Used Chain hoists & lifting equipment for sale (344)

Year of construction: 2011, Condition: excellent (used), Capacity: 10000 kg Number of suction cups: 8 pieces Cgoln Ejd Ehctj H Hmjt Diameter of suction cups: 850 x 460 mm Suction power: 10000 kg/80% Total power: 2,2 kW Machine weight approx.: 1880 kg Dimension machine Lxwxh approx.: 3, 5 x 1, 9 x 1, 9 m Load capacity per suction plate 1500kg at 80 = "% suction plates were replaced on the 06.2016 Device in Germany used until 10.2018

Condition: used, Overall dimensions: 1720 x 1100 x 1600 mm Cjlsi Arlhen E H Hmjgt Tank size: 1200 x 600 x 1400 mm Weight: 248 Kg Material: Acid resistant It is equipped with a connection suitable for filling and draining (ball valve), and a pneumatic (electric) valve serves to aerate the tank.

Condition: used, You are in possession of an old hoist or crane, trolley or similar? Are you planning to replace / dismantle your machine(s) or plant(s)? Do you want to get the highest possible profit from their sale? We offer buying, selling, brokering and dismantling of machines, hoists, gantry cranes, industrial equipment and engines of various manufacturers all over GERMANY. Since we also operate throughout Europe and our clientele is very large and diverse, it is possible for us to broker even very special machines and pay the best possible and fair price. Please contact us. Gladly also via WhatsApp or by mail. We guarantee a very prompt response and look forward to a perhaps even long-term cooperation. With kind regards Maschinenhandel Richter Inh. Enrico Richter Cgeln E Hsh Nurbj Hmet

Year of construction: 1995, Condition: not inspected (used), The crane is dismantled. Inspection book available. Cgsln E H Hof Sfwtsmjt

Condition: good (used), Roller conveyor, frame and substructure made of stainless steel, transport height 1170mm, roller width 400 mm, length roller conveyor 3000mm Cjln Esuhd Scs H Hmogt - used, very good condition, available immediately

Year of construction: 2015, Condition: ready for operation (used), Functionality: fully functional, Single girder crane runway EHB, type Abus, 250 kg load capacity, steel superstructure HB system, height to lower edge of cantilever 3,800 mm, overall dimensions width 10 m, depth 10 m, height 4 m, Cjln Eju Nywaj H Hmjgt

Condition: good (used), Functionality: fully functional, SHIPPING AVAILABLE 🚚 - Brand: Timmer - Part no.: 53508140 (replaced by 53508299) - Max. flow rate approx. 65 l/min. - Pressure ratio 3:1 - Housing in contact with the product: Aluminum - PTFE composite diaphragm - Valve ball seats: Stainless steel Cgelot Hfa Tsn E H Hmst - Valve balls: Stainless steel - Seals: FEPM - Side parts: Stainless steel - Brand NEW product - Shipping or store pickup available - VAT 21% NOT included (deductible for professionals)

Condition: ready for operation (used), Hadef chain hoist Load capacity: 2500 kg Hook path: 4,40m Lower edge of beam - lower edge of hook: 70 cm Lifting speed: 4.0 / 1.0 m/min You are welcome to visit us for an inspection. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Csln E H Heu Iamfsmegt Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Various crane traverses, very good condition, ready for immediate use Cgslod Tx Awen E H Hmjt

Year of construction: 1989, Condition: not inspected (used), The crane is dismantled. Inspection book available. Coljf Sfxqsn E H Hmjgt

Year of construction: 2022, Condition: new, Functionality: fully functional, overall weight: 293 kg, maximum load weight: 250 kg, total length: 7,230 mm, total width: 346 mm, lifting height: 3,000 mm, utility frequency: 50 Hz, electrical fuse: 16 A, fine lifting speed: 34 mm/s, main lifting speed: 8,000 mm/min, nominal voltage: 400 V, protection type (IP code): IP65, machine/vehicle number: LW, 2x Abus wall-mounted jib crane + Abus chain hoist ( as good as new ) - Price per set The LW wall-mounted slewing jib crane is designed for mounting on a wall or support. Colot I S N Don E H Hmjgt This workplace crane offers you a working radius of up to 180° with an outreach of up to 7 m and a load capacity of up to 250 kg. Unobtrusive and reliable, the LW wall-mounted slewing jib crane helps you to move low loads by hand. Thanks to its lightweight design, it and the load can be guided quickly and precisely, even with large outreaches, providing you with effective support in your daily work. Chain hoist tare weight: 21.8 kg The sale is subject to the exclusion of any warranty.

Year of construction: 2021, Condition: excellent (used), outlet system: 8 Outlets, 4/3 Solenoid Valve, motor voltage: 400 V, tank capacity: 150 l, machine/vehicle number: -, Maximum Operating Pressure (bar) 700 Cylinder Compatability Single-acting, Double-Acting Reservoir Capacity (cm3) 150000 Reservoir Capacity (litres) 150 Maximum Flow at Rated Pressure 1,30 l/min Oil Flow per Outlet at 700 bar (l/min) 1,30 Number of Outlets 8 Motor Size (kW) 15 Motor Hertz 50 Hz Motor Phases 3 Ph Motor Voltage 380-415 V Duty Cycle Extended Valve Function Advance / Hold / Retract Valve Operation Solenoid Valve Type 4-way, 3-position Cjln Eoqmfq Rj H Hmogt Power Source Electric Pump Control Pendant Motor Electrical Specification 400 V, 3 Ph, 50 Hz Weight (kg) 590 We have 15 of these hydraulic pumps. Same Condition. You can buy whole or just one.

Year of construction: 2021, operating hours: 50 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 221013, max. load 100kg Celn E Hovf Nhvo Hmsgt Tools for barrels and drums Forklift movable ATEX version

Year of construction: 2009, Condition: excellent (used), Functionality: fully functional, maximum load: 2,000 kg, machine/vehicle number: 62783, Technical Specifications: Brand: RWM SRL Model: CE/W2000 T2 V2 Year of Construction: 2009 Serial Number: 62783 Lifting Capacity: 2000kg Condition: Used, Currently out of operation Available Documentation: Celn E H Hjuc Tddomjgt Use and Installation Guide Maintenance Manual

Condition: used, Column-mounted slewing crane, slewing crane Demag PK5N-F chain hoist with normal and fine hoist, jib 4m long, already dismantled, loaded on pallet. Celn E H Hjcalfkomegt Very good condition

Year of construction: 1990, Condition: not inspected (used), The crane is dismantled. Coln Eef Sftls H Hmjgt Storage location Oebisfelde.

Year of construction: 2021, operating hours: 150 h, Condition: good (used), operating pressure: 700 bar, cylinder diameter: 204 mm, cylinder height: 349 mm, cylinder stroke: 203 mm, lifting capacity: 150 kg, net weight: 111 kg, machine/vehicle number: -, RRH-Series Hollow Plunger Hydraulic Cylinders are ideal for tensioning, testing, pulling, and lifting applications. The hollow bore, base threaded holes and collar thread allow attachments that enable the cylinder to deliver both pull and push forces. RRH double-acting center-hole hydraulic cylinders feature two connection ports to provide hydraulic flow to both advance and retract the plunger. This provides a more controlled retraction than single-acting cylinders. Cylinders in the RRH-Series are constructed from high-alloy steel and finished with a baked enamel exterior coating. Collar threads and base holes for easy fixturing are provided as standard. Enerpac has designed and manufactured 10,000 psi (700 bar) high-pressure hydraulic cylinders for many decades. We use only the highest quality materials to ensure they can withstand the most demanding applications. All RRH cylinders meet the safety standards required for high-pressure hydraulic tools. Relief valves prevent damage in case of over-pressurization Baked enamel finish for increased corrosion resistance Double-acting operation for fast retraction Nickel-plated, floating center tube increases product life Hollow plunger allows for both pull and push forces CR-400 couplers and dust caps included on all models Plunger wiper reduces contamination, extending cylinder life Cgsln Ejqmnf No H Hmst We have 90 of these hydraulic cylinders. Same Condition. You can buy whole or just one.

Year of construction: 2004, Condition: excellent (used), Functionality: fully functional, maximum load: 1,000 kg, machine/vehicle number: 40119, Technical Specifications: Brand: RWM SRL Model: W 1000 T1 V2 Year of Construction: 2004 Cgjln E Het Dxmue Hmot Serial Number: 40119 Lifting Capacity: 1000kg Condition: Used, Currently out of operation

Condition: good (used), Demag chain hoist Celn E H Hjcalf Asmsgt Design PK2N-F, PK2N Lifting capacity 250(1-leg) or 500kg(2-leg), Example photo, different versions available, ready to use condition.