Terminal Tractor

Terberg RT223

Condition: used, mileage: 117,924 km, power: 185 kW (251.53 HP), first registration: 06/2020, fuel type: diesel, empty load weight: 11,770 kg, overall weight: 18,000 kg, tire size: 315/60 R 22.5, axle configuration: 4x4, color: white, gearing type: automatic, suspension: steel-air, total length: 5,550 mm, operating hours: 15,133 h, Equipment: ABS, air conditioning, all wheel drive, cabin, sliding door, Interior trim, road approval, drum brake, steering axle, sprung front axle, sprung cab, central lubrication, reverse warning system, seat heating, radio/MP3, radio/CD, heated exterior mirrors, speed limiter, Volvo TAD871 VE 6-cylinder engine (Euromot 4), incl. engine brake. Transmission: ZF 6WG211 incl. torque converter lockup clutch (6 forward / 3 reverse gears). Steering axle: Kessler Type LT61PL 375 (ratio 9.53:1) with simplex wedge drum brakes and parabolic leaf suspension. Rear axle: Kessler Type D81PL478 (ratio 9.76:1) with drum brake, air suspension. Steering: fully hydrostatic orbitrol system with priority valve. Left-hand drive position with rotating seat function. Additional folding seat. Roof window. Integrated ballast in vehicle front. Additional connection for two-line brake system. 2 x Duomatic couplings. NATO jump-start socket (24 V). 7-pin trailer socket (ISO 1185) for trailer functions. ABS cable and socket (ISO 7638/4091): 1 x at rear crossmember, 1 x behind cab. 15-pin socket (DIN 12098): 1 x at rear crossmember, 1 x behind cab. Operating hours: 15,133 h. Cpsdpfxsx U Ruue Afnsu

Condition: excellent (used), functionality: fully functional, Swing over bed: 1290mm Swing over cross slide: 910mm Swing in gap (l:500mm): 1580mm Center distance: 6000mm Spindlebore: 155mm Spindle speed: 6-800rpm Spindle nose: ASA A2 11" Workpiece between centers: 20 tons Taper in tailstock: Mk6 Longd.feed: 0.045-5mm/r Crossfeed: 0.0220-1.5mm/r Thread metric: 0.5-56 Thread's modulus: 0.25-28 Threads whitworth: 1/2-84/ " Spindle motor: 30 hp Manufacturing year: 1971 Length: 9500mm Cpjdpswc Nzpofx Afnou Width: 2000mm Height: 1600mm Weight: 13400kg Sony DRO cross slide 3 pcs. Steady rests Face plate 4-jaw chuck Hardened guideways Power on topslide

Condition: used, mileage: 333,333 km, power: 180 kW (244.73 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 11,720 kg, overall weight: 18,000 kg, tire size: 315/60 R 22.5, axle configuration: 4x4, color: blue, gearing type: automatic, suspension: steel-air, total length: 5,750 mm, operating hours: 20,114 h, Equipment: ABS, air conditioning, all wheel drive, cabin, sliding door, Interior trim, street-legal, drum brake, steering axle, sprung front axle, sprung cab, reversing alarm, seat heating, radio/MP3, radio/CD, heated exterior mirrors, speed limiter, Mercedes OM936LA engine (Euromot 4), incl. engine brake, ZF 6WG211 transmission with torque converter lockup clutch (6 forward / 3 reverse gears), steering axle Kessler type LT61PL 375 (ratio 9.76:1) with simplex wedge-type drum brakes and parabolic leaf suspension, rear axle Kessler type D81PL478 (ratio 9.76:1) with drum brake, air-suspended, steering full-hydrostatic orbitrol system with priority valve, left-hand drive position with swivel seat function, roof window, integrated ballast in vehicle front, additional connection for 2-line brake system, 2 x Duomatic connection, NATO jump-start socket (24 V), ABS cable and socket (ISO 7638/4091) 1 x at end carrier, 1 x behind cab, 15-pin socket (DIN 12098) 1 x at end carrier, 1 x behind cab, operating hours: 20,114 h, mileage estimated!! Cedpfxex U Ruhj Afnjpu

Condition: used, mileage: 122,454 km, power: 185 kW (251.53 HP), first registration: 06/2020, fuel type: diesel, empty load weight: 11,770 kg, overall weight: 18,000 kg, tire size: 315/60 R 22.5, axle configuration: 4x4, color: white, gearing type: automatic, suspension: steel-air, total length: 5,550 mm, operating hours: 16,042 h, Equipment: ABS, air conditioning, all wheel drive, cabin, sliding door, Interior trim, road approval, drum brake, steering axle, suspended front axle, suspended cab, central lubrication, reverse warning system, seat heating, radio/MP3, radio/CD, heated exterior mirrors, speed limiter system, engine Volvo TAD871 VE 6-cylinder (Euromot 4), including engine brake, transmission ZF 6WG211 incl. torque converter lock-up clutch (6 forward/3 reverse), steering axle Kessler type LT61PL 375 (ratio 9.53:1) with simplex wedge drum brakes and parabolic leaf suspension, rear axle Kessler type D81PL478 (ratio 9.76:1) with drum brake, air-suspended, steering fully hydrostatic orbitrol system with priority valve, left-hand drive position with rotating seat function, roof window, integrated ballast in vehicle front, additional connection for 2-line brake system, 2 x Duomatic connection, NATO auxiliary start socket (24 V), 7-pin trailer socket (ISO 1185) for trailer functions, ABS cable and socket (ISO 7638/4091) 1 x at rear cross member, 1 x behind the cab, 15-pin socket (DIN 12098) 1 x at rear cross member, 1 x behind the cab, operating hours 16,042 h Cpsdpfx Afsx U Runjnsu

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. Cpsdpfx Aofg E Hpsfneu • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, Year of construction: 2013, operating hours: 28,529 h, fuel type: diesel, motor manufacturer: Mercedes, Production country: NL Cpsdpfx Aex Dmuysfnou Please contact Theo Lelie for more information

Condition: used, mileage: 128,636 km, power: 185 kW (251.53 HP), first registration: 06/2021, fuel type: diesel, empty load weight: 11,800 kg, overall weight: 18,000 kg, tire size: 315/60 R 22.5, axle configuration: 4x4, color: blue, gearing type: automatic, suspension: steel-air, total length: 5,500 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, sliding door, Interior paneling, road approval, drum brake, steering axle, suspended front axle, suspended cab, central lubrication, reversing alarm, seat heating, radio/MP3, radio/CD, heated exterior mirrors, speed limiter system, trailer coupling preparation, engine Volvo TAD881 VE 6-cylinder including engine brake, transmission ZF 6WG211 incl. torque converter lock-up clutch (6 forward / 3 reverse), steering axle Kessler type LT61PL375 (ratio 9.53:1) with simplex wedge drum brakes and parabolic leaf suspension, rear axle Kessler type D81PL478 (ratio 9.76:1) with drum brake, air-suspended, steering full hydrostatic orbital steering system with priority valve, left-hand drive position with rotating seat function, roof window, integrated ballast in vehicle front, additional connection for 2-line brake system, 2 x Duomatic coupling, NATO jump-start socket (24 V), 7-pin trailer socket ISO 1185, ABS cable and socket (ISO 7638/4091) 1x at rear crossmember, 1x behind the cab, 15-pin socket (DIN 12098) 1x at rear crossmember, 1x behind the cab. Operating hours: 11,571 h Codpfxexz Dpce Afnopu

Condition: new, prebending: 6,0sheet length: 3100sheet thickness: 8,0total power requirements: 11,0weight approx.: 6,7messurements (LxWxH): 4,88x1,16x1,18 Cpodpfxed Ab H Hj Afnju

Condition: used, Year of construction: 2013, operating hours: 22,407 h, power: 175 kW (237.93 HP), motor manufacturer: Mercedes, gearing type: automatic, Machine type: RoRo terminal tractor Cpsdpfx Asv D Ekkjfneu Please contact Theo Lelie for more information

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min sawing motor 7,5 kW Cpjdpfx Asd Izmaofnsu diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.