Suspension crane system with stand construction

STAHL 250 kg

Year of construction: 2008, condition: good (used), - OFFER 21077 - Technical data: Nwjdoglu R Hspfx Ab Djp - Load capacity E.-chain hoist 250 kg - lifting speed approx. m/min - Operation of the chain hoist via manual remote button - Man. Procedure hoist / transverse travel + longitudinal travel - track width variable up to approx. 3500 mm - hook height approx. 2800 mm - crane track length approx. 5000 mm - headroom approx. 3900 mm - UK crane girder approx. 3000 mm - 4 steel supports made of rectangular tube 150 x 100 mm H 3900 mm - 2 longitudinal trolley girders approx. 5000 mm - transverse trolley girder approx. 3500 mm - weight of the plant approx. 1000 kg

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, input current: 59 A, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, tank capacity: 300 l, Good day, We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Drive power 30 kW Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH Nsdpfxot H Rcae Ab Dewp

Condition: excellent (used), Chain hoists - DEMAG / STAHL - LIFTKET - 14 units: 1. Demag DKUN 10 - 2000 kg. 2. Demag PK 10 - 1000 kg. Nsdevv Idwspfx Ab Dewp 3. Demag DKUN 5 - 500 kg. 4. Demag D-BE - 160 kg. 5. Demag PK 2 F - 500 kg. 6. Demag PK 2 N-F - 250 kg. 7. Demag PK 1 N - 125 kg. 8. Demag DKUN 2 - 250 kg. 9. Demag PK 2 N - 500 kg. 10. Demag PKVUN 1 - 125 kg. 11. Demag PKUN 1 Motor - 125 / 250 kg. 12. Steel T 405 M - 1000 kg. 13. Steel T 302 S - 500 kg. 14. Liftket Star 021/51 - 500 kg.

Year of construction: 1991, condition: good (used), machine/vehicle number: RS100/9 + RS101-6, Technical data: 1 Zasche / Demag GSX250-3/3.25 pillar jib crane NL 250 KG Njdpfx Asvzkzpeb Dswp Payload at full reach 250 KG / 0.25 tonne payload Height: approx. 3.45m, UK boom: approx. 3.25m Reach: approx. 3m, hook height: approx. 2.85m Total weight approx. 500 kg including dowel plate 75x75cm with Demag chain hoist 250KG payload Connection to 400V 16A, swivel range 270° Test book is available Crane is dismantled and immediately available Item location is 75053 Gondelsheim Only the crane system shown in the pictures is for sale Used condition, see pictures Shipping by freight forwarder or collection by appointment

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, workpiece weight (max.): 800 kg, overall weight: 5,000 kg, total length: 5,000 mm, total width: 2,500 mm, total height: 2,200 mm, warranty duration: 12 months, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, working range: 3,000 mm, With the OR-S1530, Oree Laser offers a compact and easy-to-operate laser cutting system in large format. Nedpfxor D N Dzj Ab Dewp Our company, SF-Tech Engineering GmbH, is the Swiss representative of Oree Laser. All machines are newly imported and assembled according to customer requirements. We also provide training and service. In our showroom you can test the OR-S1530 including all accessories (high pressure compressor, suction system...). Technical data Working area: 3060mm X 1530mm External dimensions: L:4950, W:2300, H:2130 Weight: approx. 4'500kg Positioning accuracy: 0.03mm Max. Cutting speed: 115m/min Maximum acceleration: 0.8G Laser power: 6000 Watt Laser source: MAX Cutting head: Raytool or BOCI Fume extraction: Zone controlled fume extraction The side machine door can be easily raised or lowered at the touch of a button. The total height of the machine is 2200mm. The work table can be easily pulled out of the side of the machine by hand. This enables safe and fast loading and unloading of the machine. There are two new variants: 1st variant, a 60% extension table, without support on the floor, max. 800kg load. 2nd variant, a 120% extension table, with fold-out arms, max. 900 kg load. Do not hesitate to visit us in our showroom in 6281 Hochdorf.

