Geared motor 0.75 kW 136 rpm

Nord SK 2080A-80 L/4

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: Nord, gear motor -Gearbox: Type SK 2080A-80 L/4 i= 16.87 -Speed: 83 rpm -Engine: Nord Type SK 80L/4 -Power: 0.75 kW -Protection class: IP54 -Shaft: Ø 30 x 105 mm -Number: 2x motor available -Price: per piece Fodpfewl Uqusx Aftspr -Dimensions: 320/290/H200 mm -Weight: 21.5 kg

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Fedpju Su Apjfx Aftspr Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: used, ALREADY PACKED ‼️ IMMEDIATE DELIVERY ‼️ Fpjdpfswakktjx Aftor 🔥 Several pieces of Fröling Turbomatic (TMC) wood chip boilers for sale – 35 / 48 / 55 / 110 kW outputs! 🔥 Quality, automated Fröling TMC series biomass boilers for sale, with different outputs. An ideal choice for families from single-family homes to small industrial facilities, where reliable, economical heating is important. ⸻ Available types: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demand • Fröling TMC 55 kW – larger workshop, farm • Fröling TMC 110 kW – for industrial/agricultural systems ⸻ Features: 🌲 Fuel: wood chips, pellets, shavings 🔁 Automatic operation: dosing, cleaning, ash removal 🧠 Advanced combustion control, intelligent control ♻️ High efficiency, low emissions 🇦🇹 Fröling – Austrian premium biomass technology 💥💰 Prices vary by type – inquire by phone or email! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Wide selection of used Froling boilers, with expert support.

Year of construction: 1988, condition: good (used), Carlo Salvi 1 die 2 blow Fpsdpfx Afshrdmxetjr Model 780/SV Maximum Cutoff dia.mm: 6,35 Max. Cutoff length mm: 97 Max. K.O. length (die side) mm: 80 Max. Speed, pcs, per minute: 360

Condition: new, Year of construction: 2025, operating hours: 1 h, Schäffer 2630 Yard Loader New machine, approx. 3 operating hours Equipment: ROPS driver protection canopy Kubota diesel engine D1703M 18 kW / 25 HP Rear counterweight plate Hydraulic tool locking Restraint system Hydraulic fast gear Additional equipment: Counterweight 81 kg Reinforced gear pump Fpodpfx Afoxqt Nketor Mechanical detent for auxiliary control unit Lighting system preparation LED work light Main battery switch Tow pin + lashing eye Tires 31x15.5-15 AS Euro hitch | Internal no.: 11314119

Condition: used, grinding wheel diameter 0 mm power requirement 0 kW following grinding spindles available: Fsdpfx Afsd Ig U Retspr 1 Stck. Fortuna FAVS 100 R, 250.250, 12.000 U/min - à 700 Eur 1 Stck. SKF 1033293-1 (ex Hoefler) - à 1200 Eur 1 Stck. SKF 1033293-2 (ex Hoefler) - à 1200 Eur 1 Stck. SKF 1040329 (ex Hoefler) - à 1700 Eur

Condition: used, diameter 5-20 mm length 10-200 mm tool adaptor MK Fsdpfoi Eg Rtox Aftepr different drilling, milling and turning tools and other accessories. Drills, tapper and mills 30 Euro/kg other accessories: 10 Euro/kg

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Turret head B-axis with 1° division Belt filter system included Fpedsvt A Rtjpfx Aftsr

Condition: good (used), Year of construction: 1997, machine/vehicle number: 24625, COLD HEADER CARLO SALVI 246/TR 2 Die 4 Blow Max. Cutoff Diameter: 8 mm Max. Cutoff Lenght: 75mm Max. K.O. Lenght First Die: 85 mm Max. K.O. Lenght Second Die: 60 mm Max. K.O. Lenght (Punch Side): 10 mm Fpedpfx Aehn R E Isfter

Condition: good (used), Max Diameter: M6 Max thread length: 42mm Fpedpfx Ashtal Reftjr Max length of rods: 75mm Year: 80's