Mower

Stihl Stihl MS 500i

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Ledpfx Akowp Rqfsqshf Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: new, Year of construction: 2026, This machine is a powerful, precise and universal device in a compact body, created for all workshops, furniture manufacturers and carpenters looking for a powerful machine. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Precise saw cutting and height adjustment through a knob Parallel guide with microadjustment Table ground, made of cast iron with expansion capability Stable, uniform table saw design, intended for any carpentry work Integrated side table provides great cutting capabilities Technical data Maximum saw diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 50 mm 90º maximum cutting depth 80 mm Worktable dimensions 350×800 mm Movable table dimensions 240×1320 mm S1 continuous work motor power 2.2 kW Power supply 400V Weight 180 kg Dimensions 1550×1900×820 mm Ljdpfx Aksvxhlgoqehf

Condition: used, Year of construction: 1966, Swivelling spindle: No Height adjustment: Handwheel Swivel adjustment: - Cutter jaw adjustment: manual Height display: Scale Swivel angle display: - Fence indicator: Scale Spindle diameter: 30 mm Speeds: 2800, 4500, 6000, 5600, 8000, 12000 rpm Motor power: 4 / 5.5 kW Motor brake: Manual Lhsdpjxu Dhlofx Akqof Extraction connection: 2 x 120 mm Machine length: 2000 mm Machine depth: 900 mm Weight: 700 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x1000x1900 mm Weight 300 kg Ljdpfx Aksvz Hq Hjqshf Total power requirement 1,2 kw

Condition: new, functionality: fully functional, New machine - stock clearance sale - Tipping is mechanical. The stated price is net ex warehouse location. Ledpfx Akow Sfdwjqehf

Condition: like new (used), functionality: fully functional, For sale is an M18 Milwaukee demonstration set with full warranty. The Power SET consists of: Cordless percussion drill driver M18 FPD3-0X Cordless compact impact wrench 1/2" M18 FIW2F12-0X Cordless angle grinder M18 FSAG125X-0X Ljdpswzlwkofx Akqehf Cordless circular saw M18 FCS552-0 Cordless reciprocating saw M18 FSZ-0 LED cordless hand lamp M18 TLED-0

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Lhsdpfxjwm Ih As Akqef Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Year of construction: 2007, condition: good (used), 930 USED Shop, confectionery, shelf, electric oven. Ljdpfx Aksu Ra A Ejqehf TECHNICAL DATA - number of baking chambers: 4, - each chamber is equipped with a steam option, - equipped with: proofer, hood. EXTERNAL DIMENSIONS (in cm): - W: 98, - H: 221, - L: 98 (with hood: 120). CHAMBER DIMENSIONS (in cm.) - W: 60, - L 48 - H: 14. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, Precise, quiet and reliable drill press. Built to strict accident prevention standards. Precision spindle axis with tempered morse taper, base plate machined. Electronic speed variator included. Lhodpfsir Aihjx Akqof Rotary table + vise mm 350 X 250. Drilling capacity on steel :R50 mm ø 22. Tapping capacity on steel :R50 mm M 14. Spindle taper :CM2 Spindle stroke :mm 90. Spindle sleeve diameter :mm 52. Column diameter :mm 98. Spindle center column distance :mm 201. Transmission PU Electronic variable speed drive (E). Spindle speed :Rpm 270 ÷ 4,200. Motor power :kW 0.75 / 220 V Single phase. Dimensions :( h x w x d ) mm 1950 x 600 x 680. Weight :Kg 220.

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 56 l, color: yellow, operation weight: 2,675 kg, maximum load weight: 1,310 kg, lifting height: 2,520 mm, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.45 m³, Year of construction: 2025, operating hours: 3 h, Equipment: all wheel drive, cabin, hydraulics, === MAIN SPECIFICATIONS === Year of manufacture: November 2025 Operating hours: 3 h (transport and test hours only) Operating weight: 2,675 kg Max. tipping load: 2,270 kg Bucket capacity: 0.45 m³ Transmission: Hydrostatic Drive: Permanent four-wheel drive Differential lock: Yes Quick coupler: Hydraulic Cabin: Fully enclosed Cab heater: Yes Tyres: Pneumatic, suitable for rough terrain Engine manufacturer: Yanmar Lhsdjymxxwopfx Akqsf Engine power: 18.5 kW Emission class: Stage V Hydraulic output: 39 l/min CE certified: Yes === ADVANTAGES === Brand new machine German manufacturing Only transport/test hours CE certificate and full documentation included Ready for immediate transport and operation === CONDITION === As new condition – unused machine with only transport and test hours. No wear and tear, no previous owner. Fully inspected and immediately available. === LOCATION & PRICE === Location: Sittard, Netherlands. Worldwide delivery possible. Price on request (EXW / excl. VAT). New Kramer 5045 wheel loader, manufactured in 11/2025 and fitted with only a few test hours. This compact yet powerful machine combines excellent manoeuvrability with a tipping load of 2,270 kg and a bucket capacity of 0.45 m³. Equipped with hydrostatic drive, hydraulic quick coupler, and a fully enclosed heated cabin – ideal for construction sites, landscaping, and urban projects with limited space. Fully CE certified and available from stock for immediate delivery. === DELIVERY === Crane loading possible upon request. Flexible worldwide transport options available. Transport is handled professionally by Collé Rental & Sales.