Switchgear & control

Siemens SGT 600

Condition: reconditioned (used), Year of construction: 1995, RECONDITIONED natural gas turbine SIEMENS model SGT-600 Construction year - 1995. Dedpfx Asx Ncqwsfnsun Reconditioned in 2022. Please contact us for more details. Thank you!

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616 GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Dsdpfxowptfrj Afnsun Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: used, Year of construction: 1994, functionality: fully functional, Equipment: type plate available, For Sale: Complete CHP Plant We offer a complete Combined Heat and Power installation, consisting of: - Two Siemens SGT600 gas turbines (GT5 and GT6) - One steam turbine (ST6) - Generators, HRSG/boilers and auxiliary systems Capacity: - Total electrical output: 55–60 MW - Steam production: 110 t/h Condition and history: - GT5: recently fully overhauled and operational - GT6: high operating hours, suitable as backup or for life extension after overhaul Application: Duedpfxsx Aghkj Afnen Suitable for industrial steam and power production, with potential to supply surplus electricity to the grid.

Condition: used, Year of construction: 2008, For sale, we offer an MTU combined heat and power (CHP) plant with 1.2 MW electrical output. Technical details: Djdpfx Afjxcwlaensun Manufacturer: MTU Engine: MTU 12V4000L62 Generator: Stamford Year of manufacture: 2008 (completely overhauled in 2015) Operating hours: 63,000 Including control cabinets Including dry cooler

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas Dedou Nxatspfx Afnoun 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, intermediate storage tank + fuel depot tanks 4,8 m³ *

Condition: new, Year of construction: 2024, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Dsdpfx Afefu Ivzsneun Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: used, Year of construction: 2004, Cast epoxy resin - dry - 3 phase distribution transformer, manufacturer TESAR Italy, year of manufacture 2004, power 2500kVA, voltage ratio 20 (2x±2.5%)/0.4kV, AN-AF (forced ventilation, permanent overload 30%), Dyn11, uk=6%, IP00, standard losses, functional, complete documentation and rutine test report. Duodpfxowpb Ete Afnjn

Condition: used, Year of construction: 2007, Behringer HBM 540 A automatic band saw year of construction 2007 Working area flat 630x540 Round 540mm Motor power saw drive 11KW Cutting speed 20-200m/min Duodjwi Ii Sopfx Afnen 2x infeed roller conveyor driven 6200mm width 1200mm each with cross feed Discharge roller conveyor 5030mm driven chip conveyor The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals

Condition: used, Year of construction: 2005, operating hours: 196 h, functionality: fully functional, machine/vehicle number: 527102228, type of input current: three-phase, input voltage: 400 V, type of cooling: water, total width: 1,400 mm, total length: 4,400 mm, total height: 2,200 mm, fuel: diesel, overall weight: 17,800 kg, continuous power (apparent): 2,000 kVA, continuous power: 1,600 kW (2,175.39 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 76,000 cm³, input frequency: 50 Hz, For sale: 2000 KVA generator set including ADAM fan cooler Generator set dimensions (LxWxH): 4400 x 1400 x 2200 mm Djdpfx Afexcvfxsnsun Weight: approx. 17,800 kg Engine: MTU 16V4000 G21 Generator: New Age Stamford 2000 KVA generator set Engine and generator fully mounted on base frame Cooling system: Separate free-standing fan cooler as dual-circuit cooler (manufacturer: ADAM Kühlerbau) Fan cooler dimensions (LxWxH): 1400 x 2600 x 2560 mm (Dry) weight approx.: 1,650 kg If you have any further questions, please feel free to contact us.

Condition: used, Year of construction: 2002, operating hours: 69,000 h, functionality: limited functionality, power: 625 kW (849.76 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, input frequency: 50 Hz, load hours: 69,000 h, The engine with generator was removed from an existing container. Only the engine with generator and the corresponding control cabinet are for sale. All maintenance was regularly performed by Jenbacher service technicians, as we had a maintenance contract. The last major service was carried out at 50,000 operating hours, during which the turbine was also replaced. It is in good condition and stored in a warehouse. Duodpfxew Dn Sps Afnjn