Scissor lift table

WTT Fördertechnik E 10.10.5.1.0.RB

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Hodoxlknmepfx Afuju Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm Hedpfx Asmghawefuju -Own weight: 2100 kg

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Hodpod Rg Dpjfx Afuou Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) Hsdsl Nbqcepfx Afusu platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: reconditioned (used), working length 3600 mm Working width 1140 mm Working height 820 bis 1050 mm WEINIG RF15 Return Conveyor System ----- Suitable for use after a chamfering, planing, and milling machine with a maximum feed speed of approximately 22 m/min. For the continuous return transport of workpieces to the operator. After passing through the planer, the workpieces are transferred to a roller conveyor, where they are conveyed transversely and then taken over by a driven roller conveyor. This conveyor directs the workpieces onto a downstream longitudinal roller conveyor back to the operator and also serves as a parts buffer. Manufacturer’s technical specifications: Workpiece length: 250–3,600 mm Hjdpfoxpn Tnex Afuju Workpiece width: 30–230 mm Min. workpiece thickness: 10 mm Max. feed rate of the planer: 22 m/min Cross conveyor with 2 integrated roller conveyors: Cross conveyor length: 1,140 mm Constant conveyor speed: 30 m/min Max. cycles per minute: 40 Roller conveyor length: 2,200 mm Constant speed: 30 / 60 m/min Gear motor: 1 kW (1.3 PS) Operating voltage: 220/380 volts, 50 hertz Compressed air connection: 6 bar Longitudinal roller conveyor (non-driven): Length: 1,700 mm Width: 160 mm Swing-mounted, adjustable incline Special equipment: Extension of the longitudinal roller conveyor (non-driven) by 3,000 mm ----- Price of the above machine available upon request! ----- (Technical data according to the manufacturer—subject to change without notice!)

Condition: new, Year of construction: 2024, Working width: 520 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2300 mm Dressing fence angle adjustable: yes Folding up the dressing tables: pneumatic Maximum passage thickness of thickness planer: 250 mm Thicknessing table height adjustment: electric with position control Hsdpfx Ajvadxlsfuju Planer thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Pull-out roller: Rubber Pressure bar: jointed Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Suction connection: 160mm Machine length: 2300 mm Machine width: 1100 mm weight: 980

Condition: used, Year of construction: 2017, table width 3000 mm table length 1500 mm burner heads 1 Plasma cutting system HEZINGER PlasmaLine EPJ / ECKERT with extraction system PFC-4 Plus 4kW F3800 Technical data HYPERTHERM Powermax 125 plasma cutting unit: Cutting capacity: Hodpfx Afsucpnleusu Recommended: 38mm Maximum: 44mm Separating cut: 57mm Piercing: 25mm Output current: 30-125A Mains connection: 400v-36A Compressed air requirement: 260l/min Air pressure 5.9bar Dimensions: 592 x 274 x 508 mm Weight: 49kg

Condition: excellent (used), Year of construction: 2004, total height: 1,060 mm, empty load weight: 4,300 kg, load capacity: 4,000 kg, overall weight: 4,300 kg, total length: 6,000 mm, total width: 3,000 mm, table width: 3,000 mm, table height: 1,063 mm, without hydraulic unit Hjdpoqagvzsfx Afueu

Condition: used, Year of construction: 1980, functionality: fully functional, Kohler straightening machine 30-400 - built in 1980 Hjdpev Hrltsfx Afuju Number of straightening rollers 9 Max. belt width 400 mm GSW decoiler AHM 1500 - built in 1999 Mounted together on a base frame Further data and pictures on request

Condition: new, Year of construction: 2025, functionality: fully functional, New lifter with CE certification 750kg wll (plate 3000x1500x20 steel) Works on battery Hsdpfx Afer Rgtijusu Delivered with charger Price is ex VAT 3945,- Vaculifter.nl