Electric 4-wheel forklift

Yale ERP35VL

Condition: used, functionality: fully functional, machine/vehicle number: HR34792, Year of construction: 2023, load capacity: 3,500 kg, lifting height: 6,565 mm, free lift: 2,358 mm, fuel type: electric, mast type: triplex, construction height: 2,995 mm, fork carriage width: 1,070 mm, fork length: 1,600 mm, empty load weight: 5,320 kg, total length: 3,570 mm, drive type: Elektro, construction width: 1,173 mm, Electric 4-wheel forklift Chassis number: HR34792 Ndedps Adwy Djfx Amtec Load center: 500 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Like new Technical condition: New Front tire type: Superelastic Front tire size: 23x10-12 Front tire condition: New Rear tire type: Superelastic Rear tire size: 18x7-8 Rear tire condition: New Battery voltage: 80V Battery capacity: 775Ah Battery type: PzS Battery year of manufacture: 2023 Battery condition: 80 - 100% Description: Machine completely workshop-tested, cleaned, and with new UVV and inspection certificates! Cabin installation possible! Side shifter, 3rd valve, 4th valve, rear work light, front work light, full free lift, CE certificate, non-marking tires, rotating beacon, LED, seat, - Accutouch mini-lever hydraulic controls - Panoramic mirror - Red seat belt with retention system - Yellow rotating beacon - Activation via ignition switch - 2 front and 1 rear LED work lights - Overpressure valve - 1 pair of external additional hydraulic lines (4th function) with quick coupling - Reverse warning signal with broadband tone - Blue Spot at the rear

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale is a Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model: DG 360. Year of manufacture: 2009. Steam output: 360 kg/h. Max steam pressure: 13 bar. Delivery available at extra cost. On-site inspection possible. Feel free to contact us with any questions. Njdpfx Ajydq Ewomtsdc

Condition: used, machine/vehicle number: 448P, Year of construction: 2016, operating hours: 1,741 h, load capacity: 3,500 kg, lifting height: 5,200 mm, overall weight: 3,670 kg, Hubhöhe: 5,20 m Tragkraft: 3.500 kg Leergewicht: 3.670 kg ohne Batterien Gesamtgewicht: 5.630 kg mit Batterien Antrieb über 80 Volt Elektromotor Automatik Radstand 1750 mm Reifengröße vorn 22x10-12, hinten 18x7-8 Profil 0-9 mm Gesamtmaße (L x B x H) 4200 x 1270 x 2400 mm Gabeln 1600 x 120 x 50 mm Nedpszca D Tofx Amtsdc Schutzdach Servolenkung Freihub Triplex Mast Seitenschieber Ladegerät, Kabine Nähere Daten und weitere Bilder gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten. Keine Gewähr auf alle Angaben

Condition: used, functionality: fully functional, machine/vehicle number: HR34433, Year of construction: 2022, operating hours: 4,093 h, load capacity: 3,500 kg, lifting height: 4,100 mm, free lift: 145 mm, fuel type: electric, mast type: duplex, construction height: 2,745 mm, fork length: 2,400 mm, empty load weight: 5,400 kg, total length: 2,570 mm, drive type: Elektro, construction width: 1,173 mm, Electric 4-wheel forklift Chassis number: HR34433 Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Front tires type: Superelastic Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tires condition: 60 - 80% Battery volts: 80V Battery Ah: 775Ah Battery type: PzS Battery year: 2022 Description: Additional equipment on request Sideshifter, fork positioner, Fork carriage with integrated sideshifter, 1070 mm - Class 3 3rd valve, 4th valve, rear work light, front work light, heating, full cab, CE certificate, interior mirror, LED, seat, Pedestrian warning light, LED lights mounted on the mast, Orange hi-vis seat belt with safety lock, Grammer seat, air-suspended, fabric, Speed limit preset at 10 km/h, Yellow beacon - activation via ignition lock, LED work lights, 2 front and 1 rear, with brake, tail and reversing lights, Panoramic mirror, Front and rear mudguard, Hose group for 4 functions (2 additional functions) Accutouch mini-lever hydraulic controls Ndedpfx Ajwqipcsmtec

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Nsdpfx Amsrz Irretedc Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: new, functionality: fully functional, machine/vehicle number: HR34791, Year of construction: 2023, load capacity: 3,500 kg, lifting height: 4,910 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, construction height: 2,295 mm, fork carriage width: 1,070 mm, fork length: 1,600 mm, empty load weight: 2,295 kg, total length: 2,570 mm, drive type: Elektro, construction width: 1,173 mm, Electric 4-wheel forklift Chassis number: HR34791 Load center: 500 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Njdpfeyn Tcgox Amtedc Mast type: Triplex Condition: New device Technical condition: New Front tires type: Superelastic Front tires size: 23x10-12 Front tires condition: New Rear tires type: Superelastic Rear tires size: 18x7-8 Rear tires condition: New Battery voltage: 80V Battery Ah: 775Ah Battery type: PzS Battery year of manufacture: 2023 Battery condition: New Description: 12 months factory warranty / Max. 2000 operating hours Side shift, 3rd valve, 4th valve, Rear working lights, front working lights, heating, full cabin, full free lift, CE certificate, non-marking tires, interior mirror, rotating beacon, LED, seat, LED lights mounted on the mast, pedestrian warning light, reversing warning signal with wideband tone, 1 pair of external additional hydraulic lines (4th function) with quick coupling, 2 front and 1 rear LED working lights

