Gas-fired preheating furnace

VEI-Engineering VEI_KO_V_GB_400-350

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Godpoqakbrjfx Af Toua Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

Condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace Godpfxeg Dgymj Af Tsua internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material Godpfx Asd Iipmjf Tsua 6. Vice opens

Condition: ready for operation (used), Year of construction: 2023, operating hours: 154 h, travel distance X-axis: 215 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 605 mm, total height: 1,725 mm, total width: 1,690 mm, overall weight: 4,650 kg, controller manufacturer: MAZATROL, controller model: SMOOTH Ez, number of axes: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 min-1, with a motor power of 15.0 kW. It includes a 12-position turret and rapid traverse rates on the X, Y, and Z axes are 30, 10, and 30 m/min respectively. Contact us for more information about this machine. Additional equipment • Transformer for Europe (CE) • Roller guide with spherical roller bearings • SD memory card I/F + USB memory I/F • 1 Set of control keys • Foundation kit (steel plates) • CE Marking (With noise filter) • C-axis Positioning 0.0001° Increment • 12-Position Turret • Y-Axis Control • Interface bar feeder Extra Information Automatic part trapper High pressure cooling Preparation for chip conveyor 8" Open chuck Measuring arm Signal tower Rotary center Chain chip conveyor with side discharge Cylindrical and polar coordinate engraving function Automatic pecking cycle with load detection Gujdpfx Ajx D R Svof Tja Quick-change cutter holder system Bar diameter Workpiece Maximum swing diameter: 695 mm Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar diameter: 65 mm Maximum chuck weight: 200 kg Maximum workpiece weight: 500 kg Distance between spindle nose and end of workpiece: 81 to 686 mm Turret Number of tool positions: 12 Tool size (External turning): 25 mm Tool size (Internal turning): 40 mm Tool size (Driven drill): 20 mm Tool size (Driven end mill): 20 mm Tool size (Driven tap): M20 Indexing time 1 step: 0.23 s Indexing time full revolution: 0.63 s Tail Stock Center bore (morse taper): MK No. 5 Tailstock travel (body movement): 565 mm Maximum thrust: 5000 N Tools Milling spindle power (continuous power): 3.7 kW Milling spindle power (40% ED): 5.5 kW Maximum milling spindle speed: 4500 min-1 Minimum milling spindle speed: 20 min-1 Media Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions Machine Depth 2785 mm

Year of construction: 2006, condition: refurbished (used), HYDRAULIC PRESS MECAMAQ PRESSURE 350t STROKE 350mm TABLE LEFT RIGHT 600mm TABLE FRONT BACK 750mm POWER 15kw Dimensions: Height: 2,9m Guedpfxefmqqle Af Tja Width: 1,9m Length: 1,3m Weight: 5.700 kgr

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,265 h, laser power: 5,000 W, This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Trulaser 5030 (l56) documentation • Machine software • 1 additional postprocessor • Trutops laser programming course Extra Information General Data Machine: Closed machine frame Torque drive combined with linear direct drive Closed beam guidance via fiber optic cable (LCC) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 17* touch color screen Wide longitudinal conveyor belt TruDisk power supply via the machine Work area lighting Positioning Laser Guides: Spray direction PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Coupler cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device TRUMPF Laser: TruDisk 3001 solid-state laser with one LLK output Fiber optic cable according to standard layout Laser cooling unit (water-air) Excitation via Pump diodes Gjdsx D Hg Aopfx Af Tjua Laser power control Subject to international export controls according to EC Dual-Use Regulation 428/2009 (lasers covered by 6A005) Cutting Head: Universal cutting unit with fully adaptive lens system Single-head cutting strategy Protective glass to protect against lens contamination ControlLine: Height control and outer sheet edge trimming Control: SINUMERIK 840D SL control system Simple and advanced workshop programming Fast re-production Integrated technology data Automatic shutdown Programmable cutting gas/pressure selection FastLine, FlyLine, AdjustLine Data Transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified safety glass, door on the right Electric retractable roof Voltage and Frequency: Voltage: 400 V Frequency: 50 Hz Color: Standard white - blue RAL design 250 20 20 - blue NCS S 0505 RBOB - white Solid-state Laser: TruDisk 5001 with 1 air cooler outlet Additional Features: Nozzle changer BrightLine fiber DeteciLine: Precise sheet position detection Clamping clamps (2 pieces) Integrated camera (Full HD) for process monitoring with monitor interface Individual oil feed into the network ClitMaster Gompact retrofit capability

Condition: used, Year of construction: 2003, operating hours: 10,120 h, total length: 1,800 mm, total height: 1,700 mm, total width: 1,200 mm, Empty weight: 1.300 kg Price: On request Shredder Untha LR 630 Year of construction 2003 Input opening: 624 x 792 mm Throughput speed: material and sieve dependent Rotor diameter: 248 mm Rotor speed: 86 - 96 rpm Engine power: 15 kW Cutting system: 17 knives Sieve diameter 24mm Transport dimensions 1800*1200*1700mm (L*W*H), Weight 1300kg - Year: 2003 - Documentation available: No Guodowh Na Nspfx Af Tea - CE marking present: Yes - CE certificate present: No - Serial number: LR632318 - Operating hours: 10120 - Transport dimensions: 1800mm x 1200mm x 1700mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1998, condition: like new (used), functionality: fully functional, SERAP CRUST FLOW P ID.NO. 2797 Gjdpfsumbyiox Af Teua Serap Crust flow P tunnel which allows complete crust freezing of delicate and soft foods, etc. such as extruded biscuits, pasta, mousses, ready meals, ice cream etc. Also suitable for freezing meat products before slicing.Dimensions 320 x 120 cm H 165 cm Bandwidth 40 cm

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Gusdpspugwiofx Af Tsa Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Cutting range 90° Round: 260 mm Flat: 300 x 260 mm Smallest diameter: 5 mm NC-controlled, automatic material feed with hydraulic full-stroke material clamping Easy operation via NC control with plain text display Material advance function without reclamping for short section cuts Gjdeh Tnd Aspfx Af Tjua Robust, linear-guided feed gripper with servo positioning for maximum precision Automatic adjustment of blade guides to material width Recommended options: Powered chip brush synchronized with blade speed Separate control panel 7" CE panel, network-compatible, up to 1000 data sets storable, history memory for various functions and data, etc.