Cross roller guide

Schneeberger 9700

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Face grinding machine Year of manufacture: 1985 30 kW grinding motor Modicon control system Prodpfsd E Np Eox Adxec Magnetic control, 6 stages Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Year of construction: 1981, condition: used, Manufacturer: Deckel Type: FP 4 Table: Predpfxoihp U Ds Adxoc Dimensions: 1000 x 470 mm Longitudinal movement (X-axis): 700 mm Transverse movement (Y-axis): 400 mm Vertical movement (Z-axis): 450 mm Spindle overhang: 50 - 450 mm Spindle mount: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5 - 1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5 - 1600 rpm Machine weight: 2000 kg Feeds (X, Y, Z axes): 18, 10 - 500 mm/min Accessories: Milling head with quill Table: 1000 x 470 mm

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm total power requirement 5,5 kW 500mm grinding wheel diameter New servomotors in x and for the workhead. Prjdpsuwv Idefx Adxjc Photo of already delivered machine in UR equipment. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customer's request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -Increase of the center height to max. 225mm -Speed control for the grinding spindle Translated with (free version)

Condition: good (used), Year of construction: 2005, operating hours: 4,630 h, turning length: 1,585 mm, spindle motor power: 30,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,585 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 2,700 mm, overall weight: 14,500 kg, Multi-tasking lathe MAZAK - INTEGREX 400 III-S MACH-ID 9809 Make: MAZAK Type: INTEGREX 400 III-S Control: MAZATROL 640 MT PRO Year: 2005 Only 4630 Cutting hours Automatic door 40 CAPTCO C6-Tool magazin Robot interface 5 Axis simulteneous package Sub spindel with C-Axis and 0,0001 Degree Internal Grundfos 15 Bar coolant Chip conveyor Optional tooling package with 40 holders Max. turning Ø: 850mm X-Axis: 630mm Y-Axis: -115 to + 115mm Z-Axis: 1585mm B Axis: -30 to +195° Spindle bore: 102mm Speedrange: 3300Rpm Spindle power: 30kW Subspindle speeds:3300Rpm Subspindle bore: 102mm Prsdjz Ata Hjpfx Adxoc Subspindle power: 26kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm B-Axis power: 19kW Chip conveyor: Yes Tool eye: Yes Hours: 4630H Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), SURFACE GRINDER Prsdsdwn Tpspfx Adxjc 3000x300mm ALPA RVA 3000 Power: 15kw

Condition: as good as new (ex-display), Year of construction: 2024, Compact, precision CNC rotary table suitable for single-piece or small-batch production in precision engineering. A horizontal or vertical configuration is possible. You can't buy better quality! - Made in Germany - It can be used as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, milling slots, or on tool and surface grinding machines. Square, hexagonal, and gear milling of any pitch, or 3D machining are possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is powered by a controlled 1.8-degree stepper motor with 3.2A and a holding torque of 1.2 Nm. The worm and worm gear are manufactured in-house, guaranteeing the highest precision. The pair is mounted on four ball bearings and adjusted for zero backlash, and can be readjusted. Pedpfsd Erdrex Adxorc The one-piece, stable output spindle is equipped with a faceplate, d=108 mm, with an MK 1 internal taper and a through hole of 10.3 (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with a power supply is included in the package. The optimized pre-programming is done in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental repeat cycles, right and left travel, and cycle pauses, which can of course be programmed. With the software you can: Travel programs and cycles; absolute or incremental travel values. The actual value of the rotary axis can be easily queried at any time using the software. Using an output, you can receive start pulses from an NC machine. Complex scaling divisions, transverse bores or gears can be produced quickly. In addition, you can now use a start pulse to run several different travel angles one after the other. For example, incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees, with or without a pause, or rotate back. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and reference commands can now be controlled externally by your NC control system using M-functions. Optional: Locking air with splash guard. We can offer standard clamping devices for your applications. Furthermore, we have the possibility to quickly and inexpensively manufacture special clamping devices for you. Special accessories: 3-jaw chuck 80 mm: 125 Euro # 600011 3-jaw chuck 100mm bore 25 mm and an adapter plate (center height adjustment to 80 mm): 300 Euro # 600021 Tailstock: height adjustable 60 - 80 mm: 150 Euro # 600030 Clamping device for ER 25 collet with nut: 125 Euro # 600031 USB data cable for programming via PC: 150 Euro # 600032 Programming of your travel angles: 40 Euro # 600033 Test travel program and test report of the final inspection: 100 Euro # 600036 Collet set ER 25 up to D16 mm 10 pcs.: 125 Euro # 600037 Clamping device for ER 32 collet with nut up to D20: 125 Euro # 600097 Control cable with magnetic switch - read contact for automation without NC machine output: 25 Euro # 600099 Acceptance / Programming / Aluminum case / Software provision: 80 Euro

Condition: excellent (used), Year of construction: 2009, 3D coordinate measuring machine Measuring range X/Y/Z: 440 x 500 x 410 mm Measuring uncertainty X/Y/Z: 2.5 + 3.9L/1000 µm Pjdozvhrdepfx Adxerc Maximum table load: 227 kg Total weight: 293 kg

Condition: excellent (used), Year of construction: 1994, internal diameter 300 mm grinding depth 450 mm swing diameter 660 mm Prjdpfsyrtwrjx Adxec

Year of construction: 1987, condition: excellent (used), Edge bander WEINIG UNIVAR 10 Pjdpof Upzhsfx Adxorc

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 78 mm, travel distance Y-axis: 56 mm, travel distance Z-axis: 50 mm, General Speed: 60,000 rpm Spindle power: 0.625 kW Torque: 10 Ncm Tool holder: HSK-EZ15 Number of tools: 60 Working area Travel in X: 78 mm Travel in Y: 56 mm Travel in Z: 50 mm B-axis: -110° to +110° C-axis: 400 rpm Chip-to-chip time: 3.5 sec Rapid traverse: X/Y/Z 30/30/30 m/min Workpiece changing device Technology: Zero-point clamping system Prodpjzf Hrnofx Adxec Workpiece changing time: 10 sec Max. table load: 10 kg Equipment Chip management: Chip conveyor Coolant management: Coolant system Tool measurement: WZK length measurement / -break Other: Automation Feed 5 - retrofittable