VERTICAL AIR TANK

SICC

Condition: new, Pasteurizer with tube heat exchanger Nominal capacity 2,000 l/h Dcedpfob Nt T Tex Acpen (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx. 180 kW Electrical rating 1.8 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Dimensions: Length 1,715 mm Width 900 mm Height 1,900 mm Weight (heating circuit drained) 500 kg Weight (heating circuit filled) 600 kg Heating oil consumption approx. 19 litres/h Max. exhaust temperature: 180°C Noise level (LW, A) 83 dB

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. Dodpfx Aexaxr Nocpscn 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set

Condition: used, Compressed air system with compressed air compressor and compressed air tank - KAESER SK26 screw compressor (built in 2005) - Gebre GmbH compressed air tank with a capacity of 750 litres (built in 1996), standing on 3 feet with pressure gauge. Additional title: air compressor with compressed air tank Delivery appr.: 2,2 m3/h Max. working overpressure compressor: 10 bar Gross volume compressed air tank: 750 l Max. working overpressure compressed air tank: 11 bar Power: 15 kW Current: 400 V Voltage: 35 A Dedpfew Tbtkox Acpjcn Frequency: 50 Hz Length: 0,8 m Width: 0,8 m Height: 1,03 m Weight: 290 kg Operation / Control: control panel on compressor Base construction: tank vertical on 3 feet Features: air compressor, compressed air tank

Condition: good (used), Year of construction: 1997, Stainless Steel Tank 500 Liters with SCABA Agitator and Measurement Technology Manufacturer: Food Tech Tank Type: Stainless steel tank with agitator Capacity: 500 l Year of manufacture: 1997 Quantity available: 2 units Agitator: SCABA Motor power: 0.37 kW Protection class: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Measurement technology: Endress+Hauser Liquiphant Supply voltage: 10–55 V DC Equipment and Accessories Agitator fully assembled Internal mixing system with agitator blades Manhole with cover Filling opening with grate insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated into support frame Discharge at the bottom with connection Dcjdpjyxvwpjfx Acpjn Pipe fittings and valves

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 575531, OKS Air receiver tank Serial: 575531 Dcedpfeqqhtusx Acpon 2012, 500L tank, 11Bar

Condition: new, Year of construction: 2027, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Dcsdpfx Ajvv H Hdjcpen Contact us for more information and quotations

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Dsdpexc Rmqjfx Acpscn Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 380 h, power: 27 kW (36.71 HP), fuel type: diesel, gearing type: mechanical, Equipment: hydraulics, lighting, trailer coupling, The tractor is in very good condition, practically new, with only 380 operating hours. Everything works, and all documents are in order. A snowplow attachment is included. It is located in Estonia, in the Ida-Viru County. Dedpszzaubofx Acpjcn

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg OSMOSIS PLANT * Dedpsu Nw Hlsfx Acpecn

Condition: used, Year of construction: 2022, machine/vehicle number: 15084, functionality: fully functional, cutting width (max.): 420 mm, empty load weight: 3,100 kg, cutting length (max.): 200 mm, saw blade length: 5,500 mm, motor model: IE3, Equipment: documentation/manual, SECOND-HAND TS 400 THIN CUTTING HORIZONTAL BANDSAW CE RULES TECHNICAL DATA: SPECIAL DEVICE "OFFSET": DEVICE "DOUBLE SPEED": Dodpfx Aoyam U Tocpocn - Max. cutting capacity 420x200 mm - Distance from blade to conveyor 2-150mm - Min. cutting thickness from the top 0.75 mm - Saw wheel diam. 800 mm. - Saw wheel thickness 50 mm - Sawblade length 5500 mm. - Sawblade width 50 mm. - Sawblade speed 17-34 m/s - Conveyor belt size 400x4200mm - Oil mist cooling system - High accuracy hydraulic blade tension system (2500 kg) - Variable feed speed 0-25 m/min - Feed motor 2HP with inverter - Main motor 30 HP with inverter - Blade lift motor 2 HP - Dust hood outlet diam. 125 mm x 2 - Machine net weight Kg. 3100 - Air loaded pressure roller - Slow cutting start function - Spraying jets for blade lubrication - Motor IE3 INCLUDED - S/N 15084 - Year 2022