Water spray system / sprinkler system

TOTAL WALTHER Typ: MZ382100; Anerk.-Nr.: G4860030.

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz Lhedpfx Asfqpxiegrep - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm Lsdslu D Tfepfx Agrohp 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable Lhsdpfxechhfue Agrjp cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: excellent (used), Several 150 m³ steel storage tanks (extinguishing water tanks) located underground Lodpfx Ajfnh Tgsgrehp Volume: 150,000 litres diameter: approx. 3.000 mm length: approx. 22.500 mm Weight: approx. 28,000 kg The tanks are converted to underground extinguishing water tanks according to DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bitumen exterior coating by us at the factory. - if required, we can provide the tank with a full bitumen-based interior coating (against corrosion) or epoxy resin interior coating A cost-effective delivery with our own truck is possible. Simply inform us of the delivery location, you will then immediately receive the exact freight costs. An inspection is possible at any time by prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth (a) barth-tank. de

Condition: used, Year of construction: 2004, Compact semi-automatic finger jointing line consisting of: - PJ 150/500 milling machine - Transfer table for manual transfer - PJ 7/6100 li single-channel press milling machine: 2 packages / min Press: 2 beats / min Input length: 150 – 700 mm Lsdpfjw Nbacsx Agrehp Final length: max. 6,100 mm

Condition: new, power: 235.36 kW (320.00 HP), overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, gearing type: automatic, Year of construction: 2024, water tank capacity: 5,000 l, Equipment: additional headlights, air conditioning, all wheel drive, cruise control, differential lock, parking heater, power assisted steering, All-wheel drive Tank Firefighting Vehicle TLF 3000 MAN 13.290 4x4, differential lock Single off-road tires Crew – squad Original MAN double cabin Air conditioning Cabin & pump compartment auxiliary heating Superstructure Lhjdpfx Agow D Akyorjp Water tank: 4,000 liters Foam tank: 4,000 liters Pump: 2,000 L/min at 10 bar, 400 L/min at 40 bar Electrically operated quick-attack hose reel, 60 m Water/foam monitor Self-protection system – tire extinguishing nozzles – for cooling and protecting the tires (the extinguishing nozzles can also be used for fighting embankment fires). Power AIR Box trickle charger Light mast Rear-view camera All-round LED lighting SCBA holders in the crew compartment Three equipment compartments each (left and right) One pump compartment (rear) Generous storage space Securing points for safe load attachment Manufactured from stainless, corrosion-free materials Frame construction Stainless steel brackets Special signaling system LED blue light system All lighting units protected against mechanical damage. LED lighting: - Scene lighting - Equipment compartment lighting - Pump compartment lighting - Cabin lighting - Roof lighting - Auxiliary headlights - Rear warning system - Pneumatic LED light mast with remote control We are happy to discuss further equipment options for your vehicle. Our specialists are available for the implementation of custom conversions. If you have any further questions, please do not hesitate to contact us. Additionally, we would be pleased to provide you with further information and detailed photos upon request. All information given to the best of our knowledge and belief, without guarantee for completeness and accuracy. This advertisement does not constitute an offer, but serves as information only. Subject to prior sale!

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field Lsdpfx Astrl R Ajgrehp - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Year of construction: 2017, condition: excellent (used), Steel structure - storage platform, 500kg/m2, floor area approx. 6,440 m2 - used - : Price ex site: only 405.000.- € (net), disassembled, packed and loaded. Manufacturer: Pro Man type: storage platform Year of manufacture: 2007 Ljdpohqm Rnjfx Agrshp Max. Platform load: 500kg/m2 Floor height (top edge of flooring): 3,462mm Lower edge of girder: 3.230mm Floor area: approx. 92.000 x 70.000mm stage flooring partly chipboard (38mm), partly gratings Accessories: stairs, railings, pallet transfer places, lower edge of chipboard: white Plan of the stage gladly as PDF on request Condition: very good Available: from approx. March 2022 Location: CZ

Condition: excellent (used), Wood finger jointing line Grecon Profijoint Grecon Profijoint Material length at infeed: 150-700 mm Material width: 40-150 mm Wood thickness: 18-50 mm Lhjdpfx Asw Ilryjgrjp Single-end tenoning machine Possibility of line milling Milling spindle power: 15 kW Power of the chipping/scoring spindle: 11 kW CE certificate

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Ledpfxswykcce Agrjhp