 1 coolant nozzle and 1 coolant hose, tank capacity approx. 45 l, pump performance 16 l/min

Condition: new, ROGI SAWING MACHINE TYPE WDS-400 SEMI-AUTOMATIC Saw Blade Size ----- 4650 x 34 x 1.1 mm Sawing Speeds ----- 19/30/50/65/90 m/min. Motor Power ----- 4 kW - 400V - 3 Phase Weight ----- 1000 kg Cutting Capacity ----- 400 mm / 500W x 400H mm INCLUDES Bimetal saw blade Workpiece stop Saw blade guide with carbide inserts Hydraulic vice Coolant pump Hydraulic lowering cylinder Motor protection switch Automatic end stop Nodpfx Agex N Iawozowr

Condition: good (used), Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW Nodpfxjr A H R To Agzswr -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Weight 570 kg Nedpfxjv A Hgds Agzowr Total power requirement 3 kw

Condition: new, total height: 3,300 mm, cutting width (max.): 1,200 mm, overall weight: 15,000 kg, power: 37 kW (50.31 HP), saw blade length: 7,750 mm, blade width: 160 mm, The PLUS are Mebor’s most advanced horizontal sawmills, with the latest innovations. PLUS band saws bring more production and speed, as well as versatility. The HTZ 1200 PLUS is performing with unmatched productivity in the price range. It is relied on by sawmills on all continents, from soft wood sawmills to quality oriented hardwood sawmills. Key features: • Fast return speed & servo controlled blade positioning, • Fast automatic control preventing operator delays, • High speed hydraulic log manoeuvring functions, • Precision made machine with top quality components. Nwsdjricwqepfx Agzer Mebor System® is our own system of horizontal band saws, which sets us apart from our competitors. With a Mebor band saw you will increase your productivity and yield, as well as decrease labour costs. Wood is unpredictable and for this reason Mebor band saws have a strong and robust construction. It guarantees reliability of functioning and minimises maintenance costs. Band saws adapted for your needs – for small and big sawmills.Every Mebor band saw is custom made ; therefore we supply each customer an optimal band saw for his needs. We will advise which model is most suitable for your needs and requirements. We will also adjust the configuration of the band saw; for example the distances between clamps according to the lengths of logs, equipment etc. Automatic board removing (Mebor System® ) We were the first to introduce the board removing system, which saves your time. After the band saw cuts a board, the board pusher pushes it off the band saw bed during the return of the band saw head. Simple and automatic, with no manual work. Automatic functioning - Mebor System®. It leads the operator during cutting. It provides important information, which helps him choose the optimal cutting for best output. Manual control is also available for less demanding users. Full log manoeuvring equipment is available for fast and effortless work. Precision of cutting is ensured by the solid construction and wide blades. All Mebor band saws are using wide blades (80-210 mm wide). The fact is that wide blades provide higher sawing speed, as well as better sawing precision. The high quality of your products will increase the satisfaction of your customers.

Year of construction: 1989, condition: used, cutting diameter 420 mm saw band length 6300 mm table height 700 mm 0 5,5 kW cutting speed 20-130 m/min min. cut-off length 6 mm min. dia. 10 mm weight of the machine ca. 2,9 t dimensions of the machine ca. 2,4x3,3x2,4 m Nwodpfx Agjrc I H Ejzer Fully automatic band saw, saw band tension hydraulic, cutting feed continuously variable, material feed hydraulic, automatic feed with horizontal vice. Clamping force: approx. 400-2000 daN Coolant supply via three coolant nozzles, approx. 135 l, approx. 30 l/min.

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner Njdpfxsh U U S Re Agzjwr -Manufacturer: Kaltenbach, Double miter saw type DKL 500 -Cutting length: 245 to 4180 mm -Saw units: swivels 45° -Saw blade: Ø 490 mm -Accessories: incl. additional saw blades, see photos -Overall dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9000x1400x1680 mm Nodpfx Agsv A E Ndjzewr Weight 1600 kg Total power requirement 7,5 kw - Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kg

Condition: new, total height: 2,210 mm, cutting width (max.): 1,000 mm, overall weight: 7,000 kg, power: 22 kW (29.91 HP), saw blade length: 7,200 mm, The HTZ 1100 PRO is a fast, versatile band saw. Suitable for either production or quality oriented sawmills, who are looking at lowering their operation costs, while increasing quality of sawn wood and production. Nedorllanjpfx Agzswr

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg Nwjdpfx Agogzc Iyjzsr

Condition: new, total height: 2,450 mm, overall weight: 1,700 kg, cutting width (max.): 800 mm, power: 22 kW (29.91 HP), number of blades: 2, Mebor board edgers are recognised by their strong and robust construction, giving reliability, high performance and low maintenance costs. VR machines can use up to 3 (5) moveable heads (blades) and are designed for both edging of boards and multi-ripping of cants. Mebor’s precision made frame ensures high precision of cutting and high quality of your products. Simple to highly automated versions are available. Nwodpfxjrpmmae Agzsr

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° Nwsdpfxjgylq Is Agzor -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Condition: used, Year of construction: 2022, functionality: fully functional, COMPLETE SAWING LINE - VTZ 1400 PLUS log band saw with BM 900 chipper canter, including all necessary conveyors - FRC chipping edger with 3D scanning and optimisation, including all necessary conveyors Nwedpfx Aoxlym Eogzjr - Automated stacking machine - Waste conveyors