Year of construction: 2012, condition: like new (used), machine/vehicle number: W111, Steel crane track suspension crane circular track 3x250Kg chain hoist crane Ideal for car washes, electroplating, etc Circle dimensions 6x2.3m (curved HEB140 beams) + Power rails / power supply + 2x 12m substructure HEA 180 + wall brackets Nwjdpfx Absi Ammyo Djp + 3x 250Kg chain hoists - electrically movable - trolley travel and lift (approx. 4m) Each chain hoist can be controlled independently of one another Crane is dismantled, packed and immediately available New condition Collection by appointment in 75053 Gondelsheim Forklift is available for loading Shipping by forwarding agency possible, please inquire with zip code

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Manufacturer: BLM Type: Tube Form M32x1.5 Year of manufacture: 2006 Nwjdpfsn Sm Ddjx Ab Djp Technical specifications Thrust force: 3.5 tons Locking force: 5 tons Working stroke: 130 mm Tool diameter: 80 mm Dimensions: 2400 x 1400 x 2000 mm Connected load: 12 kVA Weight: 2200 kg

Condition: used, Year of construction: 1996, spindle diameter 60 mm x-travel max. 1000 - min. 100 mm y-travel max. 1000 - min. 100 mm bore capacity in steel max. 40 mm thread capacity max. M24 Thickness max. 60 - min. 5 mm spindle turning speed - stepless einstellbar 1 - 1.000 U/min feed stepless einstellbar, Eilgang 1 - mm/min feed stepless einstellbar, Arbeitsgang mm/min feed power 16 KN tool taper SK 40 Njdpfsgvkkzex Ab Djwp spindle stroke 600 mm positioning speed in allen Achsen 1 - 10.00 mm/min positioning accuracy auf 300 mm = +/- 0,01 mm table load max. 500 kg work height max. 1000 mm weight of the machine ca. 4,8 t dimensions of the machine ca. 3,5 x 3,3 x 3,1 m Control Bosch CNC plate drilling system HMB PBM1000/60 - W12 for drilling head plates and Base plates in steel construction with tool changer (12x) Number of drilling spindles: 1 pc. Operating Voltage: 220/380V Frequency: 50 Hz Total connection value: 22 kVA

Condition: used, Year of construction: 2024, for ISO quick coupler Fork carriage 1,300 mm with 1,220 long forks ISO-SW / Warranty compl . Machine 2 years o. max. lOOOBh Caterpillar 906 - Wheel loader - / Basic machine 906-14A Tires 340/80 R18 Bibload M Deluxe - Cab DAB+ Radio / incl . Bl Nedpfxjrxtaho Ab Dswp

Year of construction: 2002, condition: good (used), AXIS COURSES X AXIS (longitudinal) (mm) 7,700 Y AXIS (transverse) (mm) 470 Z AXIS (vertical) (mm) 420 AXIS A (spindle rotation) 0°  180° ELECTROSPINDLE Maximum power in S1 (kW) 8 Maximum speed (rpm) 24,000 Tool attachment cone HSK - 63F Automatic tool holder coupling ● Cooling with heat exchanger ● Nsdpfxsruplde Ab Djwp AUTOMATIC TOOL MAGAZINE ON BOARD CARRIAGE Maximum number of tools magazine 8 Maximum number of angle heads that can be inserted into the tool magazine 2 Maximum blade diameter that can be inserted in the magazine (mm) Ø = 180 FUNCTIONS. Multipiece operation ● Dynamic pendulum operation ● MACHINABLE FACES With direct tool (top face, side faces) 3 With angle unit (side faces, heads) 2 + 2 With blade tool (top face, side faces and heads) 1 + 2 + 2 TAPPING CAPACITY With compensator M8 Rigid (optional) M10 WORKPIECE CLAMPING Standard number of vices 8 Maximum number of vices 12 Independent motorized vices ● Maximum number of vices per zone 6 2021/04/01 w