Scissor lift

Skyjack SJ 4620

Condition: used, Year of construction: 2007, operating hours: 361 h, lifting height: 6,100 mm, Year of manufacture: 2007 Drive: Wheel Empty weight: 1.860 kg Working height: 810 cm Hfsdpfez I Agwsx An Non CE mark: yes General condition: average Technical condition: average Visual appearance: average Specification Details Manufacturer Skyjack Model SJ4620 (SJIII 4620) Year of Manufacture 2007 Machine Type Electric Scissor Lift Drive System 24V DC Electric Application Indoor use and level surfaces Certification CE Marked (European version) Performance Specification Details Maximum Working Height 8.10 m (26 ft 7 in) Maximum Platform Height 6.10 m (20 ft) Platform Capacity 590 kg (1,300 lb) Maximum Occupants 3 persons Gradeability 25% Travel Speed (Stowed) Approx. 2.9 km/h Travel Speed (Raised) Approx. 1.0 km/h Platform Specification Details Platform Length 2.13 m Platform Width 1.07 m Extension Deck Length 1.20 m Total Extended Platform Length Approx. 3.33 m Dimensions Specification Details Overall Length 2.31 m Overall Width 1.17 m Overall Height (Rails Up) 2.07 m Wheelbase Approx. 1.75 m Ground Clearance Approx. 0.10 m Weight Specification Details Machine Weight 1,860 kg Maximum Platform Load 590 kg Tires and Drive Specification Details Tire Type Solid Non-Marking Tires Tire Size 16 x 5 x 12 Drive Configuration 2-Wheel Drive Inside Turning Radius Approx. 0.71 m Outside Turning Radius Approx. 2.64 m Safety Features * Proportional controls * Emergency lowering system * Tilt alarm with drive cut-out * Pothole protection system * Automatic braking system * Overload protection * Dual holding valves on lift cylinders * Emergency stop controls at both platform and ground stations Electrical System Specification Details Power Supply 24V DC Battery Pack 4 × 6V Deep-Cycle Batteries (configuration may vary) Charger On-board Automatic Battery Charger Transport Information Specification Details Transport Length 2.31 m Transport Width 1.17 m Transport Height 2.07 m Transport Weight 1,860 kg = More information = Please contact Bas Sindorf , ) for more information

Year of construction: 1997, condition: excellent (used), A used, very well-maintained cold circular saw from EISELE, equipped with a 370mm circular saw blade, steplessly adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Hjdpfx Askfp D Tjn Nsfn Speed: 17/34 rpm Cutting range: Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100/100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865x1332x2175mm Weight: 460kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: used, Year of construction: 2012, lifting height: 2,070 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 1.922 kg Functional Lifting capacity: 590 kg Working height: 830 cm Dimensions of cargo space: 235 x 118 x 207 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Production country: CA Additional information Please contact Christian Theißen for more information Manufacturer: Skyjack Model: SJIII4620 Year of build: 2012 Condition: Used Data: Max. working height: 8,30 m Platform height: 6,30 m Lifting capacity: 590 kg Lifting capacity on extension: 590 kg Platform dimensions LxW: 2,15 x 1,12 m Platform lenght pushed out: 3,35 m Total dimensions LxW: 2,35 x 1,18 m Height transport position with railing: 2,07 m Height transport position without railing: 1,72 m Movable up to working height: 8,30 m Hodpfx Ansv Tknyj Nefn Ground clearance: 0,08 m Drive type: Battery Only indoor using: no Own weight: 1.922 kg Special features: white tires, anchorage points for restraint systems (PSA) available. Note: Newly processed Location: 41468 Neuss immediately available

