Hot rolling machine

SKF EMB 200A

Condition: used, Year of construction: 1980, TUBE BENDING MACHINE LANG TYPE EL90 Φ 90 Ljdpfsrq D N Rjx Akqehf

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Ljdpfxsxwdygs Akqshf Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0540/98, functionality: fully functional, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Installation height: 700 mm. The table measures 1600 x 1300 mm Net weight: 45 tons. Gable opening: 1600 mm. Lhedpfx Aoicbbzokqef Exterior dimensions 2 x 3 x 6 meters. Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm Lhodpfep E Eglex Akqsf speed: approx. 25 m/min working direction: any work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Inquire by phone or email! Lsdpfx Aket Ucpbsqohf

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Lhodpfx Akorx Rxteqjf Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min Lhodpfx Asp E Ed Rjkqef working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Year of construction: 2007, condition: good (used), MAKE - LVD, Made in USA/BELGIUM MODEL - GLOBAL 20 1225 YEAR - 2007 CONTROL - FANUC 180I - PB CAPACITY - 20 Tons THROAT DEPTH - 1250.0 mm SHEET SIZE MAX. - 2500.0 x 1250.0 mm (1250.0 x 5000.0 mm) MAXIMUM WORK PIECE WEIGHT - 150 Kg MAXIMUM MATERIAL THICKNESS - 6.0 mm Lhedsiab Epopfx Akqof MAXIMUM TABLE SPEED - 0 – 4330.0 TURRET - 30 STATIONS, 4 AUTO-INDEXING MAXIMUM PUNCHING DIAMETER - 89.0 mm PUNCHING SPEED - 350 STROKES/MIN NIBBLING SPEED - 900 STROKES/MIN PRESS MOTOR POWER RATING - 460V 3 Phase Motor DIMENSIONS - 5560.0 x 5560.0 x 2400.0 mm WEIGHT - 16,000 Kg PLUS BRUSH TABLE VERY LOW HOURS GOOD RANGE OF TOOLING

Condition: used, Year of construction: 2008, control Siemens 840D Lhjdpfxowzypns Akqjf

Condition: used, functionality: fully functional, wheel width: 800 mm, module 1-6 diameter max 600mm Lhjdpfx Akoxhck Ssqef digital reading Complete machine with documentation, tool holders, change gears,...