Dewatering equipment

REWA 470/27

Condition: used, Year of construction: 1993, 1500 mm tank diameter / tank height 1500 / 500 mm turning speed range 1500 U/min voltage 380 V volumn 300 Liter power requirement 18 kW weight of the machine ca. 1,2 t Chedpfsxq Hg Aox Ah Ija dimensions 1,5 x 1,6 x 1,6 m Vibration dryer See ??pictures

Condition: new, Year of construction: 2025, machine/vehicle number: 472684923, Gasparin Jaw Crusher GI107CV Vesuvio, mobile jaw crusher on a tracked chassis The mobile crusher GI107 VESUVIO stands for versatility and can be configured in two different ways. Equipped with a Grizzly vibrating feeder (GI107C), it is suitable for more traditional applications. With a vibrating feeder and pre-screen, the machine (GI107CV) is suitable for demanding applications with high fines content and high material moisture. With its standard equipment featuring the patented HCS system (Hydraulic Crushing System), VESUVIO is the best solution for the requirements of professionals and rental companies. Production capacity: approx. 320 tons/hour Patented HCS system Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Jaw gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3000 mm Dust extraction Tank pump Magnetic separator Warranty 1 year, up to a maximum number of operating hours from the start of operation Technical data: Jaw crusher 1020 x 700 mm Crushing gap from 45 to 180 mm Hopper 5 m³ - 2000 x 3960 mm Two-deck vibrating screen 1020 x 1800 mm Main conveyor belt 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 HP / 60 kW, emission stage V Control panel Tracked chassis 400 x 3310 mm Weight: kg Transport length 12900 mm Transport width: 2530 mm Transport height 3200 mm Further information: Application: Construction, General condition: very good, Technical condition: very good, Optical condition: very good Chsdpohd I Rzofx Ah Ija

Condition: good (used), Year of construction: 1994, 2-sided planing machine, top and bottom Constant table (always the same feed height) Max. planing width: 600 mm Csdpfx Ahohuthyo Ijha Max. planing height: 280 mm Planer shafts with strip knives Ready for immediate use.

Condition: used, System: used piston diaphragm pump / pump Chodpedkdi Tsfx Ah Ioa Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm Codpfx Ahjqpdkcj Isha - Capacity: about 7,500 - 15,000 dowels/hour

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Codpfx Asxk U Aroh Ioha Maximum pressure: 12.75 bar Power: 30 kW Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Motor power: 40 HP Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Equipment: SMARTLINK Origin: Made in Belgium No liability is accepted for the accuracy, completeness, or timeliness of the information provided.

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Chedpjlccvmofx Ah Ioa Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Motorized tank/boiler turning device with rail-mounted chassis Technical data: - Total load capacity, driven + follower unit: 40,000 kg - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm Chedpfxjhcnhme Ah Ija - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be prepared. Grinding cell with Kuka KR 180 grinding robot Berger grinding cell 2012 (external grinding A1) - Total weight approx. 6300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture 2011 - KRC 4 controller - Additional axis (7th axis) BSS10 belt grinding station - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm Chjdsg Saqvepfx Ah Iea - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Tool changer cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm We have 4 such cells.

Condition: used, System: Used chamber filter press Type: Aquachem EC 470 AK25 Application: Sludge dewatering, sludge treatment Year of manufacture: 2005 Filter plate size: 470x470 mm Cjdpfx Ajwqyfueh Ioha Number of plates: approx. 20 Filter plates: PP Cake thickness: 25 mm Filter cloths: optionally available, to be matched to the medium Filter area: approx. 12 m² Press volume: approx. 66 dm³ Filter pressure: approx. 15 bar Discharge: closed Pump technology: optional Filter cloths: optional Drip tray: yes Purchase or rent: Inspection of the systems by arrangement at our facility.