Conveyor belt, L: 6,100 mm

SPÄTH 1000003874, FB: 600 mm

Year of construction: 2025, condition: as good as new (ex-display), Our mobile winder, is one of our demonstration machines, condition good, slight scratches on the housing and on the chassis, Warranty 12 months, completely checked and serviced. On request with optional accessories such as a wide feeler strap. Warranty: 12 months (single-shift operation), The advantages at a glance: - Working area of only 750 mm around the pallet - Extremely compact design - Patented steering system - Compared to its competitors, it takes up to 40% less space - Easiest handling - German support - Upgrades are also optionally available later The LEO only needs 75cm (about a shoulder width) around the pallet to be wrapped. WORKSPACE Pallet size: Height: min. 500 mm / max. 2,000 mm Length: min. 600 mm / without limit Width: min. 600 mm / without limit Machine dimension: Height: 1,950 mm Length: 980 mm Width: 700 mm Pallet weight: min. 50 kg (optionally also lower possible) FILM DATA Wrapping programs: - Foot and head wrapping - Cross and one-way winding - with stop for cover sheet support Film width max. 500 mm Core diameter max. 76 mm Outside diameter max. 220 mm MACHINE DATA Tension: - Battery: 2x 12 volts - Charger integrated 220 volts - Drive: 2x 24 volts - Foil slide: 1x 24 volts Foil carriage: - own parameters for up and down movement - Mechanical film brake - stepless adjustment Control: - Touch panel with digital display - Speed dial buttons Gcjdpfxshfc Rie Aftsa - Drawbar with navigation buttons - Pallet detection via tactile belt - Emergency switch - 6 storable working modes - Double collision protection Mast: Stationary construction Weight: 195 kg CE marked machine the wrapping of black products or the use of black stretch film. and can be charged with any cable with a Euro mains plug at a 230V household socket. Such a charging cable is of course part of the scope of delivery.

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor Gcedpfjxftvasx Aftoa -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately

Condition: like new (used), Belt Conveyor – As New • Condition: as new, only a few operating hours • Belt width: [e.g. 400 mm] • Total length: [e.g. 3,000 mm] • Drive: [e.g. electric motor, 230 V / 400 V] • Speed: [optional: adjustable/fixed] • Frame: [e.g. aluminium profile / stainless steel / painted steel] • Accessories: [e.g. side guides, height-adjustable, etc.] Delivery time: by arrangement / available immediately Payment terms: to be agreed Gsdpfx Asw Nrmtsfteca For sale: 4 roller conveyors – robust and height adjustable We offer a total of four roller conveyors in good condition for sale. Ideal for use in warehouses, workshops, or production areas. Technical data: • Length: approx. 2.00 m or 2.10 m • Outer width: 57 cm or 89 cm • Inner width (roller width): 50 cm or 76 cm • Height adjustable: up to max. 70 cm The conveyors are stable, versatile, and can be flexibly adapted. Price on request / negotiable Available individually or as a package. If you are interested or have any questions, we look forward to hearing from you!

Condition: used, Year of construction: 2008, Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Gcodpoq I Ty Rofx Aftea Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2025, functionality: fully functional, Successful Project Completed – Palletizing System with Wrapper for Parquet Production Godpjwmxg Asfx Aftjca We recently planned, delivered, and commissioned a complete palletizing system including stretch wrapper for one of our customers in the wood processing industry. The system enables fully automated, safe, and efficient palletizing, from stacking to transport-safe packaging with stretch film. Your advantages with us: Customized solutions for your products and processes Robust, proven technology with state-of-the-art control systems Everything from a single source: planning, delivery, installation, and commissioning Are you planning a new packaging solution? Contact us; we will develop the right automation solution for your production!

Condition: used, functionality: fully functional, conveyor belt length: 2,470 mm, conveyor belt width: 400 mm, total length: 2,480 mm, total width: 630 mm, total height: 990 mm, power: 0.09 kW (0.12 HP), TAF item number: 1000003856 Manufacturer: trio-technik Year of manufacture: unknown Overall dimensions: 2,480 x 630 x 990 mm (LxWxH) Width incl. side panel: 480 mm Side panel height: 60 mm Width incl. drive: 550 mm Conveyor length: 2,470 mm Conveyor width: 400 mm Belt type: PVC, smooth Belt width: 400 mm Substructure: incl. supports, H: 490 to 990 mm Drive: head drive Motor: gear motor Gjdor D Nxnspfx Aftsca Motor data: 0.09 kW, 50-60 Hz, 380-415 / 440-485 volts Conveyor speed: 0.01-0.02 m/s, constant Special features: Includes ON/OFF switch Includes side guide H: 60 mm Includes CEE plug Condition: Used / fully functional Function test: OK

Condition: used, Year of construction: 2001, Lippert belt conveyor inclined belt GF 7000-650-500 RA1480 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7000 mm (upper straight 1000mm + arch 500mm + inclined belt 5500mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Gcodjk Abckspfx Aftoa support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2009, functionality: fully functional, conveyor belt length: 18,000 mm, conveyor belt width: 700 mm, total length: 18,000 mm, total width: 870 mm, motor manufacturer: SEW, Belt conveyor/ conveyor belt/ belt conveyor 18000x870 approx. 18 meters Manufacturer: Costo Year of construction: 2009 Model: Belt Condition: Used Total length: approx. 18000 mm Total width incl. motor: approx. 870 mm Overall width without motor: approx. 790 mm Belt width: approx. 700 mm Belt type: Smooth Frame made of steel Frame height: approx. 105 mm Color: Dark grey System consists of 8 segments 7 segments: approx. 2250 mm 1 segment: approx. 2330 mm Feet to be ordered separately Including SEW motor The conveyor technology has run until dismantling. Condition: fully functional, with signs of use Ideal for fast material transport Expertly dismantled and packed Gcjdpfetcug Ajx Aftja Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We will be happy to provide you with an individual quotation or advise you on the design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of sectors, such as logistics, the pharmaceutical industry Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting technology or supplementary components such as order picking racks or containers.

Condition: used, Year of construction: 2014, Transnorm conveyor belt GF 4800-700-600 RA2203 Gcodpfeq I Ty Ajx Aftja Technical data: Conveyor length (NL): 4800 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch belt conveyor GF 5140-600-500 RA2082 Technical data: Conveyor length (NL): 5140 mm (4640 mm incline + 500 mm arch) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): please contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Gsdpon Tpvkofx Aftjca Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics