Wind turbine

Voith RWW11 E5 Windrive planetary gear

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, lifting height: 14,000 mm, overall weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled 14 meter crawler articulated work platform for 200kg and 120kg with electronic scales for sale! only 78cm clearance width and 1.95m clearance height! 2-man basket with 1.4m width, can be removed from the ladder with 2 bolts! Power and compressed air connection is available in the basket and can be used Can be operated almost silently with petrol or 230V power (so work is also possible at weekends) all functions (driving, supporting, lifting etc.) can be done with electricity as well as petrol! Good condition, white non-marking crawlers, every service carried out! functional and ready for use! (currently TÜV expired) Nlsdpfx Akjvmbzqeqea a current TÜV inspection can also be issued on request. If you have any questions, just call or send an email

Year of construction: 2019, condition: ready for operation (used), A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package and other spare parts. Documentation available. On-site inspection is possible. Nlodpfx Aksua E Treqoa

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10014777, overall weight: 1,300 kg, load capacity: 210 kg, arm reach: 2,696 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet and the associated cables. The robots come from a functioning system and have been professionally dismantled. We carry out a functional test and check the robots. If you are interested, we offer the opportunity to demonstrate the functions to ensure that they meet your requirements. Nljdpfxoq Suwbe Akqja - Supplement at additional cost - We are pleased to be able to offer you a new function for our robots: The Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency stop function, a safety gate and a start-stop connection via the Profisafebus. The controller is fully configured and programmed so that you can implement a simple stand-alone solution with a robot and a safety fence. If required, we can also offer you additional support during commissioning. We grant a 14-day right of return. Further warranty services are excluded. We have an extensive stock of these robots and the prices quoted are package prices. Discounts are negotiable for larger order quantities. We invite you to contact us again to discuss further details. Sale exclusively to traders.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 12786 040, overall weight: 20,000 kg, rotor diameter: 640 mm, total length: 4,900 mm, total height: 2,600 mm, total width: 4,100 mm, rotor width: 2,000 mm, power: 203 kW (276.00 HP), rotational speed (max.): 340 rpm, input current: 415 A, Equipment: rotational speed infinitely variable, The Vecoplan VAZ 2000 M F-T is a powerful single-shaft shredder. This robust shredder offers an efficient and reliable solution for a wide range of applications. Possible applications: - Household waste - plastics - paper With its proven technology and high throughput of 4-5 tons per hour, the VAZ 2000 M F-T is the perfect choice for shredding and volume reduction in disposal and recycling processes. The pictures are examples. The pictures do not show the machine as it is offered, they only serve as an example of what the machine will look like after the overhaul. Price on request. Nlsdourkc Rspfx Akqea

Year of construction: 2000, condition: excellent (used), Span approx. 20,0 m Lifting height approx. 8,0 m Nodpsqfc Egjfx Akqsla Make/reconstruction HILGERS/TEICHMANN Modification/New construction 2000/2021 Crane equipped with: - Double-rail trolley with 4-corner rope outlet - Magnet System prepared - Radio remote control - Optionally with magnetic traverse or spreader

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Njdjwp Rqfjpfx Akqela Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: good (used), functionality: fully functional, Equipment: type plate available, 100,000 liter tank, used, double-walled, good condition, ready for immediate use, cleaned - certificate from specialist company available Length: 15.74 m Diameter: 2.90 m Height: 3.10 m - Transport height Nljdeuzvyuspfx Akqea - Access ladder - Platform with railing - Firmly welded saddle feet - Ventilation - Limit value transmitter - Dipstick - leak detector Loading and transportation can be offered. Only serious and serious inquiries will be answered: Name, e-mail address and telephone number.

Condition: used, Year of construction: 2006, Technical details: turning diameter: 490 mm turning length: 2000 mm total power requirement: 15/20 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 2,8 x1,85 x 1,9 m In like new condition Heidenhain cycle control Torsion-resistant bed, made of high-quality cast iron with hardened, precision-ground guideways and a glass scale on the X-axis Safety clutch on the Z and X axes Sealing air with carbon filter in direct position measuring system High accuracy and rigidity of the lathe spindle thanks to precision spindle bearings, spindle bore Ø 93 mm standard, optional Ø up to 130 mm Solid tailstock, quill Ø 90 mm with internal taper MK5 Large overhang above the facing slide for easy accessibility during shaft machining. Nledpfswmcx Aox Akqea The machine has Teach-in CNC Programms. Control: MC420. Tool holder: SAUTER. *

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Machine workshop checked Nedpfx Aeu Hmacekqjla Machine cleaned and repainted

Condition: excellent (used), Year of construction: 2023, operating hours: 1,500 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Nlodpouu Upgefx Akqea Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.