Storage platform

5x15m Lagerbühne , Belastung : 500kg/qm Unterkante: 3m ,ca. 75qm , Systembühne

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Blodpfshrkrtsx Agcsr Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners

Condition: ready for operation (used), Hsm V-Press 860 Baler, year of manufacture: 2005-2009, price: €5,600 Compression force: 54 kN Specific pressure: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening (W x H): 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Consumables: Wire Pressed material: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene Bjdpfx Aera Rbgegcelr Hsm V-Press 860 Plus Baler, year of manufacture: 2013-2015, price: €7,500 Hsm V-Press 860 L Baler, year of manufacture: 2015, price: €9,000 Hsm V-Press 860 Plus Baler, year of manufacture: 2019, price: €9,000 Hsm V-Press 860, ex-demo, year of manufacture: 2020, price: €13,000 Fourfold bale strapping with wire Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight (kg): approx. 500 kg Technical data: (L x W x H, mm): 1,213 x 1,824 x 2,987 Loading aperture (mm): 1,200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Hsm V-Press 860 Plus B Baler, year of manufacture: 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Filling method: Manual Dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Weight: 2,336 kg Consumable type: Wire Pressable materials: film, cardboard Idle cycle time: 25 s

Condition: excellent (used), functionality: fully functional, Technical data for the document shredding system: Manufacturer HSM GmbH + Co KG General data for the two-stage shredder system: Bljdpfx Agjwrybrscsr Type Duo Shredder 5750 Year of manufacture 2015 Operating hours 3,093 hours Throughput capacity up to 800 kg/hour, depending on material Rated power 30 kW Rated current 62 A Particle cutting size 6 x 40 - 53 mm Fuse protection 63 A gG/gL/C/K Weight of shredder approx. 2500 kg Data on the pre-shredder: Shredder type V 570 Working width of the cutting unit 500 mm Particle size 20 x 155 mm (w x l) Nominal power of pre-shredder 2 x 5.5 kW Nominal current of pre-shredder 2 x 11.5 A Data on the secondary shredder: Shredder type P 500.2 Working width of the cutting unit 500 mm Particle size 6 x 40 – 53 mm (w x l) Nominal power of secondary shredder 9.2 kW Nominal current of secondary shredder 18 A Security level according to DIN 66399 P-3, O-2, T-3, E-2 Baling press data: Type KP 100.1 Year of manufacture 2015 Operating hours 2,377 hours Pressing force 9 - 12 t Bale weight 40 – 150 kg/bale, depending on material Cycle time 7–16 seconds Feed chute dimensions 450 x 580 mm Bale size 630 x 500 x 400-1000 mm (w x h x l) Triple horizontal binding Press dimensions 3990 x 2225 x 1735 mm (l x w x h) Weight of press approx. 1000 kg Dimensions of entire system, conveyor belt, shredder and press: 9560 x 2071 x 3550 mm (l x w x h) Function description: This is a complete system consisting of a feed conveyor belt, a two-stage shredder and a horizontal baling pres. The material is fed onto the conveyor belt, shredded in two stages and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts for the system. Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: as good as new (ex-display), Year of construction: 2023, Performance: 150-180 kg/h Motor: 11 kW Voltage: 400 V Frequency: 50 Hz Weight: 1.5 t Bjdpfx Aokt Rcmsgcslr

Condition: reconditioned (used), MAREL + SCANVAEGT VÅGAR ID.NO. 1654 2x complete Multihead scales from Marel / Scanvaegt's associated platform, 14 bowls, conveyor belts, vibrator gutters, platform, distribution tools for packing in deep drawers, previously packed salami but suitable for many other things such as Vegetables, Cheese, Fish and more. Bsdjgfvbqepfx Agcjlr

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 4.16m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands 3420,- € (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 shelf stands, double-sided, approx. 4.16 m high, hot-dip galvanized IPE 160/100 each with 2x3 adjustable. Arms 1.20 m, 750kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 4160mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load center of 600 mm 750kg per arm / 2250kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Blsdpfxefivhfj Agcsr Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2008, condition: good (used), - OFFER 21078 - Bljdpfx Agogl Ap Necor Technical data: - Load capacity E.-chain hoist 250 kg - lifting speed approx. m/min - Operation of the chain hoist via manual remote button - Man. Procedure hoist / transverse travel + longitudinal travel - track width variable up to approx. 3000 mm - hook height approx. 2200 mm - crane track length approx. 4000 mm - headroom approx. 3500 mm - UK - crane girder approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 steel supports made of rectangular tube 150 x 100 mm H 3500 mm - 2 longitudinal trolley girders approx. 4250 mm - transverse trolley girder approx. 3000 mm - weight of the plant approx. 1000 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Bodpfx Asu Tha Ijgcjlr Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 4 pieces Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredders were an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machines are in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Bledpfxjxcngns Agcjr Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2017, operating hours: 1,700 h, functionality: fully functional, overall weight: 14,000 kg, type of input current: AC, input voltage: 230 V, ambient temperature (min.): -20 °C, ambient temperature (max.): 50 °C, usable tank capacity: 20,000 l, transport height: 2,600 mm, empty load weight: 4,435 kg, transport length: 8,400 mm, transport width: 2,400 mm, For sale: Compoman K 1812/20 Static Roll-on/Roll-off Compactor – robust and reliable waste management equipment! 📌 Technical Specifications: Brand / Manufacturer: Compoman – a renowned manufacturer of compactors and waste management solutions known for durability and high-quality craftsmanship. Model: K 1812/20 Type: Stationary roll-on/roll-off compactor, designed for loading, compacting and transporting municipal, industrial, and recyclable waste. Bjdpfx Aov Ermhjgcjlr Year of manufacture: 2017 First registration: 2018 – in use at a single site since then, fully operational. Working capacity: 20 m³ – allows collection of large waste volumes while maintaining compact dimensions. Payload capacity: 9,565 kg – enables cost-effective and efficient transport of large material volumes. Unladen weight: 4,435 kg – robust steel construction ensures stability and durability. Gross vehicle weight rating: 14,000 kg – compliant with transport regulations, suitable for operation with most standard hooklift vehicles. Hydraulic system: fully functional, regularly maintained, provides high compaction force. Loading system: compatible with standard hooklift trucks. Technical condition: very good – no major damage, mechanically sound and well-maintained visually. ✅ Advantages of purchase: - Ready for immediate use. - High compaction performance – saves time and costs. - Solid construction – designed for years of intensive operation. - Regularly serviced, used as intended. Ideal solution for waste management and recycling companies, production plants, logistics centers, or shopping malls. 💡 A great alternative to new equipment – attractive price, fast availability, and proven quality.