Industrial trailer VAL30 – 10 tons

Multi-Trans VAL30

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in internal company transport. Combined Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Payload: 16 t at 6 km/h with evenly distributed loading (area load) of the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covering made of softwood planks, all-round edge protection. Steering: Four-wheel stub-axle steering, drawbar tiltable, removable, and can be repositioned from front to back, coupling height at the towing vehicle approx. 320 mm (other coupling heights only permitted upon notification), towing eye according to DIN 74054, diameter 40 mm, drawbar drop protection according to UVV. Chassis: Both axles steered, solid rubber elastic tyres approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Bodpfx Agoxrtdqsdjdf Paintwork: Topcoat RAL 5002 Ultramarine Blue. Optional Equipment: - 2 lashing rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, For sale: 2 tent halls, each 120 x 18 meters, manufactured by DallGruppen. Original price for both, without side doors: 2.4 million euros. Internal height approx. 18 meters. Bdodpfey Nnuhex Agdsf Disassembly by the buyer in Denmark (a truck with a crane is required). Not suitable for use in Norway, Sweden, and Finland due to snow loads of approximately 100 kg/m2. Inspection welcome. See video here in the advertisement. More information and video available upon request.

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Additional equipment: Bedsxrtb Nepfx Agdsdf Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Condition: excellent (used), total length: 4,100 mm, total width: 2,100 mm, total height: 560 mm, color: blue, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved roadways in internal company transport operations. Bsdexrtgfspfx Agdedf Payload: 6 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Main Frame: Robust welded construction made of profile steel sections. Loading Area: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, equipped with phenolic resin-coated plywood panels. Bumpers at the ends of the frame. Steering: Four-wheel pivot steering, drawbar tiltable, non-reversible, and non-removable. Drawbar automatic safety lock according to UVV regulations. Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with tapered roller bearing and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Miscellaneous: - Collision guards at the frame ends made of drop-shaped half-shells. - All-round anti-slip protection, approx. 25 mm high. - Side underrun protection at the height of the diagonal bar. - Pin coupling with captive bolt, bolt with spring safety, diameter 30 mm at the rear end. - Double-acting wheel chock with chain. - Two rear reflectors at the rear end. - Prepared for roof structure.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Bdodpsv Hxbbefx Agdjf

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm Bjdpjw Rf S Eofx Agdodf control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm Bdodpfx Agsvc Ax Nodjf cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding Bdodjtqf Rzepfx Agdef 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Bodpfx Ash Nypfjgdedf

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit Bsdjwh Sigjpfx Agdsdf - Dielectric