Electric motor 4 kW 1435 rpm

Siemens Deckel 1LC3113-4BB23 Z FP4L

Condition: new, Year of construction: 2026, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. Nsdeh Sptnepfx Ag Ieku EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min Nkodpfx Aoqpl Uujg Isu spindle taper SK 40 total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Year: 2017 Some repairs have been carried out, and the following defects are known to us: Geometry checked. Njdpfxow I S Uus Ag Ioku Z-guides in the area of the main spindle (chuck) are 'slightly' worn. Tool turret checked and adjusted. X-axis belt renewed and machine zero point set. Z-guides in the area of the chuck are slightly worn. Automatic band lubrication oil leak – troubleshooting completed, problem resolved, lubrication oil line renewed. 100% operational. Loaded free of charge. Immediately available. Location: 8740 Zeltweg, Austria

Condition: good (used), Suhner Sumatic BEM 20 + Polydrill drilling unit Manufacturer: Suhner Model: Sumatic BEM 20 + Polydrill kW: 2,2 V: 380/220 ; 460/230 A: 5,7/9,8 ; 4,9/8,5 Hz : 50/60 rpm : 940 / 1150 Nedpjd Huvqjfx Ag Isku spindle adaptor : 13 mm 25-125 mm double spindle drill head

Year of construction: 1975, condition: good (used), Cover FP3L with.adjustable angle table , vertical milling head,SK 40 S20x2 spindle mount . Good working condition. After consultation under power ready for demonstration. Nkedpfeildwxox Ag Ieu

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table -Table surface: 600 x 220 mm -Y-axis: 130 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 45 mm -Total dimensions: 690/490/H300 mm -Weight: 72 kg Nkedpeqddi Ujfx Ag Ieu

Condition: good (used), Year of construction: 1975, Cover FP3L with.3-axis Heidenhain digital readout , rigid table , vertical milling head , SK 40 S20x2 spindle mount . Good working condition. Ready for demonstration under power by arrangement. Njdpfx Agouclbzs Ieku

Condition: good (used), Ball turning device, ball turning device, universal ball turning device -Manufacturer: Bilz, Universal ball turning device size 1 -Turning Ø: 0-80 mm -Dimensions: 440/260/H230 mm Nkjdpev Sqttefx Ag Ieu -Weight: 19.7 kg

Condition: new, Year of construction: 2026, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milliAutomatic X-axis feed designed for milling and drilling machines: ZX7032G, ZX7045, ZX7045 DRO, ZX7045B1, ZX7045B1 DRO, ZX7045 BXL, ZX7045 BXL DRO, ZX7055, ZX7055 DRO. Mechanical Table Feed for Milling Machines: A Tool for Precision Machining Our mechanical table feed is an essential accessory for workshops and professional machining facilities. With horizontal mounting, the unit ensures stability and precision during a wide range of milling operations. It is an ideal solution for both hobbyists and professional users, offering smooth speed adjustment and rapid feed, allowing flexible adaptation to different materials and machining tasks. Invest in our mechanical table feed and unlock new possibilities in precision material machining. For both craft enthusiasts and professionals, this is a tool that meets the highest expectations on every project. Manufacturer: Cormakg and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally. Rigid, sturdy cast iron Autofed spindle Milling machine height adjusted on the support, not on the column Additional flood coolant system Rigid cross table with precisely ground surface Dovetail-shaped guides Quiet work due to the ground gears Left/right rotation +/- 90° rotary head Adjustable head height Base available optionally Technical data Steel drilling efficiency 32 mm Cast iron drilling efficiency 45 mm Frontal mill diameter 80 mm Arbor mill diameter 28 mm Spindle speed 50–3024 rpm (6/12) Nodpfxeyct Aij Ag Ieku Arbor chuck MK4 Spindle feed 110 mm (automatic feed) Worktable dimensions 820 mm×240 mm Maximum distance from spindle to table 475 mm X-axis longitudinal travel 550 mm Y-axis transverse travel 170 mm Left/right rotary head 90° Motor power 1.3/1.8 kW Power supply 400V Weight 360 kg