5.000 l diesel pump station

Schneider Tankbau 5m³ Dieseltank DIN 6616/D + Zapfpumpe

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: Hsdpfx Ajtzmifjftofr -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg Hfodpfx Asqt Dmyeftjr - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, mileage: 299,000 km, power: 132 kW (179.47 HP), first registration: 03/1992, fuel type: gasoline, color: black, gearing type: automatic, number of seats: 5, Equipment: ABS, air conditioning, central locking, immobilizer system, for sale on behalf of a customer TOP condition Hsdpfxjmk Hkfj Aftsfr ORIGINAL

Year of construction: 1999, condition: used, machine/vehicle number: 20DKPE, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 20000 liter double-walled storage tank for the storage of diesel as follows . Nominal capacity 20 cbm piece 1 used but overhauled, i.e. the tank is cleaned, refurbished, primed and painted Color equipment paint RAL ; . However, you can always bring your own color wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate Piece. 1 dipstick Piece. 1 venting nozzle Piece. 1 filling nozzle piece. 1 new limit switch piece. 1 new leakage detector with filled up leakage liquid piece. 1 conductor piece. 1 suction line Form . cylindrical storage tank with feet/console tank mass length ca 6.800 mm plus diesel pump 500 mm diameter approx. 2.000 mm weight approx. 4.400 kg Storage above ground Compact diesel dispenser Penta with a digital display . Dispenser new . Hose length 3 mtr . On request also longer . Approved automatic nozzle . Pump 230 Volt max 60 Ltr/min. ===== Top on offer . Liquid fertilizer - AHL tank units in the size of 10,000-100,000 liters. Of course you can also design your tank system! All our equipment is extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. Could we convince you of our offer? If you have any questions or requests, just give us a call, one of our experienced employees will be happy to advise you. Price/ Shipping The price for the gas station is valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. Hfodjcl Sghspfx After In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank Environmental Protection Wozniack

Condition: ready for operation (used), Year of construction: 1996, A Weimer pallet stacking machine with the necessary conveyor technology is available. Pallet dimensions min.-max. X/Y: 600mm-1600mm/500mm-1500mm, capacity: up to approx. 8 pallets/min., swivel gripper arms: 90°. Documentation available. On-site inspection is possible. Hodpfx Afotpct Ejtofr

Condition: used, Year of construction: 2016, Equipment: compressed air brake, front-end loader, MX front loader T417 with electr. comfort operation Wheel weights 300 kg per side / Hfedpfx Ast Ebmmoftor

Year of construction: 1997, condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Hedpfxsiuznue Aftsfr Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: used, Year of construction: 2016, front tire size: 600/70R28, rear tire size: 710/75R38, Equipment: compressed air brake,

Condition: used, Briquetting plant consisting of: * Spänex filter tower with rotary valve * 2 x extraction fans * Spänex SHB 250 K1 briquette press The filter tower extracts the material from the production line, where it is transported to the briquetting press's material silo via a rotary valve and another fan. Material silo: 4 m³ fan: 11 & 4 kW power: approx. 6 briquettes/min Hsdpfoxp Izrsx Aftofr

Condition: new, Year of construction: 2024, The SCHORR RR500DHKAHR track dumper is specially designed for transporting heavy and bulky materials such as wood or pipes. With a payload of 500 kg and a powerful 9.2 hp single-cylinder 4-stroke petrol engine, it handles demanding tasks with ease. The robust transmission with 6 forward and 2 reverse gears ensures precise control. The powerful chain drive ensures that the dumper can also work confidently on difficult terrain, on inclines and over kerbs. The rubber tracks ensure a secure footing and offer stability on a wide variety of surfaces - from muddy fields to gravel paths. The hydraulic tipping drive of the RR500DHKAHR also offers clear advantages in the version with wooden stanchions. Even heavily loaded loads such as logs or long materials can be secured and transported effortlessly. The robust design ensures stability and a secure hold of the load, even on uneven terrain. The large hydraulic oil tank with integrated oil filter contributes to the dumper's long service life and minimizes maintenance requirements. Thanks to the powerful hydraulic system, loading and unloading is efficient and easy to handle, saving both time and physical effort. Ideal for use in the forestry sector and on construction sites, the RR500DHKAHR meets the highest standards of performance and reliability. SCHORR track dumper RR500DHKAHR - Discover the advantages: -- 9.2 HP four-stroke engine -- Self-propelled & powerful track drive -- 500kg payload -- Large and stable wooden stanchion with optimum tipping angle for efficient unloading -- Folding passenger platform as standard -- 6+2 gears Technical data: Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR500 Model: DHKAHR Load capacity: 500kg Tilt drive: Hydraulic (stepless) Travel drive: Chain Weight: 328kg Drive system Engine: Air-cooled 1 cylinder four-stroke engine (OHV) Starter: Reversing starter Power: 9,2PS Gearbox: 6 forward gears / 2 reverse gears Speed: forward gear Forward gear: max. 8km/h Reverse gear: max. 5 Liquids Fuel tank capacity: 6L (unleaded petrol) Hydraulic oil tank capacity: 3L (ISO VG 32) Transmission oil capacity: 1.5L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Max. Hydraulic oil flow rate: 9L/min Hfjdevfp Dwepfx Aftor Basic dimensions Overall length of platform (folded): 1720mm Overall length of platform (unfolded): 1920mm Total width of stanchion (unfolded): 1250mm Total width of stanchion (folded in): 865mm Total length stanchion / platform: 965mm Inner width of stanchions, top: 1175mm Stanchion inside width, bottom: 775mm Inner distance, stanchion - stanchion: 370mm Total height (handle - floor): 1050mm Overall height (stanchion - floor): 900mm Total height stanchion: 460mm Stanchion dimensions (outer dimensions) L x W x H: 965mm x 1250mm x 460mm Stake thickness: 40mmDrive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm *Further technical data available on request. The RR500DHKAHR tracked dumper is the perfect solution for transporting materials such as wood, pipes or bulk goods, especially on rough terrain. Its compact design and track drive enable maximum maneuverability, even in areas that are difficult to access.