Year of construction: 2021, condition: new, Fastech Horizontal Bandsaw, Fully Automatic, BMSO 350 GA Cutting capacity (round): 350 mm Cutting capacity (rectangular): 400 x 350 mm Cutting capacity (square): 350 x 350 mm +30° Round cutting range: 320 mm +30° Flat cutting range: 400 x 350 mm +30° Square cutting range: 350 mm +45° Round cutting range: 320 mm +45° Flat cutting range: 290 x 300 mm +45° Square cutting range: 290 x 290 mm Motor power, main drive: 2.2 kW Hydraulic pump power: 0.37 kW Coolant pump power: 0.12 kW Band speed, infinitely variable: 20-100 mm Saw band dimensions: 4160 x 34 x 1.1 mm Height of work surface: 760 mm Weight: 1050 kg Length: 2450 mm Depth: 920 mm Height: 2020 mm Roller conveyor, 1200 mm Infinitely variable band speed Hydraulic clamping device Hodpfsg Ekt Nox An Njfn High-performance gearbox Hydromechanical saw band tensioning Saw band brush Control

Condition: good (used), loading space length: 9,180 mm, loading space width: 1,620 mm, loading space height: 2,100 mm, color: yellow, Year of construction: 2007, General information Field of application: Construction Drivetrain Hedpszanb Uefx An Nofn Type of fuel: Electric Weights Empty weight: 2.530 kg Functional Lifting capacity: 200 kg Lift height: 2.300 cm Working height: 2.500 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Max. horizontal reach: 1140 m Max swing of arm in degrees: 90 Max swing of platform in degrees: 999 Latest inspection: 2026-05-31 Production country: DE Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. Hfsdpfjun R N Aox An Nsn 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: new, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 320 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. DURMA press brake AD-S 30320 Standard equipment Capacity (length X ton) 3050mm x 320t Installation height 630mm throat 450mm Stroke 365mm Y1, Y2, X - 3 axes Control unit - DT 15 CE Fiessler Akas manual light barrier Servo motor backgauge & linear guide & Manual crowning European style tool clamping system Sliding front arms Hydraulic block and valves in special design according to Hfedpfxet Dvl Ue An Non worldwide standard Electrical equipment according to worldwide standard Options: Delem 66T Motorized crowning Motorized X, R-axis backgauge X=650mm X and R Lower tool European M.460R.85 Top tool European P135.75.R08

Year of construction: 1979, condition: good (used), machine/vehicle number: 2001, disk of circular saw-Ø: 400 mm cutting area at 90° round: 95 x 240 mm cutting area in mitre at 45° round: 75 x 180 mm disk rotations: 10,5 u. 21 upm Hfjdpofnrw Sjfx An Nen engine: 380 V, 2,6/3,2 kW space needed: 1500 x 1100 x 2150 mm weight: 630 kg

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK S-200RH The CORMAK S-200RH metal cutting band saw is a modern semi-automatic band saw designed for intensive operation in the metalworking industry. It enables cutting at angles from -45° to +60°, providing high precision, repeatability, and efficiency even when processing heavy sections. The machine combines precise blade guidance with automation of key functions, including hydraulic arm lifting/lowering and hydraulic vice control. Main advantages of the machine Hydraulic arm movement control (up/down) with smooth adjustment of lowering speed. Arm position memory function – automatic return to a predefined height. Swivelling saw arm from -45° to +60° with a clear angle scale. Hydraulic quick-clamping vice – suitable for cutting profiles and solid materials. Heavy cast iron saw arm – ensures rigidity and operational stability. Efficient coolant pump with closed-loop cooling system. CE safety system – including limit switches and emergency stop button. Construction and technology The band saw is built on a stable steel base with an integrated hydraulic unit and coolant tank. The saw arm is made from a single-piece cast iron construction, providing high resistance to vibration and twisting, which directly improves cutting quality. The blade guides are equipped with carbide inserts and roller bearings, ensuring accurate alignment and straight cutting of processed materials. A high-performance ABB M3V series motor and worm gear transmission provide two cutting speeds for optimal adaptation to different materials. Precision and work efficiency The machine enables fast and repeatable cutting of pipes, profiles, and solid materials, including very small sections starting from Ø5 mm. Automation of the cutting process (arm movement and hydraulic vice operation) significantly reduces operating time and minimizes operator involvement. The integrated blade cleaning brush maintains proper working conditions and extends blade service life. Applications The CORMAK S-200RH model is designed for: production workshops, steel construction plants, machine manufacturing industries, maintenance departments. It is particularly suitable as a band saw for pipes and profiles in serial production and applications requiring high cutting accuracy and repeatability. Standard equipment Control console mounted on a separate pedestal Integrated hydraulic power unit Hydraulic vice Automatic arm lifting and lowering with position memory function Blade cleaning brush Coolant system with pump Bimetallic band saw blade Technical documentation (DTR) and CE declaration of conformity Optional equipment Material feeding rollers Laser cutting line guidance system Extended cutting length measurement system Semi-Automatic Metal Cutting Band Saw CORMAK S200RH Technical data Parameter Value Machine type Semi-automatic band saw Arm lifting and lowering Hydraulic, smooth adjustment Blade speed 36 / 70 m/min Angular cutting range -45° to +60° Vice Hydraulic Minimum cutting diameter Ø5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting blade dimensions 27 × 0.9 × 2910 mm Hfedpfxoi D D A Sj An Nsn Total motor power 2.1 kW Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 530 kg

Condition: new, Year of construction: 2026, CORMAK H300SA Automatic Band Saw The CORMAK H300SA automatic band saw is an advanced technological machine designed for professional cutting of solid materials, steel profiles, and pipes. Thanks to its robust construction, high-quality components, and fully automated cutting process, this model is an ideal solution for production plants, metalworking companies, and machining centers where repeatability, precision, and efficiency are essential. Main advantages of the machine Fully automatic operation – the complete cutting cycle is performed without operator intervention. Hydraulic vise and material feeding system – increased efficiency, accuracy, and safety during operation. Two-column band saw construction – provides high rigidity and precise blade guidance. Arm and vise position memory system – reduces cycle times and improves cutting repeatability. Cooling system and powered cleaning brush – extend band saw blade life and improve cutting quality. Machine construction and technology The saw body is made of cast iron mounted on a rigid frame structure. The frame is inclined at a 3° angle, improving the quality of cutting closed profiles. The blade guides, based on bearings and carbide inserts, ensure excellent stability and cutting precision. The hydraulic feeding unit enables accurate and smooth movement of workpieces up to 500 mm in a single feed stroke. Precision and work efficiency Hsdpfxjiz S Nyo An Nofn The H300SA model features hydraulic arm feed with stepless adjustment, allowing cutting parameters to be optimized for different materials. The cooling system and cleaning brush significantly reduce blade wear, improving productivity and minimizing downtime. The automatic operating cycle enables precise serial cutting with minimal operator involvement. Applications The CORMAK H300SA automatic band saw is an excellent solution for: production companies processing steel, cast iron, and non-ferrous metals, steel construction plants, steel distributors and logistics centers, companies specializing in pipe and profile prefabrication. Standard equipment Automatic operating mode Hydraulic vise and material feeding unit Arm and vise position memory system Powered blade cleaning brush Cooling system Bi-metal band saw blade CE declaration of conformity Operating manual and technical documentation (DTR) Technical specifications – CORMAK H300SA Automatic Band Saw Parameter Value Cutting capacity Ø 300 mm / 300 × 300 mm Bundle cutting capacity Max. 260 × 90 mm Blade dimensions 3505 × 27 × 0.9 mm Blade speeds 40 / 60 / 80 m/min Arm feed Hydraulic, stepless adjustment Main motor power 3.8 kW Hydraulic unit motor power 0.75 kW Coolant pump motor power 0.09 kW Feeding stroke 500 mm Load capacity 1500 kg Machine dimensions (L × W × H) 1750 × 1950 × 1550 mm Weight 1200 kg