Ship propeller

Schaffran Ø 1520 mm

Year of construction: 2023, condition: new, Ultrasonic filter cleaning machine, provides perfect cleaning for any type of filters. Easiest, safest and quickest method for cleaning your filters. Tailor made design for tank capacity and basket size. Constructed with AISI 304 stainless steel (AISI 316 is also available on demand) Timer for ultrasonic power. Automatic or manual liquid fill / discharge Electrical heating with resistances. 28 Khz ultrasonic power. A lot of extras and options are available. Ultrasonic filter cleaning machine Gedpfxed Izzzs Al Uobu Please feel free to contact with us for other details.

Condition: ready for operation (used), A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible. Gbedpfx Alox Ivkze Uju

Year of construction: 1997, condition: used, Used progressing cavity pump Manufacturer: Seepex Type: BN5/6L Com. No.: 97935 Gsdpfx Ajilpwbjl Uebu Year of construction: 1997 Pressure level: 6L Dimensions: L 1150mm

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/8081, Offer Number: D08L/8081 Machinetype: straightening and cutting machine Make: WMW Type: UDARA10 Constr. year: 1980 diameter range: 3-10 mm Gbsdpfswi Svcjx Al Uju cutting length: 2000 mm speed - meters/min: 22-71 Location: In our warehouse

Year of construction: 2005, condition: ready for operation (used), Machine tool manufactured in 2005. This KOMAX GAMMA 333 PC features a configuration with multiple MCI711 presses equipped with contact strip cutters and various feed options. It includes two 2-meter long conveyor belt extensions for efficient operation. If you are looking to get high-quality automation capabilities, consider the KOMAX GAMMA 333 PC machine we have for sale. Contact us for further details. • Machine configuration: • Side 1: • 1x MCI711 press with contact strip cutter; Rear contact feed - passive • 1x MCI711 press with contact strip cutter; Rear contact feed - passive; Side contact feed active - with paper strip winding • Side 2: Godpfjy Ukfaox Al Usbu • 1x MCI711 press with contact strip cutter; Rear contact feed - passive • Control software: TopWin 2.4.3.24 • Note: Machine sold without mini-applicators Additional equipment • Conveyor belt: 2x 2 meter long conveyor belt extensions

Condition: used, Year of construction: 1988, power: 177 kW (240.65 HP), gearing type: other, fuel type: diesel, first registration: 01/1988, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Daimler-Benz V8 engine type OM 422, operating hours approx. 2000! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gbodpfevhh Dnex Al Usu - .

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, 1. Currently, everything is designed exclusively for use with Inarca connectors/housings. To use other connectors that are not physically identical to Inarca versions, conversion is necessary (the Komax team is most familiar with this). 2. Double crimping is not possible; only single crimping is supported. 3. The ZETA 633/654 machine is equipped with 4 presses. The ZETA 633/656 machine has 3 presses (refer to the PP image from the first email). 4. The Zeta 654 machine features automatic sleeve insertion on the fastons. This is possible for 6.3 and 4.8 terminals. 5. The system can be adapted for different connector pole counts. We used connectors with various pole configurations (2P, 3P, 4P, 7P, 8P), depending on the customer’s requirements. On the 654 machine, connector feeding into the machine is automatic via a vibratory feeder. On the 656 machine, connectors are manually placed onto a pallet (one is inserted, the other pallet is in the stack and conductors are automatically inserted). 6. The presses are “smart” and automatically adjust the clamping height to the conductor. 7. The machines do not have an injection molding unit. 8. In practice, the maximum processed length has been 1,500 mm. According to technical specifications, even longer lengths are possible (see technical data below for each machine). Gedpjy Nfm Iefx Al Usbu 9. On the Zeta 656, connectors can be crimped on both ends of the conductors. On the Zeta 654, this is only possible on one end (see image below).

Year of construction: 2010, condition: used, Sugden Engineering Twin propeller Mixing Vessel 200 L Stainless vessel, 2 top mounted paddle stirrers, vessel 45 degree sloped base to outlet. Gedpfx Alob Uaakj Uobu