Screw compressor 7.5 kW

Renner RS-Pro 7,5

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0169, Exhibit in stock immediately available (Plug and Play): RENNER RS-PRO 7.5 - 10 bar oil-injected screw compressor The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 7.5 kW Delivery quantity: 1.09 m³ / min Sound level: 63 dB (A) Compressed air outlet: 1/2 " Hfodpfxeity Ecj Af Aek Dimensions length x width x height: 540 x 553 x 1014 mm Weight: 198 kg Operating hours: 0,5 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Hfodjwra S Rspfx Af Ajk Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2014, operating hours: 10,000 h, pressure: 10 bar, operating pressure: 10 bar, For sale: Certuss steam generator with gas burner. The unit is in very good condition. Only 10,000 operating hours. Model Junior 120, year of manufacture 2014. Steam output 120 kg/h. Maximum steam pressure 10 bar. Delivery available for an additional charge. Inspection on site possible. Please contact us with any questions. Hsdpfx Afeyhrp Es Aofk

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment Hfedpjuggb Defx Af Ajk  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2016, operating hours: 6,700 h, Kaeser SM 12 (2016) – Screw Compressor in Excellent Condition For sale: Kaeser SM 12 screw compressor from 2016 in excellent, well-maintained condition. Reliable, quiet, and energy-efficient compressor – ideal for workshops, print shops, or manufacturing facilities. Technical specifications: Manufacturer: Kaeser Kompressoren Hfsdpoxprwksfx Af Aek Model: SM 12 Year of manufacture: 2016 Motor power: 7.5 kW Free air delivery: approx. 1.1 – 1.3 m³/min (depending on pressure level) Operating pressure: 8 / 10 bar Voltage: 400 V / 50 Hz Integrated Kaeser Sigma Control Basic Low-noise operation, compact design

Condition: new, table length 1300 mm table width 800 mm stroke height 1015 mm weight max. in kg 3000 kg Hsdpfx Aevn Uzmsf Aofk 220 mm connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: good (used), Year of construction: 2023, machine/vehicle number: 231293, Offer 25452 Technical data: - Operating hours: 754 h Hfodpfx Aox I Izrjf Ajk - Working pressure: up to 13 bar - Delivery rate: 860 l/min - Drive: 400 V / 7.5 kW - Galvanised air receiver: 500 l - Integrated dryer RENNER Type RKT + 0065 - Automatic condensate drain - Required space: approx. W 650 x H 1650 x D 1400 mm - Weight: approx. 350 kg

Year of construction: 2018, condition: used, Compressor design: screw compressor Pressure: 10 bar Volumetric flow rate: 1080 l/min Condensate drain: automatic Weight (approx.): 240 kg Motor power: 7.5 kW Electrical connection (approx.): 400 V Workshop overhauled: new filters, oil change, etc. Hodpfx Aex Hwq Hjf Aefk Location: customer

Condition: like new (used), Year of construction: 2020, operating hours: 8,931 h, functionality: fully functional, Screw compressor Kaeser CSD105SFC Inverter integrated 55 kW 8.50 bar 10.01 m3/min Hsdezcb Iyspfx Af Aefk Year of manufacture: 2020 Operating hours: 8,931

Condition: good (used), Year of construction: 2000, Tempering unit Overall dimensions: 600 x 700 x 1600 mm Weight: 157 kg Power 6kW Voltage: 230 V Hsdpfx Ajgvddpef Ajfk Refrigerant type: R134.6