Elevator

Wiese P20 Z-Form

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Fjdpjunia Hofx Aaropd

Year of construction: 1993, condition: ready for operation (used), Includes aggregate weigher, cement weigher, water weigher, additive weigher, special material weigher, Schlossermixer and Biotronik control system, documentation available, on-site inspection is possible. Fpodpsq Ttz Tjfx Aared

Condition: new, functionality: fully functional, color: other, Year of construction: 2025, Equipment: cabin, hydraulics, The BS-20 concrete block machine is a fully automatic block production facility equipped with modern production technologies and a hydraulic system. Thanks to its PLC-controlled structure, it produces with high precision without the need for operator intervention. Operating at a pressure of 100-160 bar, the system has the capacity to produce 20 interlocks and 8 20x40x20 blocks per press. Furthermore, it minimizes labor requirements thanks to a collection robot that automatically stacks and packages dried products. The BS-20 offers an environmentally friendly production approach with its A+ energy-efficient motor system, EFF3 class electric motors, and low energy consumption. It meets European quality standards with its ISO 9001:2008 quality management system, CE certificate, and DIN-TSEK compliant structure. It provides a user-friendly experience with its automatic/manual switching system that increases operational flexibility, remote fault detection via the internet, and forklift-compatible design. BS-20 Concrete Block Machine Technical Specifications Production Capacity: 100–110 pallets per hour Pallet Size: 1,000 x 920 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.2 m³ Hydraulic Oil Capacity: 400 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Product Height (max): 3,000 mm Product Length (max): 600 mm Machine Chassis: 10 mm Production in 8 Hours: 8,000 blocks / 18,000 interlocks Why Should You Choose the Constmach BS-20 Concrete Block Making Machine? The BS-20 Concrete Block Machine offers high efficiency, low operating costs, and long-lasting use for medium-sized businesses. Manufactured with the assurance of CONSTMACH engineering, this system delivers uninterrupted production performance thanks to its automation capabilities and robust construction. With spare parts warranty, fast service network, and 24/7 technical support, CONSTMACH ensures your investment operates reliably for many years. Therefore, by choosing the BS-20 model, you can maximize both your production quality and operational efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Fpjdpfx Aoxpi Tiearsd

Condition: excellent (used), Buhler Batch mixer Speedmix model AHLM 4000 In very good condition Fedpfewf Am Djx Aarspd

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Fpedpexlqntofx Aarsd Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Milling grooving unit K-100 (1 x Kw 1,8) 90° Hot Air Heater (to reactivate the color of plastic tape) Panels Return System "SAG" Mod. SPINNER 47 / 63

Condition: used, Year of construction: 2009, Kemper HK 200 RD bowl lift Fjdpfx Aeiy S Daearepd suitable for Kemper President 75-125-150 bowls max. 1000 kg lifting weight lifting height 294cm with President 75 bowl total height 410cm with President 75 bowl year of build 2009 safety cage pictures BEFORE reconditioning

Condition: good (used), Year of construction: 2001, Robot with aggregates, rotary table and housing Fjdpfx Aop E Db Tsarjpd Please contact us if you are interested !

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 Fedpfxstndpze Aaropd - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Year of construction: 2024, condition: new, For sale: drying system - 1T 184 TPR Model, (Mobile Conveyor Belt) We offer a high quality drying system, ideal for drying wood sawdust, produce, recyclable waste, food ingredients. Below we present the design details and features of the drying system: Design data: - Product handled: sawdust - Physical appearance:Loose - ˃ 1 mm - Initial moisture content: 55%, 50%, 40% - Final moisture content: 12% - Wet production: 4,00 t/h, 4,50 t/h, 5,65 t/h - Dry production: 2,05 t/h, 2,55 t/h, 3,85 t/h - Drying air temperature: 80 °C - Thermal energy consumed: 1.800 - 2.350 kWh - Max. evaporated water per hour: 1.800 - 1.955 Kg/h Installed electrical power: - Feeding cooker: 5,5 kW (x2) - Drying belt: 2,2 kW - Unloading equipment: 5,5 kW - Exhaust fans: 22,00 kW (x3) - Cleaning fans: 4 kW (x2) - Total installed power: Approx. 92.70 kW Water-to-air heat exchanger: - Recommended thermal capacity: 2.600 kW - Water temperature: 90 °C on - 70 °C off Dimensions: - External dimensions of dryer frame: Approx. 22 m long, 6 m wide - Drying belt surface: 72 m² - Unloading equipment: 5,500 mm x Ø 300 mm - Feeding trough: Approx. 1.00 m³ - Number of exhaust fans: 3 - Number of water-to-air heat exchangers: 4 Technical description: - Feeding system: Adjustable pulley conveyor with level sensor. - Drying table: Modular design with inspection windows. - Drying belt: Polyester fabric conveyor belt with steel rollers. - Thermal insulation: 50 mm thick rock wool with Magnelis® cladding. - Mixing brush: Painted steel mixing brush. - Base frame: Folded steel plates with reinforcing profiles. - Drying belt cleaning system: High pressure air and water spraying system. - Water spraying system: Closed circuit water spraying system. - Stairs and access: Secure access stairs and walkways. - Unloading equipment:Steel pulley unloader with motor. - Heat exchangers: High efficiency steel finned heat exchangers. - Air exhaust fan: Centrifugal fans with vibration damping connections. - Heat recovery: Hot air return duct. - Machine enclosure: Prefabricated enclosure made of insulated sandwich panels. - Dust filters: dust filters on the air intake grille. - Paint cycle: Phosphating, passivation, polyester powder coating. - Electrical control panel with PLC: SCHNEIDER electrical and PLC components, HMI control panel. - Humidity control system: PT 100 temperature sensors. - Remote service: direct connection via Internet. Fodpfsua D U Ijx Aarepd - Input and output humidity sensors: 4-20 mA adjustment. For further information and quotation please contact us! We look forward to your interest! Price: 530.000 Eur

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, We are offering for sale a HAAS SL-10 CNC lathe. This is a compact and robust 2-axis turning center, ideal for machining small to medium-diameter parts. This model is perfectly suited for automation via a bar feeder. General description: - Brand / Model: Haas SL-10 CNC Lathe - Type: 2-axis CNC turning center - Control: Haas CNC - Design: Slant-bed construction for increased rigidity and optimal chip evacuation. Technical specifications: - Maximum turning diameter: approx. 279 mm - Maximum turning length: approx. 356 mm - Bar capacity: approx. 44 mm - Chuck: 6.5″ or 5C collets - Spindle speed: up to 6,000 rpm - Spindle power: 11 – 15 HP (8 – 11 kW) - Turret: 10 to 12 stations (depending on version) Fpsdpfx Aasydpw Ejred - Axes: X and Z Feel free to contact me for any further information or to arrange an inspection.