Condition: used, functionality: fully functional, machine/vehicle number: HR34439, Year of construction: 2022, operating hours: 10,026 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 145 mm, fuel type: electric, mast type: duplex, construction height: 2,745 mm, fork length: 1,600 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: HR34439 Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Front tires type: Superelastic Front tires condition: 60 - 80% Rear tires type: Superelastic Ndodpfx Amewqin Setsc Rear tires condition: 60 - 80% Battery volts: 80V Battery Ah: 775Ah Battery type: PzS Battery year: 2022 Description: Additional equipment on request Sideshifter, fork positioner, Fork carriage with integrated sideshifter, 1070 mm - Class 3 3rd valve, 4th valve, rear work light, front work light, heating, full cab, CE certificate, interior mirror, LED, seat, Pedestrian warning light, LED lights mounted on the mast, Orange hi-vis seat belt with safety lock, Grammer seat, air-suspended, fabric, Speed limit preset at 10 km/h, Yellow beacon - activation via ignition lock, LED work lights, 2 front and 1 rear, with brake, tail and reversing lights, Panoramic mirror, Hose group for 4 functions

Condition: used, Year of construction: 2012, Used machine Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting machining with wear plate Machining length 6250 mm (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, spindle head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, ball screw spindles Z-axis for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 - 20.6 Please refer to the corresponding data sheets. Machining dimensions: Max. workpiece size for edge machining X = 6250 mm Y = 2100 mm Max. travel distances X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height DYNESTIC table Z = 1st stage 318 mm / 2nd stage 418 mm from top edge of table (without tool, without chuck) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-Core processor Operating system Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transfer of control and program data. Data transfer takes place via high-speed internet connection Requirement: High-speed internet connection at the machine. DYNESTIC table Solid, continuous machining table with grid division, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop rails / stop Height 30 mm, pneumatically lowerable 2 stop rails in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Boring unit 7976, 24 spindles Drive power 3.0 kW 18 vertical spindles individually selectable Arrangement in L-shape, 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating right-hand / left-hand rotation n(max.) 1000 - 5710 min-1, steplessly adjustable Ndedjw I U Ecspfx Amtec Chuck: M 10 thread - clearance fit 11 mm without tool, without chuck 6 horizontal spindles 2 double boring spindles in X direction (32 mm distance between 1st and 2nd horizontal boring spindle) 1 double boring spindle in Y direction Chuck: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without chuck Free space 1 for: Optional double boring spindle in X direction or Vertical adapter with double feed force Free space 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 min-1, steplessly adjustable, two-stage feed stroke max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand

Condition: used, functionality: fully functional, machine/vehicle number: 34453, Year of construction: 2022, operating hours: 3,469 h, load capacity: 3,500 kg, lifting height: 5,210 mm, free lift: 1,750 mm, fuel type: electric, mast type: telescopic, construction height: 2,395 mm, fork length: 1,200 mm, empty load weight: 3,767 kg, total length: 3,570 mm, drive type: Elektro, construction width: 1,173 mm, Electric 4-wheel forklift Chassis number: 34453 Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: telescopic Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 80V Battery capacity: 775Ah Battery type: PzS Description: Machine is fully workshop-inspected, cleaned, freshly UVV and inspection approved! Side shifter. The machine is offered without the currently installed clamp fork. If needed, it can be purchased additionally. Nsdpfx Aeyn Tctsmtjdc 3rd valve, 4th valve, rear work lights, front work lights, road traffic permit (StVZO), full cabin, full free lift, CE certificate, non-marking tyres, interior mirror, rotating beacon, LED, seat, Lateral battery extraction / Accutouch Mini-levers / Blue-Spot rear and front / hazard warning lights / mast-mounted LED work lights / Grammer air-suspended fabric seat.

Condition: used, operating hours: 11,517 h, total height: 2,880 mm, total length: 10,000 mm, total width: 2,700 mm, Year of manufacture: 2014 Colour: White Empty weight: 6.000 kg - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Main motor power [kW]: 10 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes - └ Motor power [kW]: 3.6 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Safety mat, Enclosed fence - Vacuum pump present: Yes Ndsdpfx Ajx E Uk Ujmtjc - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - └ Oil free: Yes - CNC documentation available: USB stick - Table length [mm]: 5150 - Table width [mm]: 1600 - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Transport dimensions: 10000mm x 2700mm x 2880